Addonics Technologies NAS Adapter NAS4RM User Manual

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Step 2 configures the NAS units static IP address and subnet mask. To choose a 
working static IP address, make sure you meet these criteria:
1. The subnet mask must match the rest of the network exactly.
2. The IP address must match the routers IP address exactly where the subnet 
     mask is 255.
3. The IP address cannot end in 0 or 255.
4. The IP address must not match any other...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
When the wizard is complete by either choosing Automatic in Step 1 or completing
Steps 2 and 3, a confirmation page will appear. Clicking the Finish button will apply
the settings.
View Drive Information
Displays details of all connected drives. If network shares are configur\
ed for
drives that have been disconnected, those drives will also appear in thi\
s list as
unavailable....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
When the wizard is complete by either choosing Automatic in Step 1 or completing
Steps 2 and 3, a confirmation page will appear. Clicking the Finish button will apply
the settings.
View Drive Information
Displays details of all connected drives. If network shares are configur\
ed for
drives that have been disconnected, those drives will also appear in thi\
s list as
unavailable....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
When the wizard is complete by either choosing Automatic in Step 1 or completing
Steps 2 and 3, a confirmation page will appear. Clicking the Finish button will apply
the settings.
View Drive Information
Displays details of all connected drives. If network shares are configur\
ed for
drives that have been disconnected, those drives will also appear in thi\
s list as
unavailable....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Step 1 is to define the name of the share. The share name will become the folder
name on the drive.
NOTE: The shared folder name will be written to disk using all capital letters\
. If an existing folder of the same 
name appears and is not all capital letters, the NAS considers that not \
a match and writes the same folder 
name in all capital letters anyway. This can cause...

www.addonics.com
Phone:   408-573-8580
Fax:     408-573-8588
Email:   http://www.addonics.com/sales/query/
CONTACT US
Step 3 is to set the initial permissions for the new share. A permission setting for
“Everyone” as well as each individual user is listed, with the def\
ault permission set to
None for both SMB and FTP. Once you have reviewed the permissions for all users 
and made any desired changes, clicking on “Create Share Folder” wi\
ll complete the 
Wizard.
Rename A Shared Folder
Changes the name...