Home > Addonics Technologies > NAS (Network Attached Storage) > Addonics Technologies NAS Adapter NAS40ESUv98a User Manual

Addonics Technologies NAS Adapter NAS40ESUv98a User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies NAS Adapter NAS40ESUv98a User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 www.addonics.com NAS 4.0 Adapter (NAS40ESU) Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ Firmware v98a.5
    Page 2 Overview Storage Ports: eSATA (3.0Gbps) or USB (2.0). Each port supports one eSATA device and one or more USB based devices, up to 16 physical drives. Network Port: Supports 10/100/1000. Power LED: glows when unit is on. Status LED: glows steady when unit is idle, other states are dark or dim to indicate a problem, slow or fast blinking between dark and bright or dim and bright to indicate the unit is busy. 1www.addonics.com Technical Support (M-F 8:30 am – 6:00 pm) Storage PortsPower LED Status LEDPower...
    Page 3 Installation Network Connection The NAS unit is factory configured for dynamic IP addressing (DHCP client). Connect the unit to a network (router or switch) where DHCP is supported. Static IP may be assigned later after initial setup. Storage The NAS unit does not support FIS switching for port multipliers, therefore any eSATA devices must be a single drive or a RAID array. Also, through the use of USB hubs, up to a total of 16 physical storage devices may be connected, also counting any...
    Page 4 Connecting to the NAS Unit All of the NAS units functions and features are configured using a Web Interface. Once the hardware is installed, access the Web Interface with a web browser on a computer attached to the same network by typing in “http://addnas” - this will work on most Windows systems. Be sure the computer accessing the NAS unit has the Workgroup name set to WORKGROUP. Operating systems other than Windows may need to access the web interface by typing in the NAS units...
    Start reading Addonics Technologies NAS Adapter NAS40ESUv98a User Manual

    Related Manuals for Addonics Technologies NAS Adapter NAS40ESUv98a User Manual

    All Addonics Technologies manuals