Acer Aspire 5732z Service Guide
Have a look at the manual Acer Aspire 5732z Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 371 Removing the Power Board 1.See “Removing the Upper Cover” on page 67. 2.Locate the Power Board on the Upper Cover as shown. 3.Remove the two (2) screws securing the Power Board to the Upper Cover. 4.Lift the Power Board clear of the Upper Cover as shown. StepSizeQuantityScrew Type Power Board M2*3 2
72Chapter 3 Removing the Left Speaker Module 1.See “Removing the Upper Cover” on page 67. 2.Locate the Left Speaker Module on the Upper Cover as shown. 3.Remove the adhesive tape from the Speaker cable. 4.Remove the Speaker cable from the cable channel. Ensure that the cable is free from all cable clips.
Chapter 373 5.Remove the one (1) securing screw from the Left Speaker Module. 6.Lift the Speaker clear of the Upper Cover, left side first as shown. StepSizeQuantityScrew Type Left Speaker ModuleM2*3 1
74Chapter 3 Removing the Right Speaker Module 1.See “Removing the Upper Cover” on page 67. 2.Locate the Right Speaker Module on the Upper Cover as shown. 3.Turn the Upper Cover over and remove the Right Speaker Module cable from the cable channel. Ensure that the cable is free from all cable clips. 4.Turn the Upper Cover over and pass the cable through the cover as shown.
Chapter 375 5.Remove the one (1) securing screw from the Right Speaker Module. 6.Lift the Speaker clear of the Upper Cover, right side first as shown. StepSizeQuantityScrew Type Right Speaker ModuleM2*3 1
76Chapter 3 Removing the TouchPad Bracket IMPORTANT: The TouchPad Board cannot be removed individually. To replace the TouchPad Board, replace the entire Upper Cover. 1.See “Removing the Upper Cover” on page 67. 2.Lift the FFC to detach the adhesive securing the cable to the Upper Cover. 3.Release the FFC locking latch and disconnect the TouchPad FFC from the cover.
Chapter 377 4.Remove the two (2) screws from TouchPad bracket. 5.Lift the rear edge of the TouchPad bracket first to clear the securing clips and remove it as shown. StepSizeQuantityScrew Type TouchPad Bracket M2*3 2
78Chapter 3 Removing the Mainboard 1.See “Removing the Upper Cover” on page 67. 2.Remove the one (1) securing screw from the Mainboard. 3.Lift the mainboard from the chassis, internal edge first, and place it on a clean, dust-free surface. StepSizeQuantityScrew Type Mainboard M2.5*4 1
Chapter 379 Removing the RTC Battery IMPORTANT:Follow local regulations for disposal of all batteries. The RTC Battery is soldered to the Mainboard. To replace the battery, solder the new battery to the connections shown.
80Chapter 3 Removing the Thermal Module 1.See “Removing the Lower Covers” on page 52. 2.Remove the four securing screws (in reverse numerical order from screw 4 to screw 1) from the Thermal Module. 3.Using both hands, lift the Thermal Module clear of the Mainboard. StepSizeQuantityScrew Type Thermal Module 4 12 3 4