GXK-012
Animal Weighing Bowl
Instruction Manual
Models
GX-K series
GF-K series
Weighing
Setup
1 Replace the normal weighing pan with the animal weighing bowl (GXK-012).
Measurement
2 Press the
RE-ZERO key to cancel the weight (tare).
3 Place a sample animal in the bowl to weigh it.
Caution
When using the animal weighing mode (Hold function), the average weight of the
animal can be displayed.
When using this option, the weighing range that can...
Auto-Centering Pan (AX-MC1000PAN / MC6100PAN )
Instruction Manual
Read this manual thoroughly before using the auto-centering pan and keep it at hand for future reference. １．Introduction
The auto-centering pans are used with the MC series
Mass Comparator Balances
, the
AX-MC1000PAN with the MC-1000 and the MC6100PAN with the MC-6100. The balance can
achieve more precise weighing, by using the auto-centering pan, which aligns the center of
gravity of the material being weighed (a weight) with the...
Auto-Centering Pan（AX-MC10K/30KPAN）
Instruction manual
Read this manual thoroughly before using the Auto-Centering Pan and keep it at hand
for future reference.
1. Introduction
The auto-centering pans are used with the MC series Mass Comparator Balances,
the AX-MC10KPAN with the MC-10K and the AX-MC30KPAN with the MC-30K. The
balance can achieve more precise weighing, by using the auto-centering pan, which
aligns the center of gravity of the material to be weighed (a weight) with the pan...
1WMPD4002999
ＢＭシリーズ用本体カバー
カバーは保管時にホコリや汚れ防止としてご利用してください。
カバーはＡＣアダプタやその他のケーブルを接続した
状態でご利用いただけます。
カバーを取り外すときはカバーの端が機器に引っかか
らないようにしてださい。
仕様
材質： ナイロン
色： ライトグレー
Dust Cover for BM series
Use the cover to protect the instrument from dust and dirt during storage.
It is possible to use the cover while the instrument is connected to the AC adapter and other cables.
When removing the cover take care so as not to get its edge caught on the instrument....
WM+PD4001368
F F
S S
- -
i i
S S
e e
r r
i i
e e
s s
C C
h h
e e
c c
k k
W W
e e
i i
g g
h h
i i
n n
g g
S S
c c
a a
l l
e e
s s
O O
p p
t t
i i
o o
n n
OP-02 / OP-03 / OP-04
FXi-02 / HRA-02 USB Interface Instruction Manual
1. Features
Connects a balance (FX-i / FZ-i series, HR-A / HR-AZ series) to a personal computer to transmit the balance
weight data to the personal computer via USB. Applicable OS is Windows 2000 or later.
Because a Windows standard driver is used, complicated installation of a dedicated driver is not necessary.
Once a connection between the balance and the personal computer is made, weight data can be
transmitted. (Quick USB function)
...
FXi-08 HRA-08 FXi-08
HRA-08
Ethernet Interface
When installing this Ethernet board (
FXi-08 HRA-08
) into the A&D balances, such as
FX-i, FZ-i,
HR-A HR-AZ
, the balance can communicate with a computer through the LAN port and the
weighing data can be managed with the software "Wi n CT- Pl us".
Unpacking the Ethernet Board
Installing the Ethernet Board
Caution:
Remove the AC adapter from the balance while
doing the following work.
Step...
1WMPD4001369A
1WMPD4001658
FXi-WP-11 Large Breeze Break
1. Features
The FXi-WP-11 can be installed on the FX- i WP series
balances.
Using the FX i-WP-11 will protect the balance from the
effects of a breeze and will provide more accurate
weighing results.
An anti-static treatment has been applied to the breeze
break components, therefore the weighing error caused
by static electricity should not be a problem.
2. Unpacking
*
The FX i-WP-11 is set on top of the balance, not fastened....
GH-02 USB Interface Instruction Manual
1. Features
The GH-02 USB interface connects a GH series analytical balance to a personal computer and is used to
transmit the balance weight data to the personal computer via USB. Applicable operating system is Windows
98 or later.
As the Windows standard driver is used to transmit the weight data, complicated installation of a dedicated
driver is not necessary.
The personal computer recognizes the GH-02 interface much like a keyboard, and...
GX-02 USB Interface Instruction Manual
1. Features
The GX-02 USB interface connects a GX or GF series multi-function balance to a personal computer and is used
to transmit the balance weight data to the personal computer via USB. Applicable operating system is
Windows 98 or later.
As the Windows standard driver is used to transmit the weight data, complicated installation of a dedicated
driver is not necessary.
The personal computer recognizes the GX-02 interface much like a keyboard,...
About the MC series balance function settings
§ Factory settings have been changed for stable weighing
The factory settings described on page 31 of the MC series instruction manual have been changed.
The MC series are high resolution balances. Therefore, external disturbances such as breezes or vibrations
may cause unstable weighing values.
For stable weighing, the factory settings of the following functions have been changed to those more
resistant to external disturbances, as shown below....
SCE-02 USB Interface Instruction Manual
1. Features
• Connects a scale to a personal computer and used to transmit the scale weight data to the
personal computer via USB. Applicable OS is Windows 98SE or later.
• As a standard Windows driver is used, complicated installation of a dedicated driver is not
necessary. Once a connection between the scale and the personal computer is made, the weight
data can be transmitted.
• Transmits the scale weight data to any application such as Excel,...
