3M Digital Projector X90w Operators Manual

51
Item Description
SECURITY
(continued)
,QSXWDSDUW3,1&RGHXVLQJWKH
x
z
{
y
/RGB and INPUT buttons.
A CONFIRMATION BOX will appear. Reenter the 
same PIN Code. This will complete the PIN Code 
registration.
•If there is no key input for about 55 seconds while 
the PIN BOX or the CONFIRMATION BOX are 
displayed the menu will close. If necessary repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch is turned off the PIN BOX will be...

52
Item Description
SECURITY
(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the 
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting 
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector...

53
Item Description
SECURITY
(continued)4.3 Setting the Transition Detector off
4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
If an incorrect PASSWORD is input the menu will close. If necessary repeat 
the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1 Follow the procedure in 4.1-1 to...

54
(continued on next page)
Item Description
LIVE MODESelecting this item sets the projector onto the “Live Mode”. 
On the “Live Mode”, the projector displays the images from the PC 
via Network, supported by “MIU Live Viewer”. (
	 1.1 Live Mode of 
the User’s Manual - Network Functions)
PC-LESS
PRESENTATIONSelecting this item displays the PC-LESS PRESENTATION menu.
Using the menu is able to make the projector 
display the images stored in SD card or USB 
memory, and realizes a presentation without PC....

55
(continued on next page)
Item Operation
e-SHOTSelecting this item displays the e-SHOT menu.
8VHWKH
x
zEXWWRQVWRVHOHFWDQLWHPZKLFK
is a still image by the e-SHOT (
	4.7 e-SHOT 
(Still Image Transfer) Display of the User’s 
Manual - Network Functions)DQGWKH
yRU
ENTER button to display the image.
• Insert the SD memory card or USB memory into the projector 
before you use the e-SHOT function. (
	12)
• The item without image stored cannot be selected.
• The image names are each displayed in...

56
Item Description
SETUP
(continued)IP ADDRESS
Use the 
x
z
{
yEXWWRQVWRHQWHUWKH,3
ADDRESS. This function can only be used 
when DHCP is set to TURN OFF.
• The ,3$5(66LVWKHQXPEHUWKDWLGHQWL

57
Item Description
SETUP
(continued)MODE
8VHWKH
x
zEXWWRQVWRVHOHFWWKHPRGHRI
the network communication system. Select it 
according to the setting of your PC.
ADHOC
Ù INFRASTRUCTURE
CH
8VHWKH
x
zEXWWRQVWRVHOHFWWKHFKDQQHO
of the wireless LAN while using it. Select it 
according to the setting of your PC.
The channels 1 to 11 are available.
• The available channels would be various depending on a country. 
In addition, wireless LAN card might be required due to the 
standard.
ENCRYPTION...

58
MIU Menu
Item Description
INFORMATION
6HOHFWLQJWKLVLWHPGLVSOD\VWKH0,8,1)250$7,21GLDORJIRUFRQ

59
Maintenance
Lamp
$RIWLPHFRXOGFDXVH
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact your dealer and tell the lamp type number.
Type number = 78-6969-9893-5
Replacing the lamp
1.Turn the projector off, and unplug the power cord. 
Allow the projector to cool for at least 45 minutes.
2.Prepare a new...

60
Maintenance
Lamp (continued)
Lamp warning
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING

y7KHSURMHFWRUXVHVDKLJKSUHVVXUHPHUFXU\JODVVODPS7KH
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
WKHODPSKRXVLQJDQG
for gas containing mercury to escape from the projector’s vent holes.

yAbout disposal...