3M Super Close Projection System SCP715/SCP740/SCP717 Operators Guide

Super Close Projection System
SCP715/SCP740/SCP717
Operator ’s Guide
Important Note
Before using this product, please read the “Product Safety Guide” 
and related manuals to ensure the proper use of this product. After 
reading them, store them in a safe place for future reference.
www.3m.com/meetings
Super Close Projection System 
Operator ’s Guide
© 3M 2008.  All Rights Reserved
78-6971-1396-3 

                                                                               © 3M 2008.  All Rights Reserved. 
Contact 3M 
In the event of missing and/or damaged equipment, or technical questions\
, the following 
information can help in the completion of the installation.  
Customer Service – 1-800-328-1371 (US)
SCP 700 Series Warranty Statements
       Limited Warranty 
   •  
The 3M SCP700 Series projector (the “3M Product”) is warranted i\
s warranted to be 
free from defects in material or...

© 3M 2008.  All Rights Reserved.  iii

3M™ Super Close Projection System  Table of Contents
   a.  This warranty does not cover 3M Product that is modified or damaged through im-
proper storage, misuse, abuse, accident, vandalism, improper installatio\
n, neglect, 
improper shipping, damage caused by acts of war, disasters such as fire, flood, and 
lightning, improper electrical current, software problems, interaction w\
ith non-3M prod-
ucts, or service other than by an 3M Authorized Service Provider,...

iv  © 3M 2008.  All Rights Reserved.

Table of Contents  3M™ Super Close Projection System

EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M 
SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUEN-
TIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE 
OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, 
USE OR INABILITY TO USE ANY OF THE 3M PRODUCT.  This limitation applies regard-
less of the legal theory upon which damages are...

© 3M 2008.  All Rights Reserved.  v

3M™ Super Close Projection System Table of Contents

The 3M logo, and 3M are trademarks of the 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M\
’s products are 
based on information believed to be reliable, but the accuracy or comple\
teness is not 
guaranteed.  Before using this product or implementation, you must evalu\
ate them and de-
termine if they are suitable for your intended application or situation.\...

© 3M 2008.  All Rights Reserved.  1

3M™ Super Close Projection System Table of Contents
Table of Contents  ........................................................................\
.................1
Usage Notice  ........................................................................\
........................2Precautions........................................................................\
...................................2
Important Note...

2 © 3M 2008.  All Rights Reserved.

Usage Notice  3M™ Super Close Projection System  

Precautions
Follow all warnings, precautions and maintenance as 
recommended in this user’s guide to maximize the life of 
your unit.
WARNING
•  Do not look into the projector’s lens when the lamp is on. The 
bright light may hurt your eyes.
•  To reduce the risk of injury to the eyes, do not look directly into 
the laser light on the remote control and do not point the laser 
light into anyone eyes. This remote...

© 3M 2008.  All Rights Reserved.  3

3M™ Super Close Projection System Usage Notice

WARNING
•  Do not attempt to service the projector other than performing 
routine lamp replacement. Service should only be performed by 
a 3M authorized service provider. Aside from the projection lamp 
assembly, there are no serviceable parts inside the unit.
•  
Contact a 3M authorized service provider for service.
•  Do not modify this projector.
•   Do not allow water or other liquids to enter the projector.
•  
Do...

4 © 3M 2008.  All Rights Reserved.

Usage Notice  3M™ Super Close Projection System  

WARNING
•  Lamp replacement caution. Before removing the screws, discon-
nect the power cable. Hot surface inside. Allow 1 hour to cool 
before replacing the lamp. Handle with care. Risk of explosion. 
See Owner's Manual.
•  
Unplug the projector from the electrical outlet and allow the lamp 
to cool for 60 minutes before replacing the lamp.
•  Wait at least 30 minutes for the lamp assembly to cool before...

© 3M 2008.  All Rights Reserved.  5

3M™ Super Close Projection System Usage Notice

WARNING
•  Use only battery type AA.
   -   Orient the batteries plus (+) and (-) terminals of the batteries ac
-
cording to the markings found on the remote control.
   -   Do not leave the battery in the remote for an extended period of 
time.
   -   Do not heat, disassemble, short, recharge, or expose to fire or 
high temperature.
   -    Do not carry batteries loose in your pocket or purse.
   -   
Avoid eye and...