Acer Aspire 8935G User Manual
Have a look at the manual Acer Aspire 8935G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 381 Removing the Upper Cover IMPORTANT: The TouchPad is supplied as part of the Upper Cover. If the TouchPad is defective, replace the entire Upper Cover. 1.See “Removing the LCD Module” on page 78. 2.Turn the computer over. Remove the fifteen screws on the bottom panel. 3.Disconnect the indicated FFCs (A, B, C, D, and E) from the Mainboard. NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFC cables whenever available to prevent damage. StepSizeQuantityScrew Type Upper Cover (red callout)M2.5*6.5 9 Upper Cover (green callout)M2.5*4 5 Upper Cover (blue callout)M2*3 1 A B C D E
82Chapter 3 4.Open the locking latch on A and disconnect the FFC from the Mainboard. 5.Open the locking latch on B and disconnect the FFC from the Mainboard. 6.Open the locking latch on C and disconnect the FFC from the Mainboard.
Chapter 383 7.Open the locking latch on D and disconnect the FFC from the Mainboard. 8.Open the locking latch on E and disconnect the FFC from the Mainboard. 9.Remove the eleven screws securing the Upper Cover to the Lower Cover. StepSizeQuantityScrew Type Upper Cover (red callout)M2.5*4 10
84Chapter 3 10.Remove the Upper Cover as shown.Upper Cover (green callout)M2*3 1 StepSizeQuantityScrew Type
Chapter 385 Removing the Launch Board 1.See “Removing the Upper Cover” on page 81. 2.Turn the Upper Cover over. Open the locking latch on the FFC and disconnect it from the Launch Board. 3.Remove the Launch Board from the Upper Cover
86Chapter 3 Removing the Volume Control Board 1.See “Removing the Upper Cover” on page 81. 2.Open the locking latch on the FFC and disconnect it from the Media Board. 3.Open the locking latch on the FFC and disconnect it from the Volume Control Board. 4.Remove the two screws securing the board to the Upper Cover. StepSizeQuantityScrew Type Volume Control BoardM2*3 2
Chapter 387 5.Lift the board clear of the Upper Cover.
88Chapter 3 Removing the Power Saving Board FFC 1.See “Removing the Upper Cover” on page 81. 2.Lift the protective covering and FFC away from the Upper Cover to detach the adhesive. 3.Continue lifting the FFC away from the Upper Cover as shown. 4.Remove the FFC from the Upper Cover.
Chapter 389 Removing the Media Board 1.See “Removing the Upper Cover” on page 81. 2.Open the locking latch on the FFC and disconnect it from the Media Board. 3.Remove the FFC from the Upper Cover by peeling back the adhesive as shown. 4.Carefully pry up the edge of the Media Board as shown. NOTE: The Media Board is secured in place with strong adhesive; ensure that the board is not deformed during removal.
90Chapter 3 5.Lift the Media Board clear of the Upper Cover.