Acer Travelmate 6293 Service Guide

							Chapter 233
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices 
includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.
Phoenix TrustedCore Setup Utility 
   Information      Main       Advanced       Security       Boot       Exit 
  Item specific Help 
  Boot prioroty order :   
  1: IDE0 : WDC WD200EB –(PM)  
  2: IDE1: WDC WD200EB –(PM    
 3: CD/DVD    
 4: Network boot  
 5. USB HDD  
 6. USB FDD  
7. USB Key  
8. USB CD/DVD ROM  
  
Use  or  to select a device, 
then press  to move it up the 
List, or  to move it down the 
list. Press  to escape the 
menu 
F1  Help     ↑↓ Select Item    F5/F6 Change Values     F9  Setup defaults 
Esc  Exit    ←→ Select Menu  Enter Select4Sub-Menu  F10  Save and Exit 
  
						

							34Chapter 2
Exit
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.
The table below describes the parameters in this screen.
ParameterDescription
Exit Saving Changes Exit System Setup and save your changes to CMOS.
Exit Discarding 
ChangesExit utility without saving setup data to CMOS.
Load Setup Default Load default values for all SETUP item.
Discard Changes Load previous values from CMOS for all SETUP items.
Save Changes Save Setup Data to CMOS.
Phoenix TrustedCore Setup Utility 
  Information       Main       Advanced       Security       Boot        Exit 
  Item specific Help 
Exit Saving Changes      Exit System Setup and save your 
changes to CMOS 
Exit Discarding Changes  Exit utility without saving Setup 
data to CMOS. 
Load Setup Defaults  Load default values for all SETUP 
item. 
Discard changes   
Save changes   
   
   
F1  Help     ↑↓ Select Item    F5/F6 Change Values     F9  Setup defaults 
Esc  Exit    ←→ Select Menu  Enter Select4Sub-Menu  F10  Save and Exit  
						

							Chapter 235
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
‰New versions of system programs
‰New features or options
‰Restore a BIOS when it becomes corrupted. 
Use the Phlash utility to update the system BIOS flash ROM.
NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery 
Diskette before you use the Phlash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.
NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not 
contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not 
completely loaded. 
Fellow the steps below to run the Phlash.
1.Prepare a bootable diskette.
2.Copy the flash utilities to the bootable diskette.
3.Then boot the system from the bootable diskette. The flash utility has auto-execution function. 
						

							36Chapter 2
HDD unlock Utility
This section provide you with removing HDD password method.
Remove HDD Password
If you key in wrong HDD password for three time, “HDD password error code” would display on the screen. 
See the image below.
If you need to solve HDD password locked problem, you can run unlock6.EXE
1.Key in “unlock6 error code 205”
2.Select “2”
3.Choose one HDD password
Reboot system and key in “R6PI11X” or “MI8N4KK” to HDD user password.
Then the HDD password will be unlocked and will auto into Windows after reboot. 
						

							Chapter 237
BIOS Flash SOP under DOS Mode
1.USB Floppy into DOS Mode.
2.Dos mode run: phlash16 xxx.rom
3.Restart System.
BIOS update SOP
1.Go to SWinFlashn\Applicaion\Properties\Compatibility.
2.Select\Compatibility\Privilege Level\Run this program as an administrator. 
						

							38Chapter 2
3.Execute SWin-Flash Application.
4.Select new BIOS update.
5.Run Flash BIOS.. 
						

							Chapter 239
6.SWinFlash BIOS is select ok.
7.SWin-Flash program is running.
v  Load new BIOS.
v  Analyze old and new BIOS.
v  Compatibility.
v  Read old BIOS.
v  Save old BIOS to Backup file.
v  Flash new BIOS.
System BIOS was success update.
8.System will be shut down.
NOTE: 1. Please input AC adapter when flash BIOS.
2. Close all application when flash BIOS. 
						

							40Chapter 2
Crisis disk creation
1.UnZIP the CRISDISK file.
2.Download a new BIOS, rename the BIOS to “BIOS.WPH”.
3.Open the CRISDISK file, run the “WINCRIS”.
4.Press “Start”. 
						

							Chapter 241
5.Press “確定”.
6.Press “Start”
7.Press “確定”.
8.Wait the disk format complete. 
						

							42Chapter 2
9.Press “確定”.
10.Press “關閉”
11 .Wait for the system to create the disk.
12.Press “確定” when its completed.