Acer Aspire 5732z Service Guide
Have a look at the manual Acer Aspire 5732z Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 351 Removing the SD Dummy Card 1.Push the SD dummy card all the way in to eject it. 2.Pull it out from the slot.
52Chapter 3 Removing the Lower Covers 1.See “Removing the Battery Pack” on page 50. 2.Remove the three (3) screws securing the Memory and HDD Covers. 3.Remove the HDD cover by the top edge as shown. 4.Carefully open the Memory Cover. StepSizeQuantityScrew Type Lower Covers M2.5*8 3 Memory CoverHDD Cover
Chapter 353 Removing the Optical Drive Module 1.See “Removing the Battery Pack” on page 50. 2.Remove one (1) screw securing the ODD module. 3.Insert a suitable tool into the access slot in the battery bay as shown. Gently lever the ODD module out of the chassis. 4.Pull the optical drive module out from the chassis. StepSizeQuantityScrew Type ODD Module M2.5*8 1
54Chapter 3 5.Remove the two (2) screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. 6.Pull the top edge of the bezel downward and clear of the device. StepSizeQuantityScrew Type ODD Bracket M2*3 2
Chapter 355 Removing the DIMM Modules 1.See “Removing the Lower Covers” on page 52. 2.Push out the release latches on both sides of the DIMM socket to release the DIMM module. 3.Remove the DIMM module. 4.Repeat steps for the second DIMM module if present.
56Chapter 3 Removing the WLAN Module 1.See “Removing the Lower Covers” on page 52. 2.Remove the adhesive tape securing the Antenna cables in place. 3.Disconnect the antenna cables from the WLAN Board. NOTE: Cable placement is Black to the MAIN terminal and White to the AUX terminal.
Chapter 357 4.Move the antenna away and remove the two (2) screws to release the WLAN Board. 5.Detach the WLAN Board from the WLAN socket. NOTE: When reattaching the antennas, ensure the cables are tucked into the chassis to prevent damage. StepSizeQuantityScrew Type WLAN Module M2*3 2
58Chapter 3 Removing the Hard Disk Drive Module 1.See “Removing the Lower Covers” on page 52. 2.Using the pull, slide the HDD Module in the direction of the arrow to disconnect the interface. 3.Lift the HDD Module clear of the HDD bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Chapter 359 4.Remove the four (4) screws (two on each side) securing the hard disk to the carrier. 5.Remove the HDD from the carrier. StepSizeQuantityScrew Type HDD Carrier M3*3 4
60Chapter 3 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List StepScrewQuantityPart No. LCD Module M2.5*8 2 86.N2802.003 LCD Module M2.5*8 4 86.N2802.003 Upper Cover M2.5*8 11 86.N2802.003 Upper Cover M2.5*8 9 86.N2802.003 Power Board M2*3 2 86.N2802.006 Left Speaker Module M2*3 1 86.N2802.006 Right Speaker Module M2*3 1 86.N2802.006 TouchPad Bracket M2*3 2 86.N2802.006 Mainboard M2.5*4 1 86.N2802.001 Thermal Module M1.98*3.0 4 86.N2802.004 CPU Fan M2*3 3 86.N2802.006 Rem ove Mainboard Rem ove Switch CoverRem ove Keyboard Rem ove Upper Cover Rem ove LCD Module Rem ove Power Board Remove External Modules before proceeding Rem ove TouchPad Bracket Upper CoverLower Cover Rem ove Left Speaker Module Rem ove CPU Rem ove RTC BatteryRem ove Thermal Module Rem ove Right Speaker Module Rem ove CPU Fan