Zanussi Zwg 680 P User Manual

ProgrammesLoad
(kg)Energy con-
sumption
(kWh)Water con-
sumption (li-
tre)Approxi-
mate pro-
gramme
duration
(minutes)Remaining
moisture
(%)
1)
ZWG 680P
Remaining
moisture
(%)
1)
ZWG
6100P
Cottons 60 °C61.20721706660
Cottons 40 °C60.75721456660
Synthetics 40
°C30.6057953737
Delicates 40
°C30.6065753737
Wool/Hand
wash 30 °C20.3048553732
Standard cotton programmes
Standard 60 °C
cotton61.07541946660
Standard 60 °C
cotton30.79431726660
Standard 40 °C
cotton30.61431676660
1) At the end of spin phase.
Off...

• To aid cleaning,
the top part of the
additive compart-
ment should be re-
moved.
• Use a stiff brush to clean and remove all
washing powder residue.
• Clean all the removed parts of the dispens-
er drawer under a tap to remove any traces
of accumulated powder.
• Use the previous
brush to clean the
recess, ensuring
that upper and
lower part of it is
well cleaned.
After having cleaned the dispenser and the
drawer recess, replace it.
Cleaning the drain filter
The filter permits to hold fluff or foreign...

The filter is inserted correctly when the
indicator on its top is visible and
blocked.
• close the filter cov-
er;
• insert the mains
plug again.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes
a long time to fill with water, the starting button
flashes red or the display (if available) shows
the relevant alarm (see chapter "What to do
if..." for more details), check if the water inlet
filters are blocked .
To clean the water inlet filters:
• Turn off the...

The light of button 6
flashes and the light
7.1 illuminates:
Problem with the wa-
ter supplyThe water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters (read "Cleaning the water inlet filters"
for more details).
The light of button 6
flashes and the light
7.2 illuminates:
Problem with the wa-
ter drainageThe drain hose is squashed or...

The light of button 6
flashes and the light
7.3 illuminates:
Door openThe door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops during
operation without any visible alarm.
Before contacting your local Service Centre,
please carry out the checks listed below.
MalfunctionPossible cause / Solution
The appliance does not
start:
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the...

MalfunctionPossible cause / Solution
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The appliance vibrates
noisily:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
• Adjust the feet.
The laundry is not evenly...

Mod. ... ... ...
Prod. No. ... ... ...
           Ser. No. ... ... ...
Mod. ..
. ... ...
Pr
od. No
.
 ... ... ..
  
   
    
  
  
  
     
 
   
 S
er
. N
o
. ... 
... 
...
Model description
(MOD.) ........................................
Product number
(PNC) .............................................
Serial number
(S.N.) .................................................
 27 www.zanussi.com
 

 www.zanussi.com/shop
   
192991972-A-082012