Zanussi Zwg 680 P User Manual

ENUser manual
Washing Machine
ZWG 680P
ZWG 6100P
 

Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _  4
Product description _ _ _ _ _ _ _ _ _ _ _ _ _  5
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Washing programmes _ _ _ _ _ _ _ _ _ _ _  18
Consumption values _ _ _ _ _ _ _ _ _ _ _ _  20
Care...

cur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
• This appliance is free standing only. DO
NOT build it in under a counter and DO NOT
remove the worktop for any reason.
• After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable against the wall.
• Install the appliance on a flat hard floor.
• Never place cardboard, wood or similar ma-
terials under the...

• Keep all detergents in a safe place out of
children’s reach.
• Make sure that children or pets do not climb
inside the drum. To prevent children and pets
becoming trapped inside the drum this appli-
ance incorporates a special feature.
To activate this de-
vice, rotate the button
(without pressing it)
inside the door clock-
wise until the groove
is horizontal. If neces-
sary use a coin.To disable this de-
vice and restore the
possibility of closing
the door, rotate the
button anti-clockwise
until the...

household waste disposal service or the shop
where you purchased the product.
Packaging materials
The materials marked with the symbol 
 are
recyclable.
>PEPSPP

Technical data
DimensionsWidth
Height
Depth60 cm
85 cm
54 cm
Electrical connectionInformation on the electrical connection is given on the rating plate, on
the inner edge of the appliance door.
Water supply pressureMinimum
Maximum0,05 MPa
0,8 MPa
Maximum LoadCotton6 kg
Spin SpeedMaximum800 rpm (ZWG 680P)
1000 rpm (ZWG 6100P)
Installation
Unpacking
Warning!
• Read carefully the "Safety information"
chapter before installing the appliance.
x 3
x 3
x 2x 1
B A
C
Warning! Remove and keep all
transit...

• Remove the polystyrene base from the bot-
tom.
• Return appliance
to it's upright posi-
tion.
• Open the door and
remove the plastic
hose guide, the
bag containing the
instruction booklet
and the plastic
plug caps from the
drum.
• Remove the power supply cable and the
draining and inlet hose from the hose hold-
ers on the rear of the appliance.
• Unscrew the three bolts and remove the
hose holders.
• Slide out the relevant plastic spacers.
Warning! Do
not remove
the drain hose
from the rear sup-...

Positioning and levelling
x 2
Level the appliance by raising or lowering the
feet.
The appliance MUST be level and stable on a
flat hard floor. If necessary, check the setting
with a spirit level. Any necessary adjustment
can be made with a spanner.
Accurate levelling prevents vibration, noise
and displacement of the appliance during op-
eration.
Repeat the levelling action, if the appliance is
not level and stable.
Water inlet
Connect the hose to
a tap with a 3/4”
thread.
35°
45°
Loosen the ring nut to...

Tie the plastic hose guide to the tap with a
string to prevent that the drain hose unhooks
when the appliance is emptying.
•Onto a sink outlet spigot.
Push the drain hose onto the spigot and se-
cure with a clip, ensure a loop is formed in
the drain hose to prevent waste from the sink
entering the appliance.
If the outlet spigot has not been used before,
remove any blanking plug that may be in
place.
•Directly into a drain pipe at a height of
not less than 60 cm and not more than
100 cm.
MAX 100cm
The...

Connections overview
~max.400 cm
min. 60 cm
max. 100 cm 0.5 bar (0.05 MPa)
8 bar (0.8 MPa)min. 
60 cm
max. 
100 cm
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agree with your domestic
power supply.
• Always use a correctly installed shockproof
socket.
• Do not use multi-way plugs, connectors and
extension cables. There is a risk of fire.
• Do not replace or modify the mains cable
yourself. Contact the After Sales Service.• Make...