ADT Security Services Medical Alert Plus User Manual

 AD T ®
  H e alth  
Medical Alert Plus System  
User Guide   

2 
ADT ®
 Health Customer Support 800.568.1216  Table of Contents 
Introduction 
.....................................................................................................................................................  3 
Connecting the Medical Alert Plus Base Station  .................................................................................... 6 
Step 1. Select a Location...

Medical Alert Plus System User Guide 
3 Introduction 
Thank you for choosing the ADT ®
 Medical Alert Plus System. We welcome you to the 
ADT  family.  If  you  have  any  questions  please  call  our  support  team  at 
800.568.1216. They are available 24/7/365. 
The  Medical  Alert  Plus  System  is  comprised  of  a  Digital  Cellular  Base  Station  and  a 
wireless  Emergency  Help  Button  (Wristband,  standard  Neck  Pendant  or  Fall 
Detection  Pendant).  Because  the  connection  is  cellular,...

4 
ADT ®
 Health Customer Support 800.568.1216  What’s in the Box
  

Medical Alert Plus System User Guide 
5 Medical Alert Plus Base Station Features  

6 
ADT ®
 Health Customer Support 800.568.1216  Connecting the Medical Alert Plus Base Station 
Please follow these simple steps to get the system set up and tested. 
Step 1. Select a Location 
Place the Base Station near the center of your home, such as your living room, 
family room or kitchen area.  
 Place the Base Station near an electrical outlet. 
 Do not  place the Base Station near any appliances that make noise. 
 Do not  place objects in front of the Base Station.   

Medical Alert Plus System User Guide 
7 Step 2. Plug in the Power Cord 
Plug the power cord that is attached to the back of the Base Station into an 
electrical outlet that is not controlled by a light switch. Refer to the figure in 
Step 3.  To avoid accidentally turning off the Base 
Station, DO NOT plug it into an electrical outlet 
that is controlled by a light switch.  
WARNING  
To prevent electrical shock  please keep the system away 
from wet locations.   

8 
ADT ®
 Health Customer Support 800.568.1216  Step 3. Turning on the Base Station 
1.
Turn on the Base Station using the ON/OFF switch located on the back of the
unit. 

Medical Alert Plus System User Guide 
9 If set up correctly,  

  The EMERGENCY and RESET buttons illuminate red and blue, respectively .  
   The display screen turns on.  
   The Base Station says “ SYSTEM READY.”  
   Within a few minutes of turning on the system, the Base Station obtains the date 
and time from the digital cellular network and displays it on the screen. 
Note:  You cannot set the date and time manually.  
2. Use the  – and + volume control (   ) buttons on the front of the unit...

10
  ADT ®
 Health Customer Support 800.568.1216  Step 4. Testing the Base Station  
Use  the  Test  button  on  the  Base  Station  to  make  sure  that  the  system  is  working 
without placing a call to an emergency operator.