Quick Install 
 
In order to start sharing storage as soon as possible, follow these steps: 
 
1. Attach the NAS 4.0 unit to a network with a DHCP server present (most home routers 
provide this by default).  
 
2. All of the NAS 4.0 units functions and features are configured using a Web Interface. 
The default administrator user name is ‘admin’ and password is ‘123456’. To access this 
Web interface: 
 
Windows PC:  
a) Run the Search utility NasFindAddonics.exe from the included CD. Click the 
SCAN...
                                            

                                                    www.addonics.com
NAS 4.0 Adapter
(NAS40ESU)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Firmware v98a.5 
                                            

                                                    www.addonics.com
NAS 4.0 Adapter
(NAS40ESU)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Firmware v98a.5 
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have 
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
Internal GigaNASAdapter
(NAS4RM)
User Guide         
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v4.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
NAS Adapter
(NASU2)                 
                                            

                                                    T E C H N O L O G I E S
User Guide
Mini  Storage Tower
(NA3MS4HU2B / NASMS4HPMB)
1.  Set the Rotary switch to the RAID mode required.
2.  Push the RAID setting button with a ballpoint pen while the tower is    
  turned off.
Note: Do not use paper clip or sharp 
object. Use a ballpoint pen to press the 
raid setting button.
3.  While holding the RAID setting 
button, turn on the tower and continue 
to hold for at least 5 seconds.
Note:   The LEDs for SATA and USB will blink while pressing on the raid...
                                            

                                                    T E C H N O L O G I E S
User Guide
Mini  Storage Tower
(NA3MS4HU2B / NASMS4HPMB)
Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v6.1.11
www.addonics.com         
                                            

                                                     
ADDONICS TECHNOLOGIES 
Model: ADU2N1G 
 For more detailed information on setting up the NAU (Network Attached USB) adapter, refer to the User Manual located on the CD that came with the device.       
 
 
 
 
 
 
  I. Hardware Installation 1. Plug in the Ethernet wire into the RJ-45 socket of the NAU adapter and the other end of the wire to a router or a switch. 2. Connect the DC-Jack with the bundled power adapter. Green LED will light up. If an active Ethernet line is detected, the yellow LED will...