Acer Travelmate 4330 Service Guide
Have a look at the manual Acer Travelmate 4330 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3111 Replacing the Mainboard 1.Replace the USB cable under the mainboard as shown.2.Replace the power jack in the Lower Cover and secure by pressing the cable in the housing well. 3.Replace the Bluetooth connector as shown.4.Ensure that the Mainboard is face up. Place the Mainboard in the chassis, rear edge first, and press down to install. 5. Ensure the screw sockets are aligned. Replace the two securing screws as shown. NOTE: Make sure the I/O ports are positioned correctly through the lower cover, and the screw sockets are visible through the mainboard.
11 2Chapter 3 Replacing the Modem Module Replacing the USB Board 1.Replace the USB board on the lower base and secure with the single screw (provided). 1.Align the screw sockets and replace the modem module and insert the module in mainboard.2.Replace the two securing screws. 3.Connect the modem cable as shown .
Chapter 311 3 2.With the mainboard removed from the lower base, replace the USB cable. Replacing the Bluetooth Board 1.Position the module over the aligning pins and insert in place.2.Replace the bluetooth cable as shown. 3.Replace the adhesive strip to secure the cable.
11 4Chapter 3 Replacing the Right Speaker Module 1.Replace the speaker module on the lower cover as shown. 2.Replace the two securing screws.
Chapter 311 5 Replacing the Launch Board 1.Insert the left edge of the Launch Board into place and pivot the board to replace in the lower base.2.Replace the two securing screws . 3.Connect the launch board cable to the mainboard.
11 6Chapter 3 Replacing the Finger Print Reader Replacing the Touch Pad Bracket 1.Replace the Finger Print Reader board in the upper cover. 2.Replace the bracket as shown.3.Replace the single securing screw. IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. 1.Replace the Touch Pad bracket.2.Replace the single securing screws on the Touch Pad bracket.
Chapter 311 7 Replacing the Left Speaker Module 3.Replace the adhesive strip over the Touch Pad.4.Replace the Touch Pad FFC as shown. 1.Align and replace the Speaker Module in the upper case.2.Replace the two securing screws as shown. 3.Replace the adhesive strip to secure the cable in place.
11 8Chapter 3 Replacing the Upper Cover 1.Starting with the rear, align the upper cover with the lower cover, taking care to not force in place. 2.Connect the seven cables on the mainboard as shown. BC D E F GA
Chapter 311 9 3.Replace the single securing screw on the top panel. 4.Turn the computer over. Replace the sixteen screws on the bottom panel. Replacing the LCD Module 1.Carefully align the LCD module over the hinge sockets and lower the module into the chassis.
120Chapter 3 2.Replace the four securing screws (two on each side) securing the LCD module. 3.Connect the LCD, MIC and back light cables.