Acer Aspire 8935G User Manual
Have a look at the manual Acer Aspire 8935G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3151 Replacing the Thermal Module IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module. The following thermal grease types are approved for use: •Silmore GP50 •Honeywell PCM45F-SP •ShinEtsu 7762 The following thermal pads are approved for use: • Eapus XR-PE 1.Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2.Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease manually, the force used during the installation of the Thermal Module is sufficient. 3.Align the screw holes on the Thermal Module and Mainboard then replace the module. Keep the module as level as possible to spread the thermal grease evenly.Replace the single Fan screw and the four Thermal Module screws (in numerical order from screw 1 to screw 6) to secure the Thermal Module in place. 4.Connect the fan cable to the Mainboard. 1 2 3 4 56
152Chapter 3 Replacing the Speaker Module 1.Using both hands, insert the Speaker Module into the Lower Cover as shown. 2.Replace the six screws to secure the Speaker Module in place. NOTE: The screws securing the Speaker Module in place are cushioned by rubber washers. Ensure that the washers are replaced before replacing the screws. StepSizeQuantityScrew Type Speaker Module 6
Chapter 3153 Replacing the Hinge Supports 1.Insert the left and right Hinge Supports into the Lower Cover as shown. 2.Insert the six screws (three each side) to secure the Hinge Supports to the Lower Cover. StepSizeQuantityScrew Type Hinge Supports M2.5*4 6
154Chapter 3 Replacing the Subwoofer IMPORTANT: Avoid contact with the speakers when inserting or removing the subwoofers. Contact with the subwoofers may result in damage. 1.Using both hands, insert the Subwoofer into the Lower Cover as shown. 2.Insert the four screws to secure the Subwoofer to the Lower Cover. NOTE: The screws securing the Subwoofer in place are cushioned by rubber washers. Ensure that the washers are replaced before replacing the screws. StepSizeQuantityScrew Type Subwoofer 4
Chapter 3155 3.Insert the Subwoofer cable into the cable channel. Ensure that the cable passes under all cable clips.
156Chapter 3 Removing the TV Tuner Antenna 1.Insert the TV Tuner Antenna into the Lower Cover, making sure the cable passes through the slot in the wall of the well. 2.Push the Antenna cable through the casing as shown. 3.Remove the Antenna cable from the cable channel as shown. Ensure that the cable is free from all cable clips.
Chapter 3157 Removing the Kensington Lock Bracket 1.Insert the bracket into the Lower Cover. NOTE: The TV Tuner Antenna located under the bracket may lift away with the bracket. 2.Insert the single screw to secure the Kensington Lock Bracket into the Lower Cover. Replacing the Mainboard StepSizeQuantityScrew Type Kensington Lock BracketM2*3 1
158Chapter 3 Removing the Mainboard 1.Pivot the Mainboard upward and remove it from the chassis, right side first. Place the Mainboard on a clean, dust-free surface. 2.Connect the Speaker and Subwoofer cables to the Mainboard.
Chapter 3159 3.Insert the three screws to secure the Mainboard to the Lower Cover. Replacing the Power Saving Board 1.Insert the board into the chassis as shown. StepSizeQuantityScrew Type Mainboard M2.5*4 3
160Chapter 3 2.Insert the single securing screw into the board. Replacing the USB Board IMPORTANT: The USB FFC is supplied as part of the Lower Cover. If the USB FFC is defective, replace the entire Lower Cover. 1.Insert the USB Board into the Lower Cover as shown. StepSizeQuantityScrew Type Power Saving BoardM2.5*4 1