ADT Security Services iCenter 8132 User Manual

iCenter/iCenter-i Setup (Contd) 
61 
 
How to Adjust the Volume  
You may adjust the iCenter/iCenter-i speaker volume by pressing your finger on the 
touch screen slide bar associated with the Volume scale and doing the following: 
If… Then… 
you want to increase volume  press the slide bar above the current volume setting. 
you want to decrease volume  press the slide bar below the current volume setting. 
AUI-019-V0
VOLUME
SLIDEBAR
INDICATOR
 
iCe nt e r/iCe nt e r
iCe nt e r/iCe nt e r iCe nt e r/iCe...

iCenter/iCenter-i Setup (contd) 
62 
 SCREEN ACTION 
 2.  Select the time period option you want by 
pressing it.  The pop-up window closes 
automatically and the selection is displayed in 
blue. 
NOTE:  Additional options can be viewed by 
using the up/down arrows to scroll through 
the time period options. 
 
 
 3.  Press either the Home or Back icon.  A 
Settings Changed! pop-up window is displayed 
stating “ROOT UPDATE – In Progress! 
Please Wait…”   W hen the Root Update is 
complete...

iCenter/iCenter-i Setup (Contd) 
63 
 
How to Set the Time and Date 
You can set the time and date from the Set Time & Date
Set Time & DateSet Time & Date Set Time & Date screen. This screen can be 
accessed by pressing the Time and Date bar located at the bottom of each 
iCenter/iCenter-i screen.   
• Since Sync With Network Clock
 Sync With Network Clock Sync With Network Clock  Sync With Network Clock is always selected on the Set Time & Date
Set Time & DateSet Time & Date Set Time & Date 
screen,...

iCenter/iCenter-i Setup (contd) 
64 
 
Time Zones
Time ZonesTime Zones Time Zones 
    
Using the chart below, select the time zone number corresponding to the location of 
the installation
. 
Time  Zone  Se ttings
Time  Zone  Se ttingsTime  Zone  Se ttings Time  Zone  Se ttings 
    
Z
A
B
C
D
F
G
H
I
N
O
P
Q
R
S
T
U
W
E
STANDARD TIME ZONES
Corrected to June 2000Zone boundaries are approximate
Daylight Saving Time (Summer Time),
usually one hour in advance of Standard
Time, is kept in some places
Map...

iCenter/iCenter-i Setup (Contd) 
65 
 
How to Calibrate the Touch Screen 
Calibrate the touch screen as follows:  
SCREEN ACTION 
 1.  From the Home screen, press the 
SECURITY button.  The Arming screen is 
displayed. 
 2.  From the Arming screen press the MORE 
CHOICES button.  The More Choices screen 
is displayed. 
 
 3.  Press the SETUP button on the More 
Choices screen.  The Setup screen is 
displayed. 
 
 4.  Press the ADVANCED SETUP button on 
the Setup screen.  The User Authorization 
screen is...

iCenter/iCenter-i Setup (contd) 
66 
 SCREEN ACTION 
 5.  Enter your “Master” code.  The “Advanced 
Setup” screen is displayed. 
 
 6.  Press the DIAGNOSTICS button on the 
Advanced Setup menu screen.  The 
Diagnostics screen is displayed. 
 
 7. Begin the Touch Screen calibration from the 
Diagnostics screen by pressing the 
Calibrate button. W hen the Calibrate button is 
pressed, the Touch Screen Calibration 
screen is displayed. 
 
 8.  W ithin the Touch Screen Calibration 
screen you are asked to...

iCenter/iCenter-i Setup (Contd) 
67 
 SCREEN ACTION 
 
 9.   Press the center of the square. The Touch 
Screen Calibration screen displays Next 
press the box in lower right corner. 
 
 10. Press the center of the square. The Touch 
Screen Calibration screen displays Next 
press the box in lower left corner. 
  

iCenter/iCenter-i Setup (contd) 
68 
 SCREEN ACTION 
 
 10.  Press the center of the square. The 
Touch Screen Calibration screen displays 
Touch target to verify calibration.  
If touch screen calibration was not successful, 
Calibration Unsuccessful is displayed 
momentarily. You are then returned 
automatically to the first Touch Screen 
Calibration screen. 
NOTE: You will progress through the Touch 
Screen Calibration screens regardless of 
where you touch. To successfully calibrate the 
touch...

Maintaining Your System 
69 
 
Replacing Batteries In Wireless Sensors 
 
 
 Wireless sensors may not have been used in your security system. 
If your system has wireless sensors, each wireless sensor in your system has a 9-
volt or 3-volt battery. The system detects a low battery in any wireless sensor, 
including smoke detectors, the optional personal emergency transmitter, and the 
optional portable wireless Touchpad. (A low battery in a portable wireless Touchpad 
is detected as soon as one of its...

Maintaining Your System (contd) 
70 
 
How to Clean your iCenter/iCenter-i 
IMPORTANT:
IMPORTANT:IMPORTANT: IMPORTANT:  Do not use an abrasive cleaning agent or abrasive cloth when 
cleaning your iCenter/iCenter-i or damage to the touch screen may occur.  
Clean iCenter/iCenter-i as follows: 
SCREEN ACTION 
 1.  From the Home screen, press the 
SECURITY button.  The Arming screen is 
displayed. 
 
 2.  Press the MORE CHOICES button.  The 
More Choices screen is displayed. 
 
 3.  Press the SETUP button...