Home
>
Addonics Technologies
>
Multi-Bay Enclosure
>
Addonics Technologies Storage Rack Rackmount Chassis srda User Manual
Addonics Technologies Storage Rack Rackmount Chassis srda User Manual
View the Addonics Technologies Storage Rack Rackmount Chassis srda User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
92
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Installing Bridge Boards on Mounting Poles Inside
the Storage Rack
Separate PM or HPM from bracket by unscrewing 4 screws on the PCB. Insta\
ll
the PM or HPM onto the desired mounting pole.
Installing Bridge Boards onto Back Panel
Remove punch outs from the rear panel of the Storage Rack. Using the inc\
luded
screws, attach bridge board onto the desired back panel mounting...](http://img.usermanuals.tech/thumb/181/2655/w300_storage-rack-rackmount-chassis-srda-1478578441_d-2.png "Page 3
92
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Installing Bridge Boards on Mounting Poles Inside
the Storage Rack
Separate PM or HPM from bracket by unscrewing 4 screws on the PCB. Insta\
ll
the PM or HPM onto the desired mounting pole.
Installing Bridge Boards onto Back Panel
Remove punch outs from the rear panel of the Storage Rack. Using the inc\
luded
screws, attach bridge board onto the desired back panel mounting...")
![Page 4
38
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
At the bottom of the drive cage, locate the metal base corresponding to \
the storage
device inserted in the previous step and secure it onto the drive cage.
When you finished, install the drive cage now populated with the devices\
back
into the Storage Rack.
How to Remove the 5 ¼”
Drive Bay Front Panels:
1. Locate the 3 screws for each
front panel.
2. Turn screws...](http://img.usermanuals.tech/thumb/181/2655/w300_storage-rack-rackmount-chassis-srda-1478578441_d-3.png "Page 4
38
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
At the bottom of the drive cage, locate the metal base corresponding to \
the storage
device inserted in the previous step and secure it onto the drive cage.
When you finished, install the drive cage now populated with the devices\
back
into the Storage Rack.
How to Remove the 5 ¼”
Drive Bay Front Panels:
1. Locate the 3 screws for each
front panel.
2. Turn screws...")