3M Super Close Projection System SCP715/SCP740/SCP717 Operators Guide
Have a look at the manual 3M Super Close Projection System SCP715/SCP740/SCP717 Operators Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 49
44 © 3M 2008. All Rights Reserved.
Appendices 3M™ Super Close Projection System
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example: [Fn]+[F3]
If you experience difficulty changing resolutions or...](http://img.usermanuals.tech/thumb/96/87375/w64_3m-scp717-manual_d-48.png "Page 49
44 © 3M 2008. All Rights Reserved.
Appendices 3M™ Super Close Projection System
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example: [Fn]+[F3]
If you experience difficulty changing resolutions or...")
46 © 3M 2008. All Rights Reserved.
Appendices 3M™ Super Close Projection System
Problem: Message Reminders
Power Off:
Replace the lamp:
© 3M 2008. All Rights Reserved. 47 3M™ Super Close Projection System Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message: When you see this message, change the lamp as soon as possible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp. Lamp Replacement Procedure: 1. Turn off the power by pressing the Power/Standby button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the 2 screws from the cover. 5. Push up and remove the cover. 6. Use a screwdriver to unscrew the 2 screws from the lamp module. 7. Pull up the lamp handle carefully. 8. Remove the lamp module. To replace the lamp module, reverse the previous steps. • Warning: Lamp compartment is hot! Allow 30 minutes to cool down before changing lamp! • Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. 1 3 4 52
48 © 3M 2008. All Rights Reserved. Appendices 3M™ Super Close Projection System Compatibility Modes ModeResolution(ANALOG)(DIGITAL) V.Frequency(Hz) H.Frequency(kHz) V.Frequency(Hz) H.Frequency(kHz) VGA640 x 3507031.57031.5 VGA640 x 3508537.98537.9 VGA640 x 4008537.98537.9 VGA640 x 4806031.56031.5 VGA640 x 4807237.97237.9 VGA640 x 4807537.57537.5 VGA640 x 4808543.38543.3 VGA720 x 4007031.57031.5 VGA720 x 4008537.98537.9 SVGA800 x 6005635.25635.2 SVGA800 x 6006037.96037.9 SVGA800 x 6007248.17248.1 SVGA800 x 6007546.97546.9 SVGA800 x 6008553.78553.7 XGA1024 x 7686048.46048.4 XGA1024 x 7687056.57056.5 XGA1024 x 7687560.07560.0 XGA1024 x 7688568.78568.7 * SXGA1152 x 8647063.87063.8 * SXGA1152 x 8647567.57567.5 * SXGA1152 x 8648577.18577.1 * SXGA1280 x 10246063.986063.98 * SXGA1280 x 10247579.987579.98 * SXGA1280 x 10248591.18591.1 * SXGA+1400 x 10506063.986063.98 * UXGA1600 x 120060756075 ModeResolution(ANALOG)(DIGITAL) V.Frequency(Hz) H.Frequency(kHz) V.Frequency(Hz) H.Frequency(kHz) MAC LC 13”640 x 48066.6634.98****** MAC II 13”640 x 48066.6835****** MAC 16”832 x 62474.5549.725****** MAC 19”1024 x 7687560.24****** * MAC1152 x 87075.0668.68****** MAC G4640 x 4806031.35****** i MAC DV1024 x 7687560****** * i MAC DV1152 x 8707568.49****** * i MAC DV1280 x 9606060****** • Remark : “*” compressed computer image.
© 3M 2008. All Rights Reserved. 49 3M™ Super Close Projection System Appendices RS232 Protocol Function List ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEND to projector ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 232 Code Function Projector Return Description ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR101 Power ON OK oo=01-99, projectors ID, oo=00 is for all projectors. IDooIR100 Power OFF OK is a CarriageReturn code : 0x13 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR001 Eco Mode On OK IDooIR002 Eco Mode Off OK IDooIR003 Resync. OK IDooIR004 Freeze OK IDooIR005 Unfreeze OK IDooIR006 Source lock on OK IDooIR007 Source lock off OK IDooIR008 Mute On OK IDooIR009 Mute Off OK IDooIR010 Zoom plus OK IDooIR011 Zoom minus OK IDooIR012 up ( Pan under zoom) OK IDooIR013 down ( Pan under zoom) OK IDooIR014 left ( Pan under zoom) OK IDooIR015 right ( Pan under zoom) OK IDooIR016 Reset OK IDooIR017 Information On OK IDooIR018 Information Off OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR020 Source select DVI OK IDooIR021 Ž VGA1 OK IDooIR022 Ž VGA2 OK IDooIR023 Ž S-Video OK IDooIR024 Ž Video OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR026 Blank On OK IDooIR027 Blank Off OK IDooIR030 Display Format 4:3 OK IDooIR031 Ž 16:9 OK IDooIR032 Ž Full OK IDooIR033 Ž Window OK IDooIR034 Ž Ltr. Box OK IDooIR038 Ž Auto OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR035 Color Temperature Low OK IDooIR036 Ž Medium OK IDooIR037 Ž High OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR048 Logo 3M OK IDooIR049 Ž User OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR050 Display Mode PC OK IDooIR051 Ž Photo OK IDooIR052 Ž Video OK IDooIR053 Ž Cinema OK IDooIR054 Ž sRGB OK IDooIR055 Ž UserOK----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR060 Mounting Off OK IDooIR061 Ž On OK IDooIR062 Rear Off OK IDooIR063 Ž On OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR069 Logo Capture OK IDooIR070 Signal Power On On OK IDooIR071 Signal Power On Off OK IDooIR072 High Altitude On OK IDooIR073 High Altitude Off OK IDooIR074 Keypad Lock On OK IDooIR075 Keypad Lock Off OK IDooIR076 Direct Power On On OK IDooIR077 Direct Power On Off OK IDooIR078 Eco.Standby On OK IDooIR079 Eco.Standby Off OK ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IDooIR080nnn Brightness OK nnn=000-100 , osd show value 0~100. IDooIR081nnn Contrast OK nnn=000-100 , center is 50 IDooIR082nnn Volume OK nnn=000-010 , center is 5 IDooIR083nnn White Intensity OK nnn=000-010 IDooIR084nnn Sharpness OK nnn=001-032 IDooIR085nnn Phase OK nnn=000-063 IDooIR087nnn V. Shift OK nnn=000-100 IDooIR088nnn Projector ID OKnnn=001-099IDooIR089nnn V. Keystone OK nnn= -40 ...... 000 ...... 040 , eg: “IDooIR088035 “ will set ver.keystone value as +35 IDooIR090nnn Auto Shutdown OK nnn=000-180, unit is 10 minutes IDooIR091nnn Presentation Timer OK nnn=000-099 IDooIR092nnn Saturation OK nnn=000-100 IDooIR093nnn Gamma OK nnn=000-003 , Gamma Curve only has 4 lines.
50 © 3M 2008. All Rights Reserved. Appendices 3M™ Super Close Projection System ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEND from projector automatically ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- when got invalid command NG when standby/warming/cooling/out of range INFOn n : 0/1/2/3 = standby / warm-up / cooling / out range ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- READ from projector ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 232 Code Function Projector Return Description ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IR098 Information OKabbbbcddddef a : 1/0=on/off bbbb : LampHour c : source 0/1/2/3/4/5= none/dvi/vga1/vga2/s-video/video dddd : FW version e : display mode f : status 0/1/2/3 = standby/warm-up/cooling/out range IR099 Info. to web only OK[data] ( !!! Caution !!! data[ ] are all ASIC character.) data[0] : Power 1/0=on/off data[1] : Lamp lit 1/0=ok/failed. data[2] : Eco Mode 1/0=on/off data[3] : Freeze 1/0=on/off data[4] : Source Lock 1/0=on/off data[5] : Mute 1/0=on/off data[6] : Information 1/0=on/off data[7] : Blank 1/0=on/off data[8] : High Altitude 1/0=on/off data[9] : Keypad Lock 1/0=on/off data[10] : -none- 0 data[11] : Signal Power On 1/0=on/off data[12] : Direct Power On 1/0=on/off data[13] : Eco Standby 1/0=on/off data[14] : Source 0/1/2/3/4/5/6= None/DVI/VGA1/VGA2/S-Video/Video data[15] : Display format 0/1/2/3/4/5=Auto/4:3/16:9/Full/window/LetterBoxdata[16] : Display mode 0/1/2/3/4/5= PC/Photo/Video/Cinema/sRGB/User data[17] : Colour temperature 0/1/2/=low/med/high data[18] : Gamma 0/1/2/3 data[19] : -none- 0 data[20] : Logo 0/1=3M/User data[21] : Mounting 1/0=on/off data[22] : Rear 1/0=on/off data[23..24] : Projector ID XX data[25..26] : Volume XX data[27..28] : Sharpness XX data[29..30] : Phase XX data[31..32] : White Intensity XX data[33..34] : Zoom XX data[35..37] : Brightness XXX data[38..40] : Contrast XXX data[41..43] : V Image Position XXX data[44..46] : Ver. keystone XXX data[47..49] : Auto Power Off XXX data[50..52] : Sleep Timer XXX ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Projector SEND to lan module ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 232 Code Function Lan module Return Description ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- IR110n alarm inform n : 0/1/2/3/4/5: Normal/Thermal Switch Error/Fan Lock/Over Temperature/Lamp Hours Running Out/Lamp Fail IR04901? Query lan module IR25901n n : n=AAAAAAAANNNNNNNNGGGGGGGGDDDDDDDDPC A: IP Address N: Subnet Mask G: Gateway D: DNS P: DHCP Mode(0/1: Off/ON) C: RJ-45 Connector State(0/1: Disconnect/Connect) IR23904n Set lan module IDooIR03904 n : n=AAAAAAAANNNNNNNNGGGGGGGGDDDDDDDD A: IP Address N: Subnet Mask G: Gateway D: DNS IR04905n Set lan module IDooIR03905 n : 1/0=DHCP on/off IR03903 Reset lan module
© 3M 2008. All Rights Reserved. 51 3M™ Super Close Projection System Appendices VGA-In Connector Pin no.NameI/O (From Projector Side 1TXDOUT 2RXDIN 3GND— Pin no.Spec. 1R(RED)/Cr 2G(GREEN)/Y 3B(BLUE)/Cb 4NC 5GND 6GND 7GND 8GND 9DDC 5V 10HOT–DET 11NC 12DDC Data 13HS/CS 14VS 15DDC Clock 123 10 45 6789 1112131415 12 3 RS232 Connector
52 © 3M 2008. All Rights Reserved. Appendices 3M™ Super Close Projection System Regulation & Safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accor- dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer.
© 3M 2008. All Rights Reserved. 53 3M™ Super Close Projection System Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • Electromagnetic Compatibility Directive 2004/108/EC • Low Voltage Directive 2006/95/E Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Disposal instructions