Zenith Projector Lxg 135 User Manual

21
Connection to Video / S-Video Sources
Standard A/V (Audio/Video) Connections
a. When connecting the projector to an A/V source, connect the A/V input ports on the projector to the out-
put ports on the A/V source using A/V cables. The video cable is yellow. The left audio is white and right
audio is red.
S-VHS Video Connections
b. Connect S-Video input port on the projector to S-Video output port on A/V source with an S-Video cable.
* For better picture quality, use the S-Video source connection...

22
Connecting to a DTV Settop Box
Computer OutComputer In Mouse
Computer
Audio
K
Audio Video S-VideoR L/MONO
DTV OUT(R) AUDIO (L) 
Connections
a. Connect Computer 1of the projector to DTV OUTof the DTV Set-top Box.
b. Connect the Audio input ports (R, L/Mono) of the projector to the Audio output ports (R, L) of the DTV
Set-top Box.a b
DTV Set-top Box
INSTALLATION AND
CONNECTION
lTo receive HDTV programming, a DTV receiver (Set-top Box) must be connected to the projector. 

23
Turning on the Projector
Remove the projector lens cover.
Press the main power button on the projector cabinet back panel.1
Press the POWERbutton on the remote control or top cover. (
Green operation indicator flashes
during warming up of the lamp.)
lAn image appears only after the green power indicator has flashed for some time.
3 2
Adjust volume level.
lUse the Volume buttons to increase or decrease the sound level.5
24
• Do not shut off the main power (back panel switch) or unplug the power cord...

BASIC
FUNCTIONS
24
Projector Operation
Focusing and Positioning the Projected Image Focusing and Positioning the Projected Image
When an image appears on the screen, make certain that the picture is focused and fits well
on the screen.
l To adjust the focus, rotate the focus (outer) ring on the lens.l  To adjust the size of the image, rotate the zoom (inner) ring on the lens.
To raise or lower the image on the screen, extend or retract the foot at the bottom of the pro-
jector by pushing the foot...

25
Projector Operation
If the projector is installed on a surface that is not stable or flat, the projected image shape
will be distorted.
MENUSOURCEPATTERNENTERVOL
VOLPOWER
Horizontal leveler
l To correct this condition, adjust the projector’s position using the horizontal leveler as shown above. 

BASIC
FUNCTIONS
26
Functions Check
3
Press the MENUbutton.1
Move the POINTERbutton up or down to select a menu and press the ENTERbutton. Each press of
the button will cycle through the available menus.
Move the 
POINTERbutton up or down to 
select a function that you want to use or adjust.
lWithout an input signal from a PC or Video source, the On-Screen Display (OSD) doesn’t appear.
lTo remove the menu display, press the 
MENUbutton repeatedly.
* In AV  mode, Horizontal/ Verticalin POSITION menu, VGA...

27
Selecting Viewing Sources
Press the SOURCEbutton. 1
Each press of the SOURCEbutton changes the display as shown below.
2
PCAV 

SPECIAL
FUNCTIONS
28
Using the Still Function
Press the STILLbutton.
• You can freeze the input image from a PC or A/V source.1
To return to normal video, press the STILLbutton again.2
Moving ImageStill Image 

29
Menu Language Selection
Press the MENUbutton and 
move the 
POINTERup or down to 
select the SPECIAL menu as
shown below.1
Press the ENTERbutton and 
move the 
POINTERup or down to 
select the 
Languageoption.
Move the 
POINTERbutton left or 
right to select the language you want to use.
l  On-Screen-Display (OSD) will change to the language chosen.lTo remove the menu display, press the MENUbutton repeatedly.
2
3
exit           move        enterMenuG VIDEOG POSITIONG SPECIALG TRACKING
exit...

SPECIAL
FUNCTIONS
30
Using Flip Horizontal / Vertical Functions
Flipping Horizontal Flipping Horizontal
Press the MENU button and 
move the 
POINTERup or down to 
select the SPECIAL menu.
1
Press the ENTERbutton and 
move the 
POINTER up or down to 
select the 
Flip Horizontaloption.2
Press the ENTERbutton to see the reversed image.
lEach time you press the ENTER button, the image will be reversed.lTo remove the menu display, press the MENUbutton repeatedly.
3
lThis function reverses the left and the...