Home
>
Addonics Technologies
>
HDD/SSD/Optical Drive Enclosure
>
Addonics Technologies Ruby 25 HDDSSD drive kit RDCSSAESU user guide
Addonics Technologies Ruby 25 HDDSSD drive kit RDCSSAESU user guide
View the Addonics Technologies Ruby 25 HDDSSD drive kit RDCSSAESU user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Step 4
Turn over the PCB and secure the hard drive to the PCB with the mounting \
screws
that come with the kit.
Step 5
Mount the board to the bottom cover.
Step 6
Put the top cover on by holding it in near vertical position and sliding\
the two metal
clips inside the two small slots on the rear of the bottom cover.
Step 7
Lower the front of the top cover and making sure the two...](http://img.usermanuals.tech/thumb/181/2619/w300_ruby-25-hddssd-drive-kit-rdcssaesu-user-guide-1478576281_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Step 4
Turn over the PCB and secure the hard drive to the PCB with the mounting \
screws
that come with the kit.
Step 5
Mount the board to the bottom cover.
Step 6
Put the top cover on by holding it in near vertical position and sliding\
the two metal
clips inside the two small slots on the rear of the bottom cover.
Step 7
Lower the front of the top cover and making sure the two...")
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Ruby Enclosure
Switch:
INT: This mode is used when the enclosure is placed inside a drive cradle. Fo\
r
drive cartridge system kits, this is the mode used.
EXT: This mode is used if the enclosure is used as an external hard drive.
Ruby Drive Cradle
Note: You can only use one power connector at a time. Either use the 4-pin
Molex or 15-pin SATA connector but do not simultaneously...](http://img.usermanuals.tech/thumb/181/2619/w300_ruby-25-hddssd-drive-kit-rdcssaesu-user-guide-1478576281_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Ruby Enclosure
Switch:
INT: This mode is used when the enclosure is placed inside a drive cradle. Fo\
r
drive cartridge system kits, this is the mode used.
EXT: This mode is used if the enclosure is used as an external hard drive.
Ruby Drive Cradle
Note: You can only use one power connector at a time. Either use the 4-pin
Molex or 15-pin SATA connector but do not simultaneously...")