Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v8.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
1:5 CF or CFAST Duplicator(CFASTD5 / CFD5)
ENT
ESC         
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v5.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
1:10 CF or CFAST Duplicator PRO
(CFASTD10-2S / CFD10-2S)
ENT
ESC
CFCFAST         
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
www.addonics.com
User Guide
1:4 CF or CFAST Duplicator PRO
(CFASTD4-2S / CFD4-2S)
ENT
ESC
CFCFAST
T E C H N O L O G I E S         
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
1:5 CF or CFAST Duplicator
(CFASTD5 / CFD5)
ENT
ESC         
                                            

                                                     
ADDONICS TECHNOLOGIES 
Model: UFMDU 
 
Note:  Make sure that the capacity of the target card is equal or 
larger than the source card.  
 
For example, on the label of the card, it might identify both cards 
as 8GB but the actual size differs. When these type of cards are 
used on the Universal Flash Media duplicator, when you start 
duplicating, you will receive a “Target Not Ready” error.  To 
resolve this issue, you need to decrease the card size of the 
source card. To do this, navigate to: 6.Setup...