Acer Travelmate 4330 Service Guide
Have a look at the manual Acer Travelmate 4330 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 391 4.Lift the Thermal Module clear of the Mainboard.
92Chapter 3 Removing the CPU 1.See “Removing the Thermal Module” on page 90. 2.Using a flat screwdriver, turn the CPU socket latch counter-clockwise 180° to release the CPU. 3.Lift the CPU clear of the Mainboard.
Chapter 393 Removing the VGA Module 1.See “Removing the Mainboard” on page 85. 2.Remove the two securing screws from the VGA Module. 3.The VGA module lifts automatically from the mainboard. Remove the VGA Module as shown. StepSizeQuantityScrew Type VGA Module M2*5 (NL) 2
94Chapter 3 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List StepScrewQuantityPart No. LCD Bezel M2.5*5 (NL) 4 86.TQ602.002 Inverter Board M2.5*5 (NL) 2 86.TQ602.002 Camera Module M2*3 (NL) 2 86.TQ602.005 Camera Board M2*2.3 (NL) 1 86.TQ602.004 LCD Brackets M2*3 (NL) 8 86.TQ602.005
Chapter 395 Removing the LCD Bezel 1.See “Removing the LCD Module” on page 70. 2.Remove the two upper and two lower bezel screw caps. Remove the four securing screws from the LCD module. 3. Lift up the bezel, topside first, and remove it from the LCD Module. StepSizeQuantityScrew Type LCD Bezel M2.5*5 (NL) 4
96Chapter 3 Removing the Inverter Board 1.See “Removing the LCD Bezel” on page 95. 2.Remove the securing tapes from the left and right sides of the Inverter board as shown. 3. Remove the two securing screws from the Inverter board and lift the board clear of the LCD Module. 4.Remove the Inverter Board from the LCD Module. StepSizeQuantityScrew Type Inverter Board M2.5*5 (NL) 2
Chapter 397 Removing the Camera Module 1.See “Removing the LCD Bezel” on page 95. 2.Disconnect the Camera Module cable as shown. 3.Remove the two securing screws from the Camera Module bracket. StepSizeQuantityScrew Type Camera Module bracketM2*3 (NL) 2
98Chapter 3 4.Lift the Camera Bracket with the Camera Module (A) and remove the single securing screw (B). 5.Place your finger on the top of the module and pry it away from the bracket. 6.Completely separate the camera board from the bracket. StepSizeQuantityScrew Type Camera Board M2*2.3 1 A B
Chapter 399 Removing the LCD Panel 1.See “Removing the LCD Bezel” on page 95. 2.Lift the LCD Panel clear of the LCD Module, taking care to ensure the cables are free from the back cover.
100Chapter 3 Removing the LCD Brackets and FPC Cable 1.See “Removing the LCD Panel” on page 99. 2.Turn the LCD panel over to expose the rear. Peel off the mylar strip and remove the FPC cable. 3.Grip the FPC cable and lift upward to detach the adhesive pads. 4.Remove the eight securing screws (four on each side) from the LCD Panel brackets. 5.Remove the LCD brackets by pulling them away from the LCD Panel. StepSizeQuantityScrew Type LCD Brackets M2*3 NL 8