3M Digital Projector X90w Operators Manual

1
Digital Projector X90w
Operators Guide
Thank you for purchasing this projector.
WARNING
yBefore using this product, please read the "Product Safety 
Guide" and related manuals to ensure the proper use of this product. After 
reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNINGThis symbol indicates information that, if ignored, could possibly 
result in personal...

2
About this manual.......... 1
Content .................. 2
Projector features.......... 3
Preparations.............. 3
Contents of package .............3
Fastening the lens cover ..........3
Part names ............... 4
Projector  ......................4
Control panel ...................5
Rear panel .....................5
Remote control  .................6
Setting up ................ 7
Arrangement ...................8
Adjusting the projector's elevator  . . .9
Using the security bar and slot...

3
Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover to the projector using 
the included strap.
1.Fix the strap to the strap hole of the lens 
cover.
2.Put one side of the strap into the groove on 
the rivet.
3.Push the rivet into the rivet hole.
Projector features / Preparations
Projector features
This projector is used to project various picture signals onto a screen. This 
projector requires only a minimal amount of space for installation and can produce 
a large...

4
Part names
Part names
Projector
(1) Speakers (x 4) (	38).
(2) Focus ring (
	20)
(3) Zoom ring (
	20)
(4) Lamp door (
	59)
The lamp unit is inside.
(5) Lens shift cover (
	20)
(6) Horizontal lens shift dial (
	20)
(7) Vertical lens shift dial (
	20)
(8) Front cover
(9) Lens (
	64)
(10) Lens cover (
	3)
(11) Remote sensors (x 3) (
	15)
(12) Elevator feet (x 2) (
	9)
(13) Elevator knobs (x 2) (
	9)
(14) Filter cover (
	61)
7KHDLU¿OWHUDQGLQWDNHYHQWDUH
inside.
(15) Exhaust vents
(16) Intake vents...

5
Part names
Control panel
(1) STANDBY/ON button (	17)
(2) MENU button (
	24)
It consists of four cursor buttons.
(3) INPUT button (
	18)
(4) POWER indicator (
	17)
(5) TEMP indicator (
	66)
(6) LAMP indicator (
	66)
Rear panel
(1) Shutdown switch (	68)
(2) Security slot (
	9)
(3) Security bar (
	9)
(4) AC inlet (
	13)
(5) Power switch (
	17)
(6) RGB1 port (
	10)
(7) RGB2 port (
	10)
(8) CONTROL port (
	10)
(9) M1-D port (
	10)
(10) VIDEO port (
	10)
(11) S-VIDEO port (
	10)
(12) COMPONENT 
(Y, C
B/PB,...

6
Part names
Remote control
(1) Laser pointer (	14)
It is a beam outlet.
(2) LASER INDICATOR (
	14)
(3) LASER button (
	14)
(4) STANDBY/ON button (
	17)
(5) VOLUME button (
	18)
(6) MUTE button (
	18)
(7) VIDEO button (
	19)
(8) RGB button (
	18)
(9) SEARCH button (
	19)
(10) AUTO button (
	20)
(11) ASPECT button (
	19)
(12) POSITION button (
	21)
(13) KEYSTONE button (
	21)
(14) MAGNIFY - ON button (
	22)
(15) MAGNIFY - OFF button (
	22)
(16) FREEZE button (
	22)
(17) BLANK button (
	23)
(18) MY BUTTON...

7
Setting up
Setting up
Install the projector according to the environment and manner the projector will be 
used in.
WARNING
yPlace the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage to the 
SURMHFWRUQGRUHOHFWULF
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such 
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position. 
• Consult with your dealer...

8
Arrangement
Refer to the illustrations and tables below to determine screen size and projection distance.
The values shown in the table are calculated for a full size screen: 1024×768
(a) Screen size (diagonal)
(b) Projection distance (±10%)
(c) Screen height (±10%), when the vertical lens shift (
	20) is set full upward.
Setting up
(a) Screen 
size
[inch (m)]4 : 3 screen 16 : 9 screen
(b) Projection distance 
[m (inch)](c) Screen height
[cm (inch)](b) Projection distance 
[m (inch)](c) Screen height...

9
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project at 
a suitable angle to the screen, elevating the front side of the 
projector within 8 degrees.
This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is 
adjustable while pulling up the elevator knob on the same side as it.
1.Holding the...

10
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. 
Make sure that all the devices are suitable to be connected with this product, and 
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
WARNING
yRQRWGLVDVVHPEOHRUPRGLI\WKHSURMHFWRU
EOHV
CAUTION
y7XUQRI
connecting them to projector. Connecting a live device to the projector may 
generate extremely loud noises or other...