3M Digital Projector X90w Operators Manual

41
SCREEN Menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1. Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the 
current screen.
Please wait for the target image to be displayed, and press 
the ENTER button on the remote control when the image is...

42
SCREEN Menu
Item Description
MESSAGE8VLQJWKH
x
zEXWWRQVWXUQVRQRIIWKHPHVVDJHIXQFWLRQ
TURN ON 
Ù TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio displayed by changing
The indication of the...

43
OPTION Menu
OPTION Menu
Item Description
AUTO SEARCH
8VLQJWKH
x
zEXWWRQVWXUQVRQRIIWKHDXWRPDWLFVLJQDOVHDUFKIXQFWLRQ
TURN ON 
Ù TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started from the 
current port. Then when an input is found, the projector will stop searching 
and display the image.
RGB 1
Ö RGB 2
Ö M1-D
ÖMIU 
Ö COMPONENT 
Ö S-VIDEO 
Ö VIDEO 
• The MIU input is skipped, as long as no image...

44
Item Description
AUTO OFF8VLQJWKH
x
zEXWWRQVDGMXVWVWKHWLPHWRFRXQWGRZQWR
automatically turn the projector off.
Long (max. 99 minutes) 
Ù Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
1AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote...

45
Item Description
MY BUTTONThis item is to assign one of the following function to MY BUTTON 
1 and 2 on the remote control (
	6).
&KRRVHRURQWKH0

46
Item Description
SERVICE
(continued)AUTO ADJUST
8VLQJWKH
x
zEXWWRQVHQDEOHVGLVDEOHVWKH
automatic adjustment.When DISABLE is selected, 
the automatic adjustment feature is disabled, 
although rough adjustment is automatically performed 
depending on the basic setting.
ENABLE
Ù DISABLE
• Depending on conditions, such as input image, signal cable to 
the projector, environment around the projector, etc., the automatic 
adjustment may not work correctly.  In such a case, please 
choose DISABLE to...

47
Item Description
SERVICE
(continued)KEY LOCK
8VLQJ WKH 
x
z EXWWRQV WXUQV RQRII WKH NH\ ORFN IHDWXUH :KHQ
TURN ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
TURN ON 
Ù TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
REMOTE RECEIV.
6HOHFWDUHPRWHVHQVRUXVLQJWKH
x
zEXWWRQ
1:FRONT 
Ù2:TOP 
Ù 3:REAR
(2) Switch it using the ENTER button
… (off) 
Ù; (on)
• A...

48
Item Description
SECURITYThis projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
8VHWKH
x
zEXWWRQVRQWKH237,21
PHQXWRVHOHFW6(&85,7

49
Item Description
SECURITY
(continued)1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button 
on the remote control for about 3 seconds or 
SUHVVDQGKROGWKH,1387DQG
yEXWWRQVRQ
the projector for about 3 seconds.
The 10 digit Inquiring Code will be displayed. 
• If there is no key input for about 55 seconds while 
the Inquiring Code is displayed the menu will...

50
Item Description
SECURITY
(continued)
2.2-4 Move the cursor to the right side of the 
CHECK PASSWORD BOX and press the 

yEXWWRQWRGLVSOD\WKH3$66:25IRU
about 20 seconds, please make note of the 
PASSWORD during this time. 
Pressing the ENTER button on the remote control 
or INPUT button on the projector will return to 
MyScreen PASS WORD on/off menu.
When a PASSWORD is set for MyScreen:
•The MyScreen registration function (and menu) will be unavailable.
•The MyScreen Lock function (and menu)...