Home
>
Addonics Technologies
>
Multi-Bay Enclosure
>
Addonics Technologies Storage Tower MST5HMXA user guide
Addonics Technologies Storage Tower MST5HMXA user guide
View the Addonics Technologies Storage Tower MST5HMXA user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Note: You need to verify that the eSATA port you are connecting the tower is port
multiplier compatible. If it is connected to a non-port multiplier compa\
tible host
controller, the operating system will only see one drive out of the five connected\
and that is the drive connected to port 1.
For example, when the tower is connected to a SATA Host controller with SiI3124
or...](http://img.usermanuals.tech/thumb/181/2642/w300_storage-tower-mst5hmxa-user-guide-1478577661_d-1.png "Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Note: You need to verify that the eSATA port you are connecting the tower is port
multiplier compatible. If it is connected to a non-port multiplier compa\
tible host
controller, the operating system will only see one drive out of the five connected\
and that is the drive connected to port 1.
For example, when the tower is connected to a SATA Host controller with SiI3124
or...")
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Default factory DIP Switch setting:
SW1 – RAID Setting DIP Switch
BZS – Error buzzer function
EZ – Automatic rebuilding to spare drive (one of the drives on the raid is s\
et as a
spare). If EZ is ENABLED anda drive failure occurs, the spare will
automatically act as a drive replacement and rebuilding will automatical\
ly
start.
M2 – RAID mode 2
M1 – RAID...](http://img.usermanuals.tech/thumb/181/2642/w300_storage-tower-mst5hmxa-user-guide-1478577661_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Default factory DIP Switch setting:
SW1 – RAID Setting DIP Switch
BZS – Error buzzer function
EZ – Automatic rebuilding to spare drive (one of the drives on the raid is s\
et as a
spare). If EZ is ENABLED anda drive failure occurs, the spare will
automatically act as a drive replacement and rebuilding will automatical\
ly
start.
M2 – RAID mode 2
M1 – RAID...")