Zanussi Zwg 680 P User Manual

							ENUser manual
Washing Machine
ZWG 680P
ZWG 6100P
 
						

							Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _  4
Product description _ _ _ _ _ _ _ _ _ _ _ _ _  5
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Washing programmes _ _ _ _ _ _ _ _ _ _ _  18
Consumption values _ _ _ _ _ _ _ _ _ _ _ _  20
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _  21
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  23
Subject to change without notice.
 Safety information
Important! Read carefully and keep for future
reference.
• The safety of your appliance complies with
the industry standards and with legal require-
ments on the safety of appliances. However,
as manufacturers, we feel it is our duty to
provide the following safety notes.
• It is most important that this instruction book
should be retained with the appliance for fu-
ture reference. Should the appliance be sold
or transferred to another owner, or should
you move house and leave the appliance, al-
ways ensure that the book is supplied with
the appliance in order that the new owner
can get to know the functioning of the appli-
ance and the relevant warnings.
• You MUST read them carefully before instal-
ling or using the appliance.
• Before first starting up, check the appliance
for any damage incurred during transport.
Never connect up a damaged appliance . If
parts are damaged, contact your supplier.
• If the appliance is delivered in the winter
months when there are minus temperatures.
Store it at room temperature for 24 hours be-
fore using for the first time.
• This appliance is made for use in a normal
domestic situation. The manufacturer is not
responsible for freezing damages. Read
"Frost precaution".
General safety
• It is dangerous to alter the specifications or
attempt to modify this product in any way.• During high temperature wash programmes
the door glass may get hot. Do not touch it!
• Make sure that small children and pets do
not climb into the drum. To avoid this, please
check inside the drum before using.
• Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp ma-
terial can cause extensive damage and must
not be placed into the appliance.
• Only use the advised quantities of fabric
softener and detergent. Damage to the fabric
can ensue if you over-fill. Refer to the manu-
facturer’s recommendations of quantities.
• Wash small items such as socks, laces,
washable belts etc in a washing bag or pil-
low case as it is possible for such items to
slip down between the tub and the inner
drum.
• Do not use your appliance to wash articles
with whalebones, material without hems or
torn material.
• Always unplug the appliance and turn off the
water supply after use, cleaning and mainte-
nance.
• Under no circumstances should you attempt
to repair the appliance yourself. Repairs car-
ried out by inexperienced people may cause
injury or serious malfunctioning. Contact your
local Service Centre. Always insist on genu-
ine spare parts.
Installation
• This appliance is heavy. Care should be tak-
en when moving it.
• All packing and transit bolts must be re-
moved before use. Serious damage can oc-
2
 
www.zanussi.com
 
						

							cur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
• This appliance is free standing only. DO
NOT build it in under a counter and DO NOT
remove the worktop for any reason.
• After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable against the wall.
• Install the appliance on a flat hard floor.
• Never place cardboard, wood or similar ma-
terials under the appliance to compensate for
any unevenness in the floor.
• If the appliance is situated on a carpeted
floor, please adjust the feet in order to allow
air to circulate freely under the appliance.
• Check that the appliance does not touch the
wall or other kitchen units.
•This appliance must be connected to a
cold water supply.
• Do not use the hose from your previous ap-
pliance to connect to water supply. Always
use the hose supplied with the appliance.
• The inlet hose must not be lengthened. If it is
too short and you do not wish to move the
tap, you will have to purchase a new, longer
hose specially designed for this type of use.
• Always be sure, that there is no water leak-
age from hoses and their connections after
the installation.
• If the appliance is installed in a location sub-
ject to frost, please read the “Frost precau-
tion” chapter. Manufacturer decline any re-
sponsibility for freezing damages.
• Any plumbing work required to install this ap-
pliance should be carried out by a qualified
plumber or competent person.
• Any electrical work required to install this ap-
pliance should be carried out by a qualified
electrician or competent person.
Use
• This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.• Only wash fabrics which are designed to be
machine washed. Follow the instructions on
each garment label.
• Do not overload the appliance. See the
"Washing Programme Chart".
• Before washing, ensure that all pockets are
empty and buttons and zips are fastened.
Avoid washing frayed or torn articles and
treat stains such as paint, ink, rust, and grass
before washing. Underwired bras must NOT
be machine washed.
• The detergent dispenser drawer is provided
with an insert for liquid detergent. Do not use
the insert downwards for gelatinous deter-
gents, with programmes including prewash,
with the delay start option. In all these cases
you can use metering balls or sachets provi-
ded with the detergent, Take out the meter-
ing aid at the end of the washing cycle.
• Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensure that
the fluid is removed from the garment before
placing in the appliance.
• Never pull the power supply cable to remove
the plug from the socket; always take hold of
the plug itself.
• Never use the appliance if the power supply
cable, the control panel, the working surface
or the base are damaged so that the inside
of the appliance is accessible.
Child safety
• This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal sensory or mental capabilities or lack of
experience and knowledge unless they have
been given supervision or instruction con-
cerning use of the appliance by a person re-
sponsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children -
danger of suffocation! Keep them out of chil-
dren’s reach.
 3 www.zanussi.com
 
						

							• Keep all detergents in a safe place out of
children’s reach.
• Make sure that children or pets do not climb
inside the drum. To prevent children and pets
becoming trapped inside the drum this appli-
ance incorporates a special feature.
To activate this de-
vice, rotate the button
(without pressing it)
inside the door clock-
wise until the groove
is horizontal. If neces-
sary use a coin.To disable this de-
vice and restore the
possibility of closing
the door, rotate the
button anti-clockwise
until the groove is
vertical.
Frost precaution
If the appliance is installed in a place where the
temperature could drop below 0°C, proceed as
follows to remove any water remaining inside
the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the tap;
4. unscrew the drain hose from the rear sup-
port and unhook it from sink or spigot;
5. place a bowl on the floor;6. let the drain hose run along the floor, place
the external extremities of the drain and in-
let hoses in the bowl placed on the floor
and let water drain out completely;
7. screw the water inlet hose to the tap and
the drain hose to the rear of the appliance
again;
When you intend to start the appliance up
again, make sure that the room temperature is
above 0°C.
Environment concerns
The symbol  on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this productis disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
4
 
www.zanussi.com
 
						

							household waste disposal service or the shop
where you purchased the product.
Packaging materials
The materials marked with the symbol 
 are
recyclable.
>PEPSPP
						

							Technical data
DimensionsWidth
Height
Depth60 cm
85 cm
54 cm
Electrical connectionInformation on the electrical connection is given on the rating plate, on
the inner edge of the appliance door.
Water supply pressureMinimum
Maximum0,05 MPa
0,8 MPa
Maximum LoadCotton6 kg
Spin SpeedMaximum800 rpm (ZWG 680P)
1000 rpm (ZWG 6100P)
Installation
Unpacking
Warning!
• Read carefully the "Safety information"
chapter before installing the appliance.
x 3
x 3
x 2x 1
B A
C
Warning! Remove and keep all
transit devices so that they can be re-
fitted if the appliance ever has to be transpor-
ted again.
Necessary tools
10 mm
30 mm
• Remove the exter-
nal film. Use a cut-
ter, if necessary.
• Remove the cardboard top.
• Remove the polystyrene packaging materi-
als.
2 1
• Spread the front
piece on the floor
behind the appli-
ance and then lay
the appliance care-
fully rear side down
on it. Make sure
that no hoses are
crushed in the
process.
6
 
www.zanussi.com
 
						

							• Remove the polystyrene base from the bot-
tom.
• Return appliance
to it's upright posi-
tion.
• Open the door and
remove the plastic
hose guide, the
bag containing the
instruction booklet
and the plastic
plug caps from the
drum.
• Remove the power supply cable and the
draining and inlet hose from the hose hold-
ers on the rear of the appliance.
• Unscrew the three bolts and remove the
hose holders.
• Slide out the relevant plastic spacers.
Warning! Do
not remove
the drain hose
from the rear sup-
port. Remove this
hose only if it is
necessary to drain
the water. Refer to
"Frost precaution"
and "What to do if".
 
• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
 7 www.zanussi.com
 
						

							Positioning and levelling
x 2
Level the appliance by raising or lowering the
feet.
The appliance MUST be level and stable on a
flat hard floor. If necessary, check the setting
with a spirit level. Any necessary adjustment
can be made with a spanner.
Accurate levelling prevents vibration, noise
and displacement of the appliance during op-
eration.
Repeat the levelling action, if the appliance is
not level and stable.
Water inlet
Connect the hose to
a tap with a 3/4”
thread.
35°
45°
Loosen the ring nut to angle the hose to the
left or right depending on the position of your
water tap. Do not place the inlet hose
downwards. After positioning the inlet hose,
be sure to tighten the ring nut again to pre-
vent leaks.
Water drainage
Firstly form a hook in the end of the drain
hose using the plastic hose guide supplied
with the appliance .
The end of the drain hose can be positioned
in four ways:
•Hooked over the edge of a sink using
the plastic hose guide.
8
 
www.zanussi.com
 
						

							Tie the plastic hose guide to the tap with a
string to prevent that the drain hose unhooks
when the appliance is emptying.
•Onto a sink outlet spigot.
Push the drain hose onto the spigot and se-
cure with a clip, ensure a loop is formed in
the drain hose to prevent waste from the sink
entering the appliance.
If the outlet spigot has not been used before,
remove any blanking plug that may be in
place.
•Directly into a drain pipe at a height of
not less than 60 cm and not more than
100 cm.
MAX 100cm
The end of the drain
hose must always be
ventilated, i.e. the
inside diameter of the
drain pipe must be
larger than the out-
side diameter of the
drain hose. The drain
hose must not be
kinked.
•Directly to a built-in drain pipe in the
room wall.
The drain hose may be extended to a maxi-
mum of 4 metres. An additional drain hose
and joining piece is available from your Local
Centre.
 9 www.zanussi.com
 
						

							Connections overview
~max.400 cm
min. 60 cm
max. 100 cm 0.5 bar (0.05 MPa)
8 bar (0.8 MPa)min. 
60 cm
max. 
100 cm
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agree with your domestic
power supply.
• Always use a correctly installed shockproof
socket.
• Do not use multi-way plugs, connectors and
extension cables. There is a risk of fire.
• Do not replace or modify the mains cable
yourself. Contact the After Sales Service.• Make sure that the mains plug and cable is
not squashed or damaged by the back of the
appliance.
• Make sure that the mains plug is accessible
after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• This appliance complies with the E.E.C. Di-
rectives.
First use
• Ensure that the electrical and water
connections comply with the installation
instructions.
• Ensure that the drum is empty.
• Before the first wash, run a cotton cycle
at the highest temperature without anylaundry in the machine, to remove any
manufacturing residue from the drum
and tub. Pour 1/2 a measure of deter-
gent into the main wash compartment
and start the machine.
Daily use
Sort out the laundry
Follow the wash code symbols on each gar-
ment label and the manufacturer’s washing in-structions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woollens.
10
 
www.zanussi.com