Acer Aspire 5732z Service Guide
Have a look at the manual Acer Aspire 5732z Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3111 4.Replace the three (3) screw caps as shown. 5.Connect the following cables to the Mainboard. AB C D
11 2Chapter 3 6.Connect A as shown.7.Connect C as shown. 8.Connect B and close the locking latch to secure the cable in place. 9.Connect D and close the locking latch to secure the cable in place. AC B D
Chapter 311 3 Replacing the LCD Module 10.Turn the computer over and replace the eleven screws as shown. 1.Align the screw holes on the LCD Module and Upper Cover and replace the LCD Module.2.The left and right screw covers are shaped differently. Ensure that the correct cover is used. 3.Replace the left screw cover as shown. Ensure that the securing tab on the rear of the cover is seated correctly in the Upper Cover. Left Screw CoverRight Screw Cover
11 4Chapter 3 4.Replace the right screw cover as shown. Ensure that the securing tab on the rear of the cover is seated correctly in the Upper Cover. 5.Replace the four (4) screws securing the LCD Module to the Upper Cover. 6.Ensure that the Hinge Covers are replaced correctly. Identify the rear edge of the covers by the two securing clips.7.Align the left Hinge Cover as shown and press down to replace the cover. 8.Repeat the process for the right side Hinge Cover. Rear Securing Clips
Chapter 311 5 9.Run the black Antenna cable along the cable channel as shown using all available retaining clips.10.Replace the adhesive strip to secure the cable in place. 11 .Run the white Antenna cable along the cable channel as shown using all available retaining clips. 12.Run the LCD cable along the cable channel using all available cable clips.13.Connect the LCD cable to the Mainboard as shown.
11 6Chapter 3 14.Stand the computer on the LCD Panel and pass the Antenna cables through the chassis. 15.The Upper Cover appears as shown when the Antenna and LCD cables are correctly installed. 16.Turn the computer over. Run the Antenna cables along the cable channel as shown, using all available cable clips.
Chapter 311 7 17.Replace the two (2) screws securing the LCD Module to the Lower Cover.
11 8Chapter 3 Replacing the Keyboard 1.Connect the Keyboard FFC to the Mainboard and close the locking latch to secure the cable in place. 2.Turn the Keyboard over and insert it front edge first into the chassis. NOTE: Ensure that the six locating tabs are correctly seated.3.Press down as indicated to secure the Keyboard in place.
Chapter 311 9 Replacing the Switch Cover Replacing the Hard Disk Drive Module 1.Place the Switch Cover left side first on to the Upper Cover. 2.Press down as indicated to snap the Switch Cover into place. 1.Place the HDD in the HDD carrier.2.Replace the four (4) screws (two each side) to secure the carrier.
120Chapter 3 3.Insert the HDD, as indicated and lower it into place.4.Slide the HDD in the direction of the arrow to connect the interface.