Acer Aspire 5940g Service Guide
Have a look at the manual Acer Aspire 5940g Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 361 Removing the Keyboard 1.Locate the five securing clips on the top edge of the Keyboard. 2. Starting with the central clip, release all five securing clips by pressing down with a suitable plastic tool. 3. Pry up the centre of the Keyboard as shown.
62Chapter 3 4.Rotate the Keyboard upward away from the Upper Cover and place it face down on the TouchPad area. 5. Open the Keyboard backlight FFC connector and disconnect the FFC. 6. Open the Keyboard FFC connector and disconnect the FFC. 7. Remove the Keyboard from the Upper Cover.
Chapter 363 Removing the Upper Cover 1.See “Removing the Keyboard” on page 61. 2. Turn the computer over. Remove the twenty-three screws on the bottom panel. 3. Turn the computer over. O pen the Launch Board FFC connector and disconnect the FFC. StepSizeQuantityScrew Type Upper Cover (red callout) M2.5*8 18 Upper Cover (blue callout) M2.5*5 2 Upper Cover (green callout) M2.5*3 3
64Chapter 3 4.Remove the single screw securing the Keyboard Cover to the Upper Cover, and remove the Keyboard Cover. 5. Disconnect the following FFCs (A, B, D, and E) and cables (C, F, and G) from the Mainboard. NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFC cables whenever available to prevent damage. StepSizeQuantityScrew Type Keyboard Cover M2.5*5 1 A B CD E F G
Chapter 365 6.Starting on the front left side of the casing and worki ng along toward the right, pry the upper and lower covers apart as shown. 7. Work along the casing on the right and left sides toward the back edge, prying apart the casing. 8. Remove the Upper Cover as shown.
66Chapter 3 Removing the Media Board 1.See “Removing the Upper Cover” on page 63. 2. Turn the Upper Cover over and lift the M edia Board FFC to disconnect the adhesive. 3. Turn the Upper Cover over. Lift the Media Board cover, left side first, and remove the cover from the Upper Cover. 4. Press down the securing latch (1) and push the Media Board in the direction of the arrow (2) to disengage the securing clips. 1 2 Securing Clip
Chapter 367 5.Lift the Media Board away from the Upper Cover (1) a nd feed the FFC through the Upper Cover (2) to remove the Media Board. 1 2
68Chapter 3 Removing the Launch Board 1.See “Removing the Upper Cover” on page 63. 2. Turn the Upper Cover over and lift the Launch Board FFC to disconnect the adhesive. 3. Turn the Upper Cover over. Lift the Launch Board cover, left side first, and remove the cover from the Upper Cover. 4. Press down the securing latch (1) and push the Launch Boar d in the direction of the arrow (2) to disengage the securing clips. 1 2 Securing Clip
Chapter 369 5.Lift the Launch Board away from the Upper Cover. 6. Feed the FFC through the Upper Cover to remove the Launch Board
70Chapter 3 Removing the Speaker Module 1.See “Removing the Upper Cover” on page 63. 2. Lift the mylar covering to expose the Speaker cable as shown. 3. Remove the Speaker cable from the cable channel as shown. 4. Remove the four securing screws from the Speaker module. StepSizeQuantityScrew Type Speaker Module M2.5*3 4