Home
>
Addonics Technologies
>
HDD/SSD/Optical Drive Enclosure
>
Addonics Technologies Diamond 35 Hard Drive DDCS user guide
Addonics Technologies Diamond 35 Hard Drive DDCS user guide
View the Addonics Technologies Diamond 35 Hard Drive DDCS user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
Hardware Installation Guide
Step 1
Use a Philips screwdriver to turn the cover securing screw into the “\
OPEN” position.
Step 2
Slide the aluminum cover towards the back end of the Diamond and remove \
it.
Step 3
For SATA Drive
Carefully place the SATA hard drive with the label facing up into the Diamond
enclosure. Push the hard drive towards the back end to secure the drive\
connectors onto the Diamond enclosure’s SATA connector.
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone:...](http://img.usermanuals.tech/thumb/181/2617/w300_diamond-35-hard-drive-ddcs-user-guide-1478576161_d-1.png "Page 2
Hardware Installation Guide
Step 1
Use a Philips screwdriver to turn the cover securing screw into the “\
OPEN” position.
Step 2
Slide the aluminum cover towards the back end of the Diamond and remove \
it.
Step 3
For SATA Drive
Carefully place the SATA hard drive with the label facing up into the Diamond
enclosure. Push the hard drive towards the back end to secure the drive\
connectors onto the Diamond enclosure’s SATA connector.
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone:...")
![Page 3
For IDE Drive
Note: Set up your IDE hard drive as Master device
Connect the 4-Pin Molex cable to the power connector on the IDE hard dri\
ve.
Carefully place the IDE hard drive with the label facing up into the Dia\
mond
enclosure. Push the hard drive towards the back end to secure the drive\
connectors onto the Diamond enclosure’s IDE connector.
Step 4
Turn the Diamond enclosure over with the hard drive mounting holes facing\
up. Use
the included flat head screws to secure the hard drive onto the...](http://img.usermanuals.tech/thumb/181/2617/w300_diamond-35-hard-drive-ddcs-user-guide-1478576161_d-2.png "Page 3
For IDE Drive
Note: Set up your IDE hard drive as Master device
Connect the 4-Pin Molex cable to the power connector on the IDE hard dri\
ve.
Carefully place the IDE hard drive with the label facing up into the Dia\
mond
enclosure. Push the hard drive towards the back end to secure the drive\
connectors onto the Diamond enclosure’s IDE connector.
Step 4
Turn the Diamond enclosure over with the hard drive mounting holes facing\
up. Use
the included flat head screws to secure the hard drive onto the...")
