ADDER ePower Switch 8 Master Manual

 
3.3.8.3. S
 
Up to 32 t
to the eP
o
 
Only 16 
t
monitor te
digital inp
 
You can c
already c
o
 
To conne
c
 
1. Set th
e
sensor 
    - Do N
O
    - Do NO
 
2. Using 
ePowe
 
To config
 
1. Open 
y
(ex. htt
 
2. Enter t
h
 
3. Click o
n
 
 
Settings / P
emperature, 
owerSwitch 8
temperature
emperature
put like the D
onnect a sen
onnected to t
ct a sensor 
e dip switche
already insta
OT connect t
OT use the s
a standard 
rSwitch*8X
M
ure the sens
you browser 
p://192.168.
1
he administra
n the Setting...

31  If the sen
displayed 
and Info s
y
The Perip
periphera
Explorer o
 
Problem 
/
y If you 
8XM, 
will b
e
setting
conne
y The 
P
TAB a
Firefox
 
4. To co
n
Periphe
temper
 
 
 
sor is prope
on this page
ymbol is red.
pheral page
al TAB agai
or Mozilla F
/ Troublesho
choose any
a conflict oc
e changed to
gs to solve t
cted sensors
Peripheral pag
again (or pus
x). 
nfigure or m
erals page. A
rature and hu
erly connecte
e after a dela
. 
e is not aut
n (or push
irefox). 
ooting 
y setting tha
curs and th...

   
Sensor I
D
The ePow
• T  
f
• TH f
• TA f
 
Sensor N
a
In this fiel
character
s
 
Analog In
Name: 
In this fiel
d
Unit: 
In this fiel
d
Graph: 
Check thi
s
Period (m
In this field
 
LOGOUT
:
Click Logo
DISCARD
Click Dis
c
APPLY CH
Click App
 
D: 
erSwitch 8X
followed by a
followed by a
followed by a
ame: 
d, enter th
e
s long, and ca
puts 
d enter the na
d enter the u
s box if you w
minutes): 
d enter the pe
: 
out at the bo
 CHANGES
card Change
HANGES: 
ply Changes
M automatic
a number bet
a number...

33 
3.3.8.4. Settings / Peripherals - Digital Inputs  
 
Up to 16 x Digital Input Modules, Push Buttons or Temperature and Proximity sensors can be attached to 
the ePowerSwitch 8XM to monitor environmental conditions.  
 
You can connect them the RJ45 connector on the ePowerSwitch 8XM or behind an xBus peripheral 
already connected to the ePowerSwitch 8XM (Daisy Chain Connection). 
 
An I/O Extension Module is also available to connect 8 dry contact inputs and 4 relay outputs to 
the ePowerSwitch 8XM...

   
Problem 
/
y If you 
ePow
e
conne
Digita
l
addres
on the
y The P
TAB a
Firefox
 
To config
u
Peripheral
A new pag
 
 
ID: 
The ePo
w
Module. 
• DIM 
f
• PW f
• DI  f
 
 
 
/ Troublesho
choose any
erSwitch 8XM
cted Digital 
l Input Mod
ss conflict an
e Peripherals
Peripheral pag
again (or pus
x). 
ure or modify
s page. 
ge appears, a
werSwitch 8X
followed by a
followed by “A
followed by a
ooting 
y setting tha
XM, a conflic
Input Modul
e
ule, remove
nd reconnect
s page and th
ge is not aut
sh [F5] or...

35  Name: 
In this field, enter the name you want to give to the Digital Input Module. The name can be from 1 to 32 
characters long, and can contain alphanumeric characters. 
 
Power Supplies: 
In this field, enter the name you want to give to the two power supplies “PWA” and “PWB”. The name can 
be from 1 to 32 characters long, and can contain alphanumeric characters. 
 
Digital Inputs 
Name: 
In this fields, enter the name you want to give to each Digital Input. The name can be from 1 to 32...

 
36 3.3.8.4.2. Temperature and proximity sensors 
 
 
 
Up to 16 temperature and proximity sensors can be attached to the ePowerSwitch*8XM to monitor 
temperature change and detect presence of a target 
 
The IR proximity sensor acts as a digital input like the Digital Input Module or the Push Button.  
 
You can connect a sensor to the RJ45 connector on the ePowerSwitch 8XM or behind an xBus peripheral 
already connected to the ePowerSwitch 8XM (Daisy Chain Connection). 
 
To connect a sensor to the...

 
37  To config
u
page. A n
sensors. 
 
 
Sensor I
D
The ePow
• TP foll
o
 
The ePo
w
 
Sensor N
a
In this fiel
character
s
 
Analog In
Name: 
In this fiel
d
Unit: 
In this fiel
d
Graph: 
Check thi
s
Period (m
In this field
 
Digital In
p
Name: 
In this fiel
d
 
LOGOUT
:
Click Logo
DISCARD
Click Dis
c
APPLY CH
Click App
 
ure or modify
ew page ap
D: 
erSwitch 8X
owed by a nu
werSwitch 8X
ame: 
d, enter th
e
s long, and ca
puts 
d enter the na
d enter the u
s box if you w
minutes): 
d enter the pe
puts 
d...

 
38 3.3.8.4.3. Push Button  
 
 
 
Up to 16 Push buttons can be attached to the ePowerSwitch 8XM to trigger manually pre-programmed 
actions.  
 
You can connect a Push Button to the RJ45 connector on the ePowerSwitch*8XM or behind an xBus 
peripheral already connected to the ePowerSwitch 8XM (Daisy Chain Connection). 
 
To connect a Push button to the ePowerSwitch 8XM, use following procedure:
 
 
1.  Set the dip switches of the Push button so that the selected I/O address does not conflict with...

39  To config
u
Peripheral
Buttons. 
 
 
ID: 
The ePow
• PB  
f
• SP1 i
• LP2 i
 
Name: 
In this fiel
d
characters
 
Digital In
p
Name: 
In these fi
e
 
LOGOUT
:
Click Logo
DISCARD
Click Dis
c
APPLY CH
Click App
 
ure or modif
s page. A n
erSwitch 8X
followed by a
dentifies eac
dentifies eac
d, enter the n
s long, and ca
puts 
elds enter the
: 
out at the bo
 CHANGES
card Change
HANGES: 
ply Changes
fy the setting
new page ap
M automatic
a number bet
ch Short Pus
ch Long Pus
name you wa
an contain a
e...