Acer Aspire 5741g Service Guide
Here you can view all the pages of manual Acer Aspire 5741g Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 121
Chapter 3111 Replacing the Card Reader Board 1.Place the card reader board in the device. 2.Secure one (1) screw on the card reader board. 3.Connect the card reader cable and lock the connector.
Page 122
11 2Chapter 3 Replacing the TouchPad Bracket 1.Replace the TouchPad bracket top edge first to engage the securing clips and press down firmly. 2.Replace the one (1) screws to secure the TouchPad Bracket to the Upper Cover. 3.Replace the TouchPad FFC and close the locking latch on the connector.
Page 123
Chapter 311 3 4.Replace the FFC and press down as indicated to secure it to the Upper Cover.
Page 124
11 4Chapter 3 Replacing the Power Board 1.Place the power board in the chassis. Adhere the power board assembly as shown. 2.Secure two (2) screws on the power board. 3.Pass the power board cable through the upper cover. Adhere the power board cable as shown.
Page 125
Chapter 311 5 Replacing the Right Speaker Module 1.Place the right speaker module in the chassis as shown. 2.Run the speaker cable along the channel. 3.Secure the two (2) securing screws on the Right Speaker Module.
Page 126
11 6Chapter 3 Replacing the Left Speaker Module 1. Place the module right side first on the Upper Cover as shown. 2.Run the Speaker cable along the cable channel. 3.Secure two (2) screws from the left speaker module.
Page 127
Chapter 311 7 Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover as shown. 2.Secure the seven (7) screws on the Upper Cover as shown.
Page 128
11 8Chapter 3 3.Connect the following cables to the Mainboard. 4.Connect D as shown.5.Connect C as shown. AB C D
Page 129
Chapter 311 9 6.Connect B as shown.7.Connect A as shown. 8.Turn the computer over. Remove the eleven (11) screws on the lower cover and four (4) screws from the battery bay.
Page 130
120Chapter 3 Replacing the Keyboard 1.Connect the Keyboard FFC to the Mainboard and close the locking latch to secure the cable in place. 2.Replace the Keyboard by first lining up the bottom edge. Press down firmly to lock.