Home > Zanussi > Washing Machine > Zanussi Fcs 825 C User Manual

Zanussi Fcs 825 C User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Zanussi Fcs 825 C User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 276 Zanussi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ENUser manual 2
    RUИнструкция по
    эксплуатации21
    Washing Machine
    Стиральная машина
    FCS 825 C
     
    						
    							Contents
    Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
    Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  3
    Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
    Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
    Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
    Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
    Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  11Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  12
    What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  13
    Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  16
    Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  16
    Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   17
    Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  20
    Subject to change without notice
     Safety information
    Important! Read carefully & keep for future reference.
    • The safety of Your appliance complies with the industry
    standards and with legal requirements on the safety of
    appliances. However, as manufacturers, we feel it is
    our duty to provide the following safety notes.
    • It is most important that this instruction book should
    be retained with the appliance for future reference.
    Should the appliance be sold or transferred to another
    owner, or should you move house and leave the appli-
    ance, always ensure that the book is supplied with the
    appliance in order that the new owner can get to know
    the functioning of the appliance and the relevant warn-
    ings.
    • You MUST read them carefully before installing or us-
    ing the appliance.
    • Before first starting up, check the appliance for any
    damage incurred during transport. Never connect up a
    damaged appliance . If parts are damaged, contact your
    supplier.
    • If the appliance is delivered in the winter months when
    there are minus temperatures. Store it at room temper-
    ature for 24 hours before using for the first time.
    General safety
    • It is dangerous to alter the specifications or attempt to
    modify this product in any way.
    • During high temperature wash programmes the door
    glass may get hot. Do not touch it!
    • Make sure that small pets and children do not climb
    into the drum. To avoid this, please check into the
    drum before using.
    • Any objects such as coins, safety pins, nails, screws,
    stones or any other hard, sharp material can cause ex-
    tensive damage and must not be placed into the ma-
    chine.
    • Only use the advised quantities of fabric softener and
    detergent. Damage to the fabric can ensue if you over-
    fill. Refer to the manufacturer’s recommendations of
    quantities.
    • Wash small items such as socks, laces, washable belts
    etc in a washing bag or pillow case as it is possible for
    such items to slip down between the tub and the inner
    drum.
    • Do not use your washing machine to wash articles with
    whalebones, material without hems or torn material.
    • Always unplug the appliance and turn off the water
    supply after use, cleaning and maintenance.
    • Under no circumstances should you attempt to repair
    the machine yourself. Repairs carried out by inexper-
    ienced people may cause injury or serious malfunc-
    tioning. Contact your local Service Centre. Always in-
    sist on genuine spare parts.
    Installation
    • This appliance is heavy. Care should be taken when
    moving it.
    • When unpacking the appliance, check that it is not
    damaged. If in doubt, do not use it and contact the
    Service Centre.
    • All packing and transit bolts must be removed before
    use. Serious damage can occur to the product and to
    property if this is not adhered to. See relevant section
    in the user manual.
    • After having installed the appliance, check that it is not
    standing on the inlet and drain hose and the worktop is
    not pressing the electrical supply cable against the
    wall.
    2
     
     
    						
    							• If the machine is situated on a carpeted floor, please
    adjust the feet in order to allow air to circulate freely
    under the appliance.
    • Always be sure, that there is no water leakage from ho-
    ses and their connections after the installation.
    • If the appliance is installed in a location subject to
    frost, please read the “dangers of freezing” chapter.
    • Any plumbing work required to install this appliance
    should be carried out by a qualified plumber or compe-
    tent person.
    • Any electrical work required to install this appliance
    should be carried out by a qualified electrician or com-
    petent person.
    Use
    • This appliance is designed for domestic use. It must
    not be used for purposes other than those for which it
    was designed.
    • Only wash fabrics which are designed to be machine
    washed. Follow the instructions on each garment label.
    • Do not overload the appliance. See the Washing Pro-
    gramme Table.
    • Before washing, ensure that all pockets are empty and
    buttons and zips are fastened. Avoid washing frayed or
    torn articles and treat stains such as paint, ink, rust,
    and grass before washing. Underwired bras must NOT
    be machine washed.
    • Garments which have been in contact with volatile pe-
    troleum products should not be machine washed. If
    volatile cleaning fluids are used, care should be taken
    to ensure that the fluid is removed from the garment
    before placing in the machine.
    • Never pull the power supply cable to remove the plug
    from the socket; always take hold of the plug itself.
    • Never use the appliance if the power supply cable, the
    control panel, the working surface or the base are dam-
    aged so that the inside of the washing machine is ac-
    cessible.
    Child safety
    • This appliance is not intended for use by person (in-
    cluding children) with reduced physical sensory or
    mental capabilities or lack of experience and knowl-
    edge unless they have been given supervision or in-
    struction concerning use of the appliance by a person
    responsible for their safety.
    • Young children should be supervised to ensure that
    they do not play with the appliance
    • The packaging components (e.g. plastic film, polystyr-
    ene) can be dangerous to children - danger of suffoca-
    tion! Keep them out of children’s reach.
    • Keep all detergents in a safe place out of children’s
    reach.
    • Make sure that children or pets do not climb into the
    drum.
    Product description
    Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and
    detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so
    saving energy.
     3
     
    						
    							Machine front
    1
    2
    3
    4
    1Detergent dispenser drawer
    2Control panel
    3Door opening handle
    4Adjustable feet (front)
    Machine rear
    1
    3
    2
    4
    1Transit locking devices
    2Drain hose
    3Electrical lead
    4Inlet hose
    Detergent dispenser drawer
     Compartment for powder or liquid detergent used for
    main wash. If using liquid detergent pour it just before
    starting the programme.
     Compartment for liquid additives (fabric softener,
    starch).
    Any fabric softener or starching additives must be poured
    into the compartment before starting the wash pro-
    gramme.
    4
     
     
    						
    							Control panel
    123456879
    Henceforth, the programme selector dial, the spin selector dial, programme progress lights and different buttons
    will be indicated in all the book with the relevant numbers given in this table.
    1Detergent drawer• Detergent drawer has 2 separate compartments for detergent and fabric
    conditioner.
    Prewash detergent is to be added straight into the drum.
    2Option button:
    Quick 
    Daily 
    • By means of this button, you can select only one of the options.
    • The relevant light will light up.
    3Economy button • By means of this button, the machine performs an energy saving cycle.
    • The relevant light will light up.
    4Prewash button • By means of this button, the machine performs a prewash cycle before the
    main wash phase.
    • The relevant light will light up.
    5Easy iron button • By means of this button, the laundry is gently washed and spun.
    • The relevant light will light up.
    6Start/Pause button • This button allows to start the selected programme; the corresponding in-
    dicator light is lit.
    • This button interrupts also a programme which is running, the corre-
    sponding indicator light starts to flash.
    7Programme progress display• The different pilot lights illuminate depending on the running programme
    phase.
    8Spin speed selector• The spin speed selector dial allows for changing the spin speed. Turn the
    spin selector, if you want your laundry to be spun at a speed different from
    the one proposed by the appliance or select «Rinse Hold» or No spin
    option.
     5
     
    						
    							9Programme selector dial and
    ON/OFF switch• The programme selector dial allows to select a programme and/or to reset,
    cancel the programme, switch the machine on/off.
    • Programme selector dial is divided into following sections: Cotton, Syn-
    thetic, Delicate, Wool, Special programmes. It can be turned either clock-
    wise or anticlockwise.
    Table of Symbols
    = Quick= Washing= No Spin
    = Daily= Rinses= Drain
    = Economy= Spin= Cold wash
    =Prewash= Cycle End= Wool
    = Easy iron= Door Locked= Hand wash
    = Start/Pause= Rinse Hold= ON/OFF
    Functions
    Options (button 2 )
    Quick
    Short programme for lightly soiled white-/coloured and
    synthetic laundry. The washing time will be reduced ap-
    prox. 10 minutes. Max. recommended temperature 60°C.
    Daily
    Short programme for normally soiled cotton, synthetic or
    delicate items. The washing time will be reduced accord-
    ing to the type of fabric and the selected temperature.
    This options can not be chosen together with the
    programme 60E and neither with the wool, delicate
    or hand wash programmes. The washing time will be re-
    duced depending on the type of material and the selected
    temperature. Recommended load for cotton is 2 kg.
    Economy (button 
    3 )
    Only for cottons and synthetic items lightly or normally
    soiled at a temperature of 40 °C or higher. The washing
    time will be prolonged and the washing temperature will
    be reduced. You can use this option if you want to wash
    normally soiled laundry and at the same time save energy.
    Prewash (button 
    4 )
    If the laundry is heavily soiled, you can choose a pro-
    gramme with prewash. Before the main wash the machine
    runs a prewash up to 30° C. The washing time will be
    prolonged approx. 20 minutes. The prewash ends with a
    short spin in the programmes for cotton and synthetic
    laundry. In the programme for delicate laundry the water is
    only drained. The prewash option is not available for the
    wool programme.
    Easy iron (button 
    5 )
    Selecting this button, the laundry is gently washed and
    spun to avoid any creasing. In this way ironing is easier.
    Furthermore the machine will perform 6 rinses instead of
    3 for cotton and 4 rinses instead of 3 for synthetic.
    Rinse hold or No spin ( 
    8 )
    Rinse hold 
    By selecting this option the water of the last rinse is not
    emptied out to prevent the fabrics from creasing. When
    the programme has finished, the lights End and
    Locked are lit to indicate that the water must be emptied
    out (See:  At the end of the programme).
    No spin 
    By selecting this option all the spinning phases are exclu-
    ded. To be used for extremely delicate material. The ma-
    chine will add some additional rinses to the cotton and
    synthetic programmes.
    Programme progress display ( 
    7 )
    6
     
     
    						
    							(A)
    (B)
    (C)
    (D)
    (E)
    The light A illuminates when the machine is performing
    the washing phase.
    The light B illuminates when the machine is rinsing.
    The light C illuminates when the machine is spinning.
    The light D illuminates at the end of the washing cycle.
    The light E indicates if the door can be opened:
    • The light is lit: the door cannot be opened.
    • The light is out: the door can be opened.
    • The light is flashing: the door can soon be opened.
    Before first use
    Warning! 
    Ensure that the electrical and water connections comply
    with the installation instructions.
    Important! Remove any material from the drum.
    Important! We recommend you to run a wash programme
    without any load, to clear any residues which may havebeen left by the manufacturing process. Pour approx. 100
    ml of detergent straight into the drum and run a cotton
    cycle at 60°C. When the programme is finished the
    machine will be ready to use.
    Daily use
    Load the laundry
    Open the door by carefully pulling the door handle out-
    wards. Place the laundry in the drum, one item at a
    time, shaking them out as much as possible. Close the
    door.
    Measure out the detergent and the fabric softener
    Pull out the dispenser
    drawer until it stops.
    Measure out the amount of
    detergent required, pour it
    into the larger compart-
    ment on the left 
     .
    If required, pour fabric
    softener into the smaller
    compartment marked 
    (the amount used must not
    exceed the «MAX» mark
    in the drawer). Close the
    drawer gently.
    Select the required programme by means of the
    programme selector dial (9)
    Turn the programme selector dial to the required pro-
    gramme. The selector can be turned either clockwise or
    anticlockwise.
    The green light of button 6 starts to flash
     7
     
    						
    							On programme progress display the pilot lights corre-
    sponding to all phases composing the selected pro-
    gramme are lit.
    On position 
     the programme is reset and the machine
    is switched OFF.
    At the end of the programme the selector dial must be
    turned to position 
     to switch the machine off.
    Important! If you turn the programme selector dial to
    another programme when the machine is working, the
    lights in the programme progress display will start to flash
    to indicate a wrong selection. The machine will not
    perform the new selected programme.
    Select the spin speed, Rinse Hold or No spin option
    (8)
    Select the spin speed, Rinse Hold option or No Spin op-
    tion by turning the spin speed selector.
    For the maximum spin speed allowed by each pro-
    gramme, refer to the chapter Washing programmes.
    • The position 800 is equivalent to 800 rpm/min for the
    synthetic and wool programmes and 700 rpm/min for
    the delicate wash programme.
    • The position 400 is equivalent to 400 rpm/min for all
    the wash programmes.
    Select the desired option by means of buttons 2, 3,
    4 and 5
    Depending on the programme, different functions can be
    combined. These must be selected after choosing the de-
    sired programme and before pressing the button 6.The
    relevant light will illuminate.
    If an incorrect option is selected, the corresponding indi-
    cator lamp flashes for about 2 seconds. For the compati-
    bility of the options with the washing programmes, refer to
    the chapter «Washing programmes».
    Start the programme by pressing button 6
    To start the selected programme, press this button; the
    corresponding pilot light stops flashing and remains lit.
    On programme progress display the pilot lights A and E
    illuminate to indicate that the appliance starts operating
    and the door is locked.
    Altering an option or a running programme
    It is possible to change any option before the programme
    carries it out.
    Before you make any change, you must pause the washing
    machine by pressing the button 6.
    The programme can be changed as long as the button 6
    has not been pressed. Changing a running programme is
    possible only by resetting it. Turn the programme selector
    dial to 
     and then to the new programme position. Start
    the new programme by pressing the button 6 again.
    Interrupting a programme
    Press the button 6 to interrupt a programme which is run-
    ning, the corresponding light starts to flash. Press the
    button again to restart the programme.
    Cancelling a programme
    Turn the selector dial to  position to cancel a pro-
    gramme which is running. Now you can select a new pro-
    gramme.
    Opening the door after the programme has started
    First set the machine to pause by pressing the button 6.
    After some minutes, the door can be opened, when the
    following conditions are observed:
    • The water temperature is below 55°C.
    • The water level is below the bottom edge of the door.
    • The machine doesn’t spin.
    If you cannot open the door but it is absolutely necessary
    to open it you have to switch the machine off by turning
    the selector dial to 
     . After few minutes the door can be
    opened
    (Pay attention to the water level and temperature!).
    After this procedure, it will be necessary to set the pro-
    gramme and the options again and then press the button
    6.
    At the end of the programme
    The machine stops automatically.
    The pilot light D illuminates to indicate that the pro-
    gramme has finished. The pilot light E goes out, the door
    can be opened and the laundry can be removed.
    If at the end of a programme there is water in the tub
    (when Rinse hold option has been selected), to empty
    out the water follow the following instructions:
    8
     
     
    						
    							•
    turn the programme selector dial to 
    • select the «Drain» or «Spin» programme
    • press button 6
    When the pilot light E goes out, the door can be opened
    and the laundry can be removed.
    At the end of the cycle, turn the programme selector dial
    to 
     to switch the machine off.
    Remove the laundry from the drum and carefully check
    that the drum is empty. If you do not intend to carry out
    another wash, close the water tap.
    Leave the door open to prevent the formation of mildew
    and unpleasant smells.
    Helpful hints and tips
    Sorting out the laundry
    Follow the wash code symbols on each garment label and
    the manufacturer’s washing instructions. Sort the laundry
    as follows: whites, coloureds, synthetics, delicates, wool-
    lens.
    Temperatures
    95° or 90°
    for normally soiled white cottons
    and linen (e.g. tea cloths, towels, ta-
    blecloths, sheets...)
    60°/50°
    for normally soiled, colour fast gar-
    ments (e.g. shirts, night dresses,
    pyjamas....) in linen, cotton or syn-
    thetic fibres and for lightly soiled
    white cotton (e.g. underwear)
    40°-30°- Cold
    for delicate items (e.g. net curtains),
    mixed laundry including synthetic
    fibres and woollens bearing the la-
    bel «pure new wool, machine wash-
    able, non-shrink»
    Before loading the laundry
    Never wash whites and coloureds together. Whites may
    lose their «whiteness» in the wash.
    New coloured items may run in the first wash; they should
    therefore be washed separately the first time.
    Make sure that no metal objects are left in the laundry
    (e.g. hair clips, safety pins, pins).
    Button up pillowcases, close zip fasteners, hooks and
    poppers. Tie any belts or long tapes.
    Remove persistent stains before washing.
    Rub particularly soiled areas with a special detergent or
    detergent paste.
    Treat curtains with special care. Remove hooks or tie them
    up in a bag or net.
    Maximum loads
    Recommended loads are indicated in the washing pro-
    gramme charts.
    General rules:
    •Cotton, linen: drum full but not too tightly packed;
    •Synthetics: drum no more than half full;
    •Delicate fabrics and woollens: drum no more than one
    third full.
    Washing a maximum load makes the most efficient use of
    water and energy.
    For heavily soiled laundry, reduce the load size.
    Laundry weights
    The following weights are indicative:
    The following weights are indicative:
    bathrobe1200 g
    quilt cover700 g
    man’s work shirt600 g
    sheet, man’s pyjamas500 g
    tablecloth250 g
    pillow case, towelling towel, night
    dress, man’s shirt200 g
    tea cloth, ladies’ briefs, napkin,
    blouse, men’s underpants100 g
    Removing stains
    Stubborn stains may not be removed by just water and de-
    tergent. It is therefore advisable to treat them prior to
    washing.
    Blood: treat fresh stains with cold water. For dried stains,
    soak overnight in water with a special detergent then rub
    in the soap and water.
     9
     
    						
    							Oil based paint: moisten with benzine stain remover, lay
    the garment on a soft cloth and dab the stain; treat several
    times.
    Dried grease stains: moisten with turpentine, lay the gar-
    ment on a soft surface and dab the stain with the fingertips
    and a cotton cloth.
    Rust: oxalic acid dissolved in hot water or a rust removing
    product used cold. Be careful with rust stains which are
    not recent since the cellulose structure will already have
    been damaged and the fabric tends to hole.
    Mould stains: treat with bleach, rinse well (whites and fast
    coloureds only).
    Grass: soap lightly and treat with bleach (whites and fast
    coloureds only).
    Ball point pen and glue: moisten with acetone
    1), lay the
    garment on a soft cloth and dab the stain.
    Lipstick: moisten with acetone as above, then treat stains
    with methylated spirits. Treat any residual marks with
    bleach.
    Red wine: soak in water and detergent, rinse and treat with
    acetic or citric acid, then rinse. Treat any residual marks
    with bleach.
    Ink: depending on the type of ink, moisten the fabric first
    with acetone
    1), then with acetic acid; treat any residual
    marks on white fabrics with bleach and then rinse thor-
    oughly.
    Tar stains: first treat with stain remover, methylated spirits
    or benzine, then rub with detergent paste.
    Detergents and additives
    Good washing results also depend on the choice of deter-
    gent and use of the correct quantities to avoid waste and
    protect the environment.
    Although biodegradable, detergents contain substances
    which, in large quantities, can upset the delicate balance
    of nature.
    The choice of detergent will depend on the type of fabric
    (delicates, woollens, cottons, etc.), the colour, washing
    temperature and degree of soiling.
    All commonly available washing machine detergents may
    be used in this appliance:
    • powder detergents for all types of fabric
    • powder detergents for delicate fabrics (60°C max) and
    woollens
    • liquid detergents, preferably for low temperature wash
    programmes (60°C max) for all types of fabric, or spe-
    cial for woollens only.
    The detergent and any additives must be placed in the ap-
    propriate compartments of the dispenser drawer before
    starting the wash programme.
    Prewash detergent is to be added straight into the
    drum
    If using liquid detergents, a programme without prewash
    must be selected. Pour the liquid detergent into the deter-
    gent compartment immediately before you start the pro-
    gramme.
    Your appliance incorporates a recirculation system which
    allows an optimal use of the concentrated detergent.
    Follow the product manufacturer’s recommendations on
    quantities to use and do not exceed the «MAX» mark in
    the detergent dispenser drawer.
    Degrees of water hardness
    Water hardness is classified in so-called “degrees” of
    hardness. Information on hardness of the water in your
    area can be obtained from the relevant water supply com-
    pany, or from your local authority. If the water hardness
    degree is medium or high we suggest you to add a water
    softener following always the manufacturer’s instructions.
    When the degree of hardness is soft, readjust the quantity
    of the detergent.
    1) do not use acetone on artificial silk
    10
     
     
    						
    All Zanussi manuals Comments (0)

    Related Manuals for Zanussi Fcs 825 C User Manual