ADT Security Services iCenter 8132 User Manual

Fire Alarm System Operation (Contd) 
31 
 
• Install a smoke detector at both ends of a hallway if the hallway is more than 40 
feet (12 meters) long. 
• Install smoke detectors in any room where an alarm control is located, or in any 
room where alarm control connections to an AC source or phone lines are made. 
If detectors are not so located, a fire within the room could prevent the control 
from reporting a fire or an intrusion. 
Recommendations For Proper Intrusion Protection 
For proper intrusion...

Fire Alarm System Operation (contd) 
32 
 
8.  Establish a common meeting place outdoors, away from your house, where 
everyone can meet and then take steps to contact the authorities and account for 
those missing. Choose someone to assure that nobody returns to the house — many 
die going back. 
 
 
  

 
33 
 
User Code Setup 
 
Introduction to User Code Setup 
Each user must be assigned a name with a corresponding 4-digit user code in order 
to gain access to various features and functions. Through iCenter/iCenter-i, you may 
program users to access any and all of the following systems: 
• Fire/Burglary 
• Internet 
Users for the systems are programmed in a central user setup location that provides 
the specific questions for the user pertaining to each system.  You may want these 
users to be the...

User Code Setup (contd) 
34 
 SCREEN   ACTION 
 3.  Press the SETUP button on the More 
Choices screen.  The Setup screen is 
displayed. 
 
 
 4.  Press the USER SETUP button on the 
“Setup” screen.  The User Setup screen is 
displayed. 
 
  

User Code Setup (Contd) 
35 
 
How to Add a User 
Add a user as follows: 
SCREEN   ACTION 
 NOTE:  Three selections are available: add a 
user, edit a user, or delete a user. 
1.  To add a use, press the ADD USER button.  
The User Authorization screen is displayed 
with the instructions Enter Authorized Code. 
 
 2.  Enter your “Master” code.  The “User 
Options” screen is displayed. 
 3.  Press the box next to Enter User Name.  
The Enter Data keyboard screen is displayed. 
 4.  Type in the user name...

User Code Setup (contd) 
36 
 SCREEN   ACTION 
 5.  Touch the box next to with Enter User 
Code…  The User Authorization screen is 
displayed with the instructions Enter 4 Digits. 
 
 6.  Enter the 4-digit code for this user.  The 
“User Options” screen is displayed with the 
user’s name and code displayed.   
 
 
 7.  Select the partitions and access level for 
this user.  
NOTE:  If this user is to have Internet access, 
continue to step 8.  If this user is to have 
security access only, press the SAVE...

User Code Setup (Contd) 
37 
 SCREEN   ACTION 
 
 9.  To provide this user with Internet access 
press the box next to Enable User for Web 
Access until a check appears.  You may also 
select the Auto Switch to WEB on Disarm 
option at this time. 
 
 10.  Press the SAVE button.  The system will 
save the configuration.  W hen the save is 
complete, the User Setup screen is displayed 
with the new user’s name shown. 
 
 
 
  

User Code Setup (contd) 
38 
 
How to Delete a User 
Delete a User as follows: 
SCREEN ACTION 
 1.  From the User Setup screen, touch the 
circle next to the user to be deleted and press 
the DELETE USER button.  The User 
Authorization screen is displayed with the 
instructions Enter Authorized Code:. 
 2.  Enter your “Master” code.  The Confirm 
Delete screen is displayed. 
 3.  Press the appropriate button.  The User 
Setup screen is displayed. 
  
  

User Code Setup (Contd) 
39 
 
How to Edit a User 
Edit a user as follows: 
SCREEN   ACTION 
 1.  From the User Setup screen, touch the 
circle next to the user to be edited and press 
the EDIT USER button.  The User 
Authorization screen is displayed with the 
instructions Enter Authorized Code:. 
 2.  Enter your “Master” code.  The “User 
Options” screen is displayed. 
 
 3.  Select whatever options you wish to select 
for this user and press the SAVE button.  The 
configuration changes are saved and...

User Code Setup (contd) 
40