Acer Travelmate 6293 Service Guide

Chapter 233
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices 
includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.
Phoenix TrustedCore Setup Utility 
   Information      Main       Advanced       Security       Boot       Exit 
  Item specific Help 
  Boot prioroty order :   
  1: IDE0 : WDC WD200EB –(PM)  
  2: IDE1: WDC WD200EB –(PM    
 3: CD/DVD    
 4: Network boot  
 5. USB HDD  
 6. USB...

34Chapter 2
Exit
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.
The table below describes the parameters in this screen.
ParameterDescription
Exit Saving Changes Exit System Setup and save your changes to CMOS.
Exit Discarding 
ChangesExit utility without saving setup data to CMOS.
Load Setup Default Load default values for all SETUP item.
Discard Changes Load previous values from CMOS for all SETUP items.
Save Changes Save Setup Data to CMOS....

Chapter 235
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
‰New versions of system programs
‰New features or options
‰Restore a BIOS when it becomes corrupted. 
Use the Phlash utility to update the system BIOS flash ROM.
NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery 
Diskette before you use the Phlash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.
NOTE: Please...

36Chapter 2
HDD unlock Utility
This section provide you with removing HDD password method.
Remove HDD Password
If you key in wrong HDD password for three time, “HDD password error code” would display on the screen. 
See the image below.
If you need to solve HDD password locked problem, you can run unlock6.EXE
1.Key in “unlock6 error code 205”
2.Select “2”
3.Choose one HDD password
Reboot system and key in “R6PI11X” or “MI8N4KK” to HDD user password.
Then the HDD password will be unlocked and will auto...

Chapter 237
BIOS Flash SOP under DOS Mode
1.USB Floppy into DOS Mode.
2.Dos mode run: phlash16 xxx.rom
3.Restart System.
BIOS update SOP
1.Go to SWinFlashn\Applicaion\Properties\Compatibility.
2.Select\Compatibility\Privilege Level\Run this program as an administrator. 

38Chapter 2
3.Execute SWin-Flash Application.
4.Select new BIOS update.
5.Run Flash BIOS.. 

Chapter 239
6.SWinFlash BIOS is select ok.
7.SWin-Flash program is running.
v  Load new BIOS.
v  Analyze old and new BIOS.
v  Compatibility.
v  Read old BIOS.
v  Save old BIOS to Backup file.
v  Flash new BIOS.
System BIOS was success update.
8.System will be shut down.
NOTE: 1. Please input AC adapter when flash BIOS.
2. Close all application when flash BIOS. 

40Chapter 2
Crisis disk creation
1.UnZIP the CRISDISK file.
2.Download a new BIOS, rename the BIOS to “BIOS.WPH”.
3.Open the CRISDISK file, run the “WINCRIS”.
4.Press “Start”. 

Chapter 241
5.Press “確定”.
6.Press “Start”
7.Press “確定”.
8.Wait the disk format complete. 

42Chapter 2
9.Press “確定”.
10.Press “關閉”
11 .Wait for the system to create the disk.
12.Press “確定” when its completed.