Zenith Projector Lxg 135 User Manual

3
SAFETY INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral...

INTRODUCTION
4
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However,
improper use can result in potential electrical shock or fire hazards. To avoid defeating
the safeguards that have been built into your new product, please read and observe
the following safety points when installing and using your new product, and save them
for future reference.
Observing the simple precautions discussed in this booklet can help you get many...

5
SAFETY INSTRUCTIONS
stops, excessive force, and uneven
surfaces may cause the product and
cart combination to overturn.
9. Attachments
Do not use attachments not recom-
mended by the product manufacturer
as they may cause hazards.
10. Ventilation
Slots and openings in the cabinet are
provided for ventilation and to ensure
reliable operation of the product and
to protect it from overheating. These
openings must not be blocked or cov-
ered. The openings should never be
blocked by placing the product on...

INTRODUCTION
6
17. Servicing
Do not attempt to service this product
yourself as opening or removing cov-
ers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service person-
nel.
18. Damage Requiring
Service
Unplug this product from the wall out-
let and refer servicing to qualified ser-
vice personnel under the following
conditions:
a. If the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects
have fallen into the product.
c. If the...

7
Feature Locations
MENUSOURCEPATTERNENTERVOL
VOL
POWER
Computer Out
AC Computer In Mouse
Computer
    Audio
K
Audio Video S-VideoR L/MONO
Projector Cabinet Projector Cabinet
Connections Panel Connections Panel
Rear remote 
control sensor
Handle
Foot adjustment
button Indicators
Front remote
control sensor Horizontal
leveler
Focus ringLens cover
Foot
Computer Audio Computer Out
Computer In
Audio / Video 
Main power button
Kensington Security 
System Connector
(Refer to page 12)
Rear remote control sensor...

INTRODUCTION
8
Control Panel Control Panel
MENU
SOURCEPATTERNENTER
VOL
VOL
POWER
POWER/Power standby
indicator
,Use to
select menus and
menu options.
MENUChooses and
closes menus.
SOURCEUse to select PC, AV, 
and S-VIDEO sources.
VOLUME 
Adjusts volume level and  
menu options.
ENTER Displays present mode and 
saves menu changes.
PATTERN
Press PATTERN to show the
focus adjustment menu. 

L MOUSE
(Zoom-out)R  MOUSE 
(Zoom-in)
POINTER
9
Remote Control / Battery Installation
Remote Functions  Remote Functions 
Installing the batteries Installing the batteries
POWER
SOURCE
MOUSE DRAG
BLANK
RESIZE
AUTO TRACKING
Slide the battery cover
in the direction of the
arrow and remove it.VOLUME
MENU
ENTER
LASER
STILL
MUTE
ZOOM
1
Install two AA batteries,
observing correct polarity.
2
Reinstall the battery
compartment cover as
shown.
3 

INTRODUCTION
Button Button
Function Function
POWER Switches power ON/OFF.
SOURCE Switches to PC or AV mode.
MENU Displays or removes menus.
L MOUSE  * Corresponds to the Left - Click of PC Mouse.  This button 
(Zoom-out Button)registers a menu selection and selects other custom functions.
* Downsizes the screen for the zoom function.
R  MOUSE * 
Corresponds to the Right - Click of a PC Mouse. This button 
(Zoom-in Button) registers a menu selection and selects other custom functions. 
* Enlarges the...