Home > Zanussi > Washing Machine > Zanussi Zwi 1125 User Manual

Zanussi Zwi 1125 User Manual

Here you can view all the pages of manual Zanussi Zwi 1125 User Manual. The Zanussi manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.

Page 21

SHOWER
WASHING
MACHINEDISHWASHER BATHSINKTOILET
BIDET
RAINWATER
‘RUN-OFF’
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER RIVERTREATED DISCHARGEFOUL DRAIN
FOUL SEWERS
SEWAGE TREATMENT
WORKS
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or compe-
tent person.
Warning! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this
safety measure not be observed.
Before switching on, make sure the...

Page 22

A
600
596 555
170 75176,5
416
100 60818 min.
820min.
560
When installing the appliance into the kitchen furniture
ensure, if possible, the hoses are placed in either of the
two recesses on the back of the appliance.
This will help to prevent the hoses from becoming
kinked or trapped.
B
1
23
75
6
4
8
Caution! Do not remove the screw 8!
Preparation and assembly of the door
The machine is originally prearranged for the assembly
of a door opening from right to left.
In this case it is sufficient to screw in...

Page 23

D
4
6
8
Caution! Do not remove the screw 8!
d) Counter-magnet (6)
The appliance is prearranged for a magnetic closure of
the door.
To enable a correct operation of this device, it is neces-
sary to screw the counter-magnet (6) (steel disk + rub-
ber ring) into the inner side of the door. Its position
must correspond to the magnet (4) on the appliance
(see picture D).
E
1
2 3
75
6
4
8
Caution! Do not remove the screw 8!
If the door has to be opened from left to right, invert the
position of the plates...

Page 24

Drill four fixing holes see Fig. G
Position the base into the recess with its front edge as
far forward as the adjoining plinth line will allow.
The reason for placing the base in this position is to al-
low a small strip of beading to be fitted in front of the
appliance feet.
Graphic H
600-605 4905 x 25 x 605
Hardwood strip
5 mm x 25 mm
Fix the base firmly to the floor using four appropriate
countersunk screws (see Fig. H).
With the appliance installed adjust all four feet ensuring
the machine is...

Page 25

 25
 

Page 26

26
 
 

Page 27

 27
 

Page 28

 www.zanussi.com/shop
   
132966891-A-462011
 
Start reading Zanussi Zwi 1125 User Manual

Related Manuals for Zanussi Zwi 1125 User Manual

All Zanussi manuals