Aimco Brakes Freedom3 PRW Sqnet User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 PRW Sqnet User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 2
2 2 Revision History General Terms All Rights reserved. Specifications are going to change without notice. Trademarks are the property of SCS Concept and their respective owners. SCS Concept reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified...
Page 3
[email protected] 3 Battery information according European regulation 2006/66/CE Part no: 313 21 0042 Type: Li-Ion 3.7V 2600 mAh Weight: 84 g After removed, the wasted battery must be dismissed according local regulation
Page 4
4 4 Revision History Revision History Edition Date Description Firmware Version 1.0 02/04/2012 First Edition V8.2k 2.0 15/02/2013 Second Edition PRW -SQnet
Page 5
[email protected] 5 Contents USER MANUAL ........................................................................................................................... 1 GENERAL TERMS ................................................................................................................................................................. 2 TERMS OF WARRANTY...
Page 6
6 6 Contents Freedom³ SPC Setup Menu ................................................................................. Errore. Il segnalibro non è definito. Freedom³ PRW Setup Menu .................................................................................................................................... 74 PART NUMBERS ................................................................................................................................................................ 80...
Page 7
[email protected] 7 Freedom³ PRW mode Tour Freedom³ PRW mode is an Electronic Wrench designed for High Level Tightening on all types of production line. Freedom³ allows to analyze torque & angle statistic graphs, on SQnet FTA software. PRW mode ,this firmware version is specially designed to have tightening programs. The wrench can be programmed off-line by SQ-net FTA software. By SQnet FTA, user must create a route (list of tightening programs) and send it to...
Page 8
8 8 Freedom³ PRW mode Tour Programming SQnet FTA Before to start to use Freedom³ PRW, user has to program SQnet FTA, in order to send the tightening operations (route) to the wrench. In SQnet FTA is possible to reproduce part or all assembly line stations in a “Tree Structure” and create tightening program to link to every single location. Once the tree structure is built, user can create a route (list of tightening...
Page 9
[email protected] 9 Sending a route After route is created, user can send it to Freedom³ by USB port. In few seconds the wrench is ready to work.
Page 10
10 10 Freedom³ PRW mode Tour Production Tightening Once route is uploaded on Freedom³, user can run every single program and start the tightening operations. When the route is completed or a part of it, user can send data-results to SQnet FTA.