Acer Aspire 8935G User Manual
Have a look at the manual Acer Aspire 8935G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 371 Main Unit Disassembly Process Upper Cover Disassembly Flowchart Screw List StepScrewQuantityPart No. Switch Cover M2.5*6.5 9 86.ARE07.001 M2.5*4 4 86.D01V7.001 Power Board M2.5*4 3 86.D01V7.001 LCD Module M2.5*6.5 4 86.ARE07.001 Upper Cover M2.5*6.5 9 86.ARE07.001 M2.5*4 5 86.D01V7.001 M2*3 1 86.S0207.001 Rem ove Switch Cover Rem ove LCD Module Rem ove Media Board Remove External Modules before proceeding Upper Cover Rem ove Launch BoardRem ove Volume Control BoardRem ove Finger Print Reader Bracket Lower Cover (see page 99) Rem ove Keyboard Rem ove Upper Cover Rem ove Power Board Rem ove Power Saving Board FFCRem ove TouchPad Lock Board Rem ove Finger Print Reader
72Chapter 3 Lower Cover Disassembly Flowchart Screw List StepScrewQuantityPart No. Bluetooth Board M2*3 1 86.S0207.001 USB Board M2.5*4 1 86.D01V7.001 Power Saving Board M2.5*4 1 86.D01V7.001 Mainboard M2.5*4 3 86.D01V7.001 Kensington Lock BracketM2*3 1 86.S0207.001 Subwoofer 4 Hinge Supports M2.5*4 6 86.D01V7.001 Speaker Module 6 Graphics Card HeatsinkM2.5*6.5 2 86.ARE07.001 Graphics Card M2.5*6.5 1 86.ARE07.001 Rem ove Graphics Card Rem ove Mainboard Rem ove USB Board Rem ove Upper Cover Remove External Modules before proceeding Rem ove Bluetooth Module Rem ove CPU Rem ove Thermal Module Rem ove Power Saving Board Rem ove Subwoofer Rem ove Hinge Supports Rem ove RTC Battery Rem ove Kensington Lock Bracket Rem ove TV Tu ner AntennaRem ove Speaker Module Rem ove Graphics Card Heatsink
Chapter 373 Removing the Keyboard 1.See “Removing the Battery Pack” on page 56. 2.Press the six securing clips inward to release the Keyboard from the Upper Cover. 3.Lift the centre of Keyboard up as shown. IMPORTANT: Do not remove the Keyboard from the computer; the Keyboard FFCs are still connected. 4.Turn the Keyboard over and place it on the TouchPad area to expose the FFC cables.
74Chapter 3 5.Disconnect the Backlight cable by opening the FFC latch and removing the cable from the Mainboard. 6.Disconnect the Keyboard cable by opening the FFC latch and removing the cable from the Mainboard. 7.Remove the Keyboard from the Upper Cover.
Chapter 375 Removing the Switch Cover 1.See “Removing the Battery Pack” on page 56. 2.Turn the computer over. Remove the thirteen screws securing the Switch Cover to the Upper Cover. IMPORTANT: Do not lift the Switch Cover away from the computer; the Power Board FFC is still connected. 3.Turn the computer over and open the LCD Panel. Lift the Switch Cover, rear edge first, as shown. StepSizeQuantityScrew Type Switch Cover (red callout)M2.5*6.5 9 Switch Cover (green callout)M2.5*4 4
76Chapter 3 4.Turn the Switch Cover over and place it face down on the Keyboard. 5.Open the Power Board FFC locking latch and disconnect the FFC from the Mainboard. 6.Remove the Switch Cover from the Upper Cover.
Chapter 377 Removing the Power Board 1.See “Removing the Switch Cover” on page 75. 2.Open the Power Board FFC locking latch and disconnect the FFC from the Power Board. 3.Remove the three screws securing the Power Board to the Switch Cover. 4.Lift the Power Board away from the Switch Cover right side first to release the securing clip. StepSizeQuantityScrew Type Power Board M2.5*4 3
78Chapter 3 Removing the LCD Module 1.See “Removing the Switch Cover” on page 75. 2.Turn the computer over and ensure that the Antenna cables are free from obstructions. 3.Pull the Antenna cables through the Upper Cover as shown. Ensure that the Antennas are completely free from the cover. 4.Remove the Antenna from the cable channel all the way to the Hinge Well. Ensure that the cables are free from all cable clips.
Chapter 379 5.Grasp the pull tab and lift upward as shown to disconnect the LVDS cable. 6.Remove the LVDS cable from the cable channel all the way to the Hinge Well. Ensure that the cable is free from all cable clips. 7.Disconnect the MIcrophone cable from the Mainboard.
80Chapter 3 8.Remove the Microphone cable from the cable channel all the way to the Hinge Well. Ensure that the cable is free from all cable clips. 9.Remove the four screws securing the LCD Module to the Lower Cover. 10.Using both hands, lift the LCD Module clear of the Lower Cover. StepSizeQuantityScrew Type LCD Module M2.5*6.5 4