AGFA AP OPTIMA 145 User Manual

							58
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
Wallpaper Settings
Use ths settng to select your favorte pcture as a 
background on the LCD screen.
1
.  Press the Down button to select the Wallpaper Sett ng 
menu. 
2.  Press the  or Rght button to enter the wallpaper 
setup nterface.
 
Menu Wallpaper:
Use the Up/Down button to select the Menu Wallpaper 
opton, Press the  button to confirm the settng or press 
the Left button to return to the last page, and press  
to ext the menu. 
•  User
•  AgfaPhoto
•  Sparklng 
						

							AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
59
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
Startup Screen: 
Use the Up/Down button to select the Startup Screen 
opton, press 
 to confirm or press the Left button to 
return to last page, and press 
 to ext the menu.
•  User
•  AgfaPhoto
Set back to default: 
Use the Up/Down button to select Back To Default, press 
 to confirm or press the Left button to return to last 
page, and press 
 to ext the menu.
•  Yes
•  No 
						

							6061
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Setup Menu
Mode : AUTO        
 
The Setup menu for the camera s avalable n all modes. 
Each menu page can be selected by pressng the  
button and swtchng between menus wth the Left/Rght 
button.
To adjust the settngs:
1.  Select the menu page wth the functon you want to 
adjust and press the Down button. 2.
  
Swtch between dfferent functons wth the  Up/Down 
button.
3.

  Press the  Right button to enter the submenu.
After select

ng a functon opton, you can press the 
Up button to return to the menu for other Camera 
Setup pages. Or you can press the Down button to 
sw
 tch to the next menu page.
Refer to the followng pages for more detals about each 
settng.
Beep
Use  th s  sett ng  to  adjust  the  beep  volume  when  buttons 
are pressed and change the tones for Shutter button, self-
t mer, and power-on/power-off.
To change ths settng:
1.  S e l e c t   t h e   B e e p
 
 s e t tn g   f r o m   t h e   S e t u p
  m e n u   a s 
descr
bed prevously.
2.  Use the  Up/Down
 nav
 gaton buttons to swtch 
between volume, shutter, key, self-tmer, and power 
fields. 
						

							6061
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
61
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
3. Press the Rght button, then press the Up/Down button 
to adjust volume and change tones, and press the 
 
button to confirm the settng.
LCD Brightness
Use ths settng to adjust the brghtness of your LCD 
screen.
1.
  Select the LCD Brightness sett
 ng from the Setup 
menu as descr
bed prevously.
2.  Select auto or adjust the brghtness level by usng the 
Left/Rght button, and press the 
 button to confirm 
the settng. 
						

							62
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
6263
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Power Saver
Ths settng allows you to save power and get the 
maxmum possble runnng tme from your batteres. Follow 
the steps below to turn off the LCD screen and camera 
automat

cally after a perod of nactvty.
1.  Select the  Power Save sett
ng from the Setup menu as 
descr
bed prevously.
2.  Press the Up/Down button to select the power tems 
for the screen and camera and press the Rght button.
3. Press the Up/Down button to adjust the selected tem. 
Both tems have the followng optons:
•  LCD Off : 
30 sec, 1 m
 n, 2 mn, and ON.
•  Camera Off : 
3 m

n, 5 mn, 10 mn, and ON.
4.  Press the 
 button to confirm.
Date/Time
See “ Setting
 the
 Date
 and
 Time
“ sect on on page 16.
World Time
The World Tme settng s a useful functon on your 
overseas trps. Ths feature enables you to dsplay the local 
tme on the LCD screen whle you are overseas.
1. Select the World Time sett
 ng from the Setup menu as 
descr
bed prevously. The world tme screen wll appear.
2.  Use the  Up/Down nav
 gaton buttons to swtch 
between the hometown (  ) and travel destnaton  
(  ) fields.
3.  Use the  Left/Right nav
 gaton buttons to select a cty 
close to the desred tme zone. Then press the 
 
button to confirm. 
						

							AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
6263
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Language
See “Setting
 the
 Language
“ sect on on page 15.
Format Memory
Please note: formattng enables you to delete all contents 
n the memory card and bu lt- n memory,  nclud ng protected 
photo and move files.
To use ths settng:
1.  Select Format 
 n the Fle and Software menu.
2.  Use the  Up/Down
 nav
 gaton buttons to select  Yes
 or 
No . Then press the  button to confirm.
3.  The current meda s formatted.
4.   Please note that when you perform the Format Memory 
funct on,  t only formats the act ve memory. If a memory 
card  s  nserted, the memory card  s act ve and w ll be 
formatted. If there  s no memory card, the  nternal memory 
 s act ve and the  nternal memory w ll be formatted. 
Formatt ng the memory card w ll not automat cally format 
the  nternal memory.
Fle and Software 
						

							64
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
File Numbering
After you take a pcture or vdeo clp, the camera wll save 
t as a file that ends wth a seral number. You can use ths 
tem to choose whether the file s numbered sequentally or 
begns wth 1 and s saved n another folder n the memory 
card.(When more than 999 mages are on the memory card, 
the use of ths features wll have no effect.)
1.  Select the F
 le Name n the Fle and Software menu.
2.  Select the opt
 on wth the Up/Down button and press 
the  button for confirmaton.
Copy to Card (Copy internal memory to 
memory card)
Use ths settng to copy the files stored n the nternal 
memory to the memory card.
1.  Select the Copy to memory card 
 n the Fle and 
Software menu.
2.  Use the Up/Down nav
 gaton buttons to select Yes or 
No. Then press the  button to confirm. 
						

							AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
65
AgfaPhoto OPTIMA 145AgfaPhoto OPTIMA 145
FW Version (Firmware Version)
Use this setting to view the current camera firmware 
version.
1. Select  FW Version
 in the File and Software menu.
2.  If SD card contains a new version of firmware, please 
upgrade accordingly as necessary.
Reset Settings
Use this setting to restore the camera to its default 
settings.
1.  Select Reset settings in the File and Software menu.
2.  Use the Up/Down navigation buttons to select Yes or 
No. Then press the 
 button to confirm. 
						

							66676667
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
The vdeo output sgnal can be swtched to NTSC or PAL to 
accommodate dfferent regonal standards. The approprate 
settng wll vary between regons.
NTSC:  USA, Canada, Ta
 wan, Japan, etc.
PAL:  Europe, Asa (excludng Tawan), Oceana, etc.
Note:   
The TV output w
 ll not perform properly f an 
ncorrect vdeo system s selected.
Use ths settng to configure your vdeo system to your 
current area.
1.
   Select the Video System  n the Connecton Setup 
menu.
2.
  Use the  Up/Down nav
 gaton buttons to select NTSC or 
PAL. Then press the  button to confirm. 
Vdeo System
Transmsson 
						

							66676667
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Connectng to a PC
Use the USB cable suppled wth your camera to copy 
(transfer) pctures to a computer.
Setting the USB mode
Snce the camera’s USB port can be set to connect wth 
ether a PC or a Prnter, the followng steps wll allow you to 
ensure that the camera s correctly configured to connect 
wth a PC.
1. Go to the camera settng menu, select USB connecton 
wth the Up/Down button, and press the Rght button.
2.  Use the  Up/Down
 nav
 gaton buttons to select  PC
.
3.
  Press the 
 button to confirm the settng.
Transferring files to your PC
The computer wll automatcally detect the camera as a 
removable drve. Double-clck  My
 Computer
  con on the 
desktop to locate the removable drve and to copy the 
folders and files n the drve to a drectory on your PC as 
you would copy any typcal folder or file.
By usng the USB cable, you can transfer the captured 
photos and vdeos to a PC. Follow the steps below to 
connect the camera to a PC.
1.

  Make sure both the camera and PC are turned on. 
2.  Connect one end of the suppled USB cable to the USB/
AV OUT port on your camera.
3.

  Connect the other end of the cable to an avalable USB 
port on your PC.