Zanussi Zwy 1100 User Manual
Here you can view all the pages of manual Zanussi Zwy 1100 User Manual. The Zanussi manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3 How to run a wash cycle? _ _ _ _ _ _ _ _ _ _ 4 Daily Use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Programmes table _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Operating Problems _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Detergents and Additives _ _ _ _ _ _ _ _ _ _ 9 Technical Specifications _ _ _ _ _ _ _ _ _ _ 10 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _...
Page 3
This way, the water remaining in the hoses will be drained away, avoiding any ice formation which would damage your appliance. Before turning your appliance on again, ensure that it is installed in an area where the tempera- ture will not fall below freezing. Use • Your appliance is intended for normal do- mestic use. Do not use the appliance for commercial or industrial purposes or for any other purpose. • Refer to the instructions on the label of each item before washing. • Do not put items into the...
Page 4
The control panel 1234 1. Programme selector 2. Pushbuttons and their functions 3. Lights of cycle progress 4. "Start/Pause" pushbutton Dispenser box 1 2 3 4 5 1 Softener (do not fill above the MAX symbol ) 2 Bleaching agent can be used on Cot- ton programmes without prewash - 1/4 to 1 glass of diluted bleach (do not fill above the MAX symbol) 3 Wash 4 Prewash 5Fabric softener and bleach overflow (if overfilled) How to run a wash cycle? Using for the first time • Ensure the electrical and water...
Page 5
Daily Use Loading washing • Open the lid of the appliance. • Open the drum by depressing the locking button A: The two shutters unlock automati- cally. •Load the washing, close the drum and the lid of your washing machine. Warning! Before closing the lid of your appliance, ensure that the drum is properly closed : • When the two shutters are closed, • locking button A released. Proportioning of detergents Pour the amount of washing powder into the washing and prewash compartments if you have selected...
Page 6
Start of the programme Press the “Start/Pause” button to start the cy- cle. The corresponding light will come on green. It is normal for the programme selector to remain stationary during the cycle. The light corresponding to the current cycle is illumina- ted. + : Prewash + Wash + : Rinses + Spin : End of cycle Interrupting a programme Adding washing during the first 10 mi- nutes Press the “Start/Pause” pushbutton : the corresponding light will flash green while the appliance is paused. The lid...
Page 7
Programme / Type of washingLoadPossible options Rinses : Hand washed items can be rinsed in this programme.5,0 kgRinse plus, Rinse hold Drain : Runs an empty cycle after a Rinse hold (or Night cycle plus).5,0 kg Spin : A spin cycle from 500 to 800/10002) after a Rinse hold option. 5,0 kg 1) Standard programmes for the Energy Label consumption values According to regulation 1061/2010, the “Eco 60 °C” and “Eco 40 °C” are respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton...
Page 8
7 8 9 10 CLACK 11CLACK Water inlet filters To clean, proceed as follows : Operating Problems Numerous checks were carried out on your ap- pliance before it left the factory. However, should you notice a malfunction, please refer tothe sections below before contacting the after- sales service. ProblemsCauses The appliance doesn’t start or doesn’t fill:• the appliance isn’t plugged in correctly, the electrical installation isn’t work- ing, there is a power failure, • the lid of your appliance and the...
Page 9
ProblemsCauses The washing results are not satisfactory :• the detergent is unsuitable for machine washing, • there is too much washing in the drum, • the wash cycle is unsuitable, • there isn’t enough detergent. The appliance vibrates, is noisy:• all packaging have not been removed from the appliance (see “Installation”), • the appliance isn’t level and is unbalanced (see “Installation”), • the appliance is too close to the wall or furniture, • washing is unevenly distributed in the drum, the load is...
Page 10
Technical Specifications DIMENSIONSHeight Width Depth850 mm 400 mm 600 mm LINE VOLTAGE /FREQUENCY POWER CONSUMPTION FUSE 230 V / 50 Hz 2300 W 10 A Level of protection against ingress of solid particles and moistureIPX4 Water supplyCold water WATER PRESSUREMinimum Maximum0,05 MPa (0,5 bar) 0,8 MPa (8 bar) Connection to water supply Type 20/27 Consumption values The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient...