Acer Aspire 8935G User Manual
Have a look at the manual Acer Aspire 8935G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3141 4.Align the LCD brackets with the screw holes on the panel. Replace the eight screws (four on each side) in the brackets as shown. 5.Align the Camera Board with the locating pins on the LCD Module and place the board as shown. 6.Press down as shown to secure the board in place with adhesive. 7.Place the LCD Panel adjacent to the LCD Module as shown and connect the Camera cable to the Camera Module.
142Chapter 3 8.Flip the LCD Panel over and place it in the LCD Module. IMPORTANT: Ensure that the LCD cable is not trapped under the panel. 9.Run the LVDS and Antenna cables through the hinge wells as shown. 10.Secure the LCD module with nine securing screws.
Chapter 3143 NOTE: The six bracket screws are numbered from 1 to 3 on each bracket. Replace the screws in order from 1 to 3. 1 2 332 1
144Chapter 3 Replacing the LCD Bezel 1.Place the LCD Bezel adjacent to the LCD Module as shown and connect the Microphone cable. 2.Flip the LCD Panel over and place it in the LCD Module.
Chapter 3145 3.Press down around the perimeter of the bezel to secure it in place.
146Chapter 3 Replacing the Flush LCD Bezel Cap 1.Place the Bezel Cap on to the LCD Module as shown. 2.Ensure that the LCD cables pass through the hinge wells as shown and pinch the hinge covers together to secure them in place.
Chapter 3147 3.Press the Bezel Cap down as shown to secure it to the LCD Module. 4.Replace the two screws and screw caps.
148Chapter 3 Main Module Reassembly Procedure Replacing the CPU IMPORTANT: The CPU has a Pin1 locator that must be positioned corresponding to the marker on the CPU socket. 1.Carefully turn the mainboard upside down (CPU side up), and place the CPU into the CPU socket as shown, taking note of the Pin1 locator. 2.Turn the securing screw 180° to secure the CPU in the socket.
Chapter 3149 Replacing the Graphics Card 3.Insert the Graphics Card into the Mainboard connector. 4.Insert the single screw to secure the Graphics Card to the Mainboard. StepSizeQuantityScrew Type Graphics Card M2.5*6.5 1
150Chapter 3 Replacing the Graphics Card Heatsink IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module. The following thermal grease types are approved for use: •Silmore GP50 •Honeywell PCM45F-SP •ShinEtsu 7762 The following thermal pads are approved for use: • Eapus XR-PE 1.Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2.Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease manually, the force used during the installation of the Thermal Module is sufficient. 3.Place the heatsink onto from the Graphics Card as shown. 4.Replace the two screws (in numerical order from 1 to 2) to secure the Graphics Card Heatsink to the Mainboard. StepSizeQuantityScrew Type Graphics Card HeatsinkM2.5*6.5 2 1 2