Acer Aspire 5940g Service Guide
Have a look at the manual Acer Aspire 5940g Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 381 Removing the LCD Module IMPORTANT: The LCD Module cannot be disassembled outside of factory conditions. If any part of the LCD Module is faulty, such as the camera, antenna or LCD panel, the whole module must be replaced. 1. See “Removing the Upper Cover” on page 63. 2. Remove the adhesive tapes securing the Antenna cables in place. 3. Pull the Antenna cables through the cover as shown. En sure that the Antennas are completely free from the cover. 4. Disconnect the USB Board cable as shown.
82Chapter 3 5.Remove the USB Board cable from the cable clips as shown. 6. Remove the adhesive tapes securing the USB Board and Backlight cables in place. 7. Disconnect the Backlight and USB Board cables from the Mainboard.
Chapter 383 8.Lift the USB Board cable to detach the adhesive securing it in place. 9. Remove the USB Board and Backlight cables from the ca ble channel. Ensure that the cables are free from all cable clips. 10. Remove the Antenna and Backlight cables from the cable clip as shown.
84Chapter 3 11 .Pass the Antenna and Backlight cables through the space between the Battery Bay and Hinge well as shown. 12. Remove the cables from the final cable clip as shown. 13. Disconnect the Conductive cable from the Mainboard.
Chapter 385 14.Disconnect the LVDS cable from the Mainboard. 15. Remove the Conductive and LVDS cables from the cabl e channel. Ensure that the cables are free from all cable clips. 16. Remove the four screws (two each side) securing the LCD Module to the Lower Cover. StepSizeQuantityScrew Type LCD Module M2.5*5 4
86Chapter 3 17.Using both hands, lift the LCD Module clear of the Lower Cover. IMPORTANT: The LCD Module cannot be disassembled outside of factory conditions. If any part of the LCD Module is faulty, such as the camera, antenna or LCD panel, the whole module must be replaced.
Chapter 387 Removing the Saddles 1.See “Removing the Upper Cover” on page 63. 2. Lift the left side Saddle clear of the Lower Cover as shown. 3. Remove the two screw securing the right side Saddle to the Lower Cover. StepSizeQuantityScrew Type Right Saddle M2.5*5 2
88Chapter 3 4.Lift the right side Saddle clear of the Lower Cover as shown.
Chapter 389 Removing the USB Board 1.See “Removing the Saddles” on page 87. 2. Remove the single screw securing the USB Board to the Lower Cover. 3. Remove the USB Board from the Lower Cover as shown. StepSizeQuantityScrew Type USB Board M2.5*3 1
90Chapter 3 Removing the Subwoofer 1.See “Removing the LCD Module” on page 81. 2. Disconnect the Subwoofer cable from the Mainboard. 3. Remove the cable from the channel. Ensure th at the cable is free from all cable clips. 4. Using both hands, lift the Subwoofer clear of the Lower Cover.