Zenith Projector Lxg 135 User Manual

31
Flipping V Flipping V
ertical ertical
Press the MENU button and 
move the 
POINTERup or down to 
select the SPECIAL menu. 
1
Press the ENTERbutton and 
move the 
POINTER up or down to 
select the 
Flip Verticaloption.2
Press the ENTERbutton to see the reverse image.
lEach time you press the ENTER button, the image is reversed.lTo remove the menu display, press the MENUbutton repeatedly.
3
lThis function reverses the upper and the lower side of the projected image. l If you hang the projector upside...

32
SPECIAL
FUNCTIONS
Using the Blank Function
lThis function blanks the Video and mutes the Audio.
Press the BLANKbutton.
• The screen will blank and the audio will be muted.
• You can choose the background color. Refer to page 32. 
1
To exit the blank status mode, press the BLANKbutton again.2 

33
TITLEUsing the Blank Function
Selecting Blank Image Color Selecting Blank Image Color
Press the MENU button and 
move the 
POINTERup or down to 
select the SPECIAL menu.
1
Press the ENTERbutton and 
move the 
POINTERup or down to 
select the 
Blank Imageoption.2
Move the POINTERleft or 
right to select the color you want to use. 
lBackground color changes to the selected color.lTo remove the menu display, press the MENUbutton repeatedly.
3
exit           move        selectMenuG VIDEOG...

SPECIAL
FUNCTIONS
34
Checking Lamp Time
Press the MENUbutton and 
move the 
POINTERup or down to 
select the SPECIAL menu as
shown below.1
Press the ENTER button and move the POINTERup or down to select the Lamp Timeoption.2
lThe elapsed lamp time is displayed in hours.l When the lamp time reaches 1400 hours, the lamp indicator changes to an orange color.
exit           move        enterMenuG VIDEOG POSITIONG SPECIALG TRACKING
exit          move      MenuG VIDEOG POSITIONESPECIALLanguage
Flip Horizontal...

35
Selecting PC Screen Size Input Signal
Press the MENUbutton and 
move the 
POINTERup or down to 
select the SPECIAL menu as
shown below.
lWhen using the PC input mode, before turning on the PC, select the appropriate screen size in the 
SPECIAL menu. This will enable the image size of the PC in DOS mode to fit on the projection screen.  
lFor other screen size signals except 640X400 70Hz and 720X400 70Hz, the projected image sizes are
adjusted automatically.
1
Press the ENTER button and move the...

POSITION-
ING
36
Adjusting Screen Display 
Positioning Positioning
Press the MENUbutton and 
move the 
POINTERup or down to 
select the POSITION menu. 
1
Press the ENTERbutton and move the POINTER up or down to select the Horizontal, Vertical
or Keystoneoption. 
lIf the image size does not fit the screen properly, choose the position of the image by selecting the
Horizontal/ Verticaloption.
lKeystone function adjusts the upper and lower width of the projected image to prevent the image
shape from...

37
Adjusting Screen Display 
Zoom Function Zoom Function
Press the ZOOMbutton.1
Move to the position you want to see the enlarged display by moving the POINTERbutton left,
right, up, or down.4
Press the ZOOMbutton again to return to normal viewing.5
Press the  LMOUSEor  R  MOUSEbutton to adjust the zoom level.
l LMOUSEbutton makes the image look smaller.l R MOUSEbutton makes the image look larger.
3
Move the POINTER button to the position you wish to see enlarged. Press the ENTER button to
enlarge the...

38
Using the Resize Function
lYou can use this function only in SVGA (800x600) mode.
lYou can also access this function in the on-screen menus.
Press the RESIZEbutton.
Each press of the button changes the display as below.
Scaled4 : 3
Original16 : 9
PC mode
AV mode
VIDEO
1 

39
Adjusting Video 
Press the MENUbutton and 
move the 
POINTERup or down to 
select the VIDEO menu. 
1
Move the POINTERbutton up or down to select the desired video option.3
Move the POINTERbutton left or right or press the VOLUMEbuttons to adjust the selected video
option: 
l To restore the original image condition select the Reset option and press ENTER.l To remove the menu display, press the MENUbutton repeatedly.
4
Press the ENTERbutton.2PC Mode PC Mode
AV Mode
AV Mode
exit           move...

TRACKING
40
Using Tracking Function
lAuto Tracking Function
This function automatically adjusts the difference of horizontal width and tremor of the image. This difference is caused
by discord of the internal signal of the projector and diverse graphic signals of PC.
lImage positioning and tremor adjustment are automatically performed.
Press the AUTO TRACKINGbutton.
lYou can also access this function by using the MENUbutton.lPerform this function while on a stationary image. You may not get the optimum...