Aimco Brakes Cordless Tool Signature Series SPC2PGM Tool Speed Programmer User Manual

11
OnDly×500ms Setting
For trigger delay after clutch trip option
Step1: Press “ENTER” for mode 
selection .
Press ENTER for mode selection.
Step 2: Press “” to find the 
“OnDly x 500ms” Mode then press 
“EDIT” to enable changes .
Press EDIT to enter OnDlyx500ms mode.
Step 3: Press “+” or “–” to select the 
number of OnDly x 500ms desired .
(1) “0” setting: Trigger will activate on 
command without delay between 
clutch trip  .
(2) “0 – 120” setting: Trigger will not 
allow tool to start after clutch...

12
Fwd_W_LED_Tmr Settings:
To extend the luminosity of LED while in Forward operation 
Step 1: Press “ENTER” for mode 
selection .
Press ENTER for mode selection.
Step 2: Press “” to find the 
Fwd_W_LED_Tmr Mode, then press 
“EDIT” to enable changes .
Press EDIT for enter  Fwd_W_LED_Tmr Mode.
Step 3: Press “+” or “– “ to set the 
amount of time the LED will remain lit 
while in Forward (CW) operation .  The 
time can be set from 0 to 60 seconds  . 
Longer set times may reduce time 
between battery...

13
Rev_W_LED_Tmr Settings:
To extend the luminosity of LED while in Reverse operation
Step1: Press “ENTER” for mode 
selection .
Press ENTER for mode selection.
Step 2: Press “” to find the 
“Rev_W_LED_Tmr” Mode, then press 
“EDIT” to enable changes .
Press EDIT to enter  
Rev_W_LED_Tmr Mode.
Step 3: Press “+” or “– “ to set the 
amount of time the LED will remain lit 
while in Reverse (CCW) operation .  The 
time can be set from 0 to 60 seconds  . 
Longer set times may reduce time 
between battery...

14
INFORMATION MENU
Product ID
Built-in information set by factory . 
Used for production tracking 
purposes  . Tool S/N is etched into tool 
housing base at battery slide mount .
 
Total  Used Time
Total time the tool motor has 
operated .  Value is not changeable  .
Total Count
Total number of clutch trips that are 
successful (G) . Clutch trips from 
double hits are excluded (NG) .  Value 
is not changeable . 
Trip Count
Total number of clutch trips that are 
successful (G) since value was last...

15
NOTES 

16
Corporate Headquarters 10000 SE Pine Street Portland, OR 97216800-852-1368FAX 800-582-9015www.aimco-global.com
Ave.Cristóbal Colon 14529Chihuahua, Chihuahua. 31125Mexico011-52-(614) 380-1010FAX 011-52-(614) 380-1019
LIT-MAN255, Rev. 01/14Printed in USA©2013 AIMCO