Yamaha Vs 10 Owners Manual

27
English REMOTE CONTROL
EFFECT
DSP
SETAV MUTE
TESTSUBWOOFER+SUBWOOFER–
NIGHT MODE
23 1
56 4
8
MENU
9 7
0
+ –ENTER
LAST
– VOL VOL +
VS10 TV VCR CBL
ON/OFF
CH
CH
MEMORY
1
2
4
3
TV VCR CBL
CH
23 1
56 4
89 7
0
REMOTE CONTROL
Enter the code surely. The transmission indicator goes
out when the code is set properly. (The code has not
been set properly if the indicator flashes and then goes
out.)
Refer to the list of manufacturer codes on page i (at the
end of this manual).
4Press p and check that the...

28

Precautions when performing
preset
The transmission indicator goes out once the manufacturer
code is set properly.
If the transmission indicator does not go out, or if it flashes
and then goes out, repeat the procedure from step 1.
Pay attention to the following points when you repeat the
preset procedure.
•Check the manufacturer code number.
•Check that the correct remote control selector button has
been selected when setting the manufacturer code.
•If more than one code is given for a manufacturer,...

29
English REMOTE CONTROL
EFFECT
DSP
SETAV MUTE
TESTSUBWOOFER+SUBWOOFER–
NIGHT MODE
23 1
56 4
8
MENU
9 7
0
+ –ENTER
LAST
– VOL VOL +
VS10 TV VCR CBL
ON/OFF
CH
CH
MEMORY
y
•A VCR can be controlled using * marked buttons once the
manufacturer code for that VCR has been set for the remote
control selector button “VCR”.
Records on the VCR* Plays the VCR* Fast forwards the VCR* Enters the channel Select the channel Selects TV  input Increases TV  volume Selects the next higher channel
Pauses the VCR*Stops the...

30
EFFECT
DSP
SETAV MUTE
TESTSUBWOOFER+SUBWOOFER–
NIGHT MODE
23 1
56 4
8
MENU
9 7
0
+ –ENTER
LAST
– VOL VOL +
VS10 TV VCR CBL
ON/OFF
CH
CH
MEMORY
y
•A TV can be controlled using * marked buttons once the
manufacturer code for that TV has been set for the remote control
select button “TV”.
Records
This button needs to be pressed twice in the
case of some models for the VCR to begin a
recording. Plays Fast forwards Select the channel Selects TV  input* Increases TV  volume* Selects the next higher channel...

31
English APPENDIX
APPENDIX

Encode/Decode
When a signal or other information is processed,
compressed and digitized, this is called encoding. Encoding
can be used to record an extremely large amount of
information on a single CD or DVD.
An encoded signal cannot be listened to directly. It must be
returned to its original state (i.e. audible sound) and this is
called decoding.

Sound field
Not all sound travels from the sound source directly into the
human ear, but instead reflects off of walls,...

32
Cannot control other
component.
Movie dialog and other audio
is difficult to hear.
A “humming” noise is present.
—
There is noise in the tuner or
TV and the video image is
unstable.
•Is the remote control selector button corresponding to the component to
be controlled pressed? •Is the manufacturer code set correctly? •Is a tuner or TV that uses an indoor antenna located near the unit?
Use of an outdoor antenna is recommended.
The remote control does not
function properly.
•Is the remote control...

33
English APPENDIX
General
Power Supply
[Europe and U.K. models] ................................ AC 230 V, 50 Hz
[U.S.A. and Canada models] ............................ AC 120 V, 60 Hz
[Australia model] .............................................. AC 240 V, 50 Hz
Power Consumption ................................................................. 60 W
Power Consumption (standby mode) ...................................... 5.5 W
Dimensions (W x H x D)
Control center...

34
M
Manufacturer codes ................... i (at the end of this manual)
Memory ............................................................................. 20
Menu functions .................................................................. 24
Muting the audio ............................................................... 19
N
Naming the input terminals ............................................... 25
NIGHT MODE .................................................................. 19
S
Selecting a...

i
LIST OF MANUFACTURERÕS CODES
LISTES DES CODES FABRICANT
LISTA DE CîDIGOS DE FABRICANTES
TV
A-MARK 1161
A TANDY 0941
ABEX 1151
ADMIRA 1141
ADVENTURA 1131
AIKO 1121
AIWA 1451
AKAI 0331, 1101,1111
ALBA 0431
ALLERON 1091
AMBASSADOR 1081
AMSTRAD 0481, 1081
ANAM 0251, 1041, 1051,
1061, 1071
ANAM NATIONAL 1041
AOC 0361, 1021, 1031
1111, 1161
ARCHER 1161
AUDIOSONIC 1001
AUDIOVOX 1051, 1161
BAUER 0441
BAUR 1001
BEIJING 1511, 1551, 1561
BELCOR 1031
BELL & HOWELL 0981, 0991
BEON 1001
BRADFORD 1051
BROCKWOOD 1031...

ii
SEARS 0101, 0161, 0171,
0351, 0451, 0521,
0621, 0761, 0801,
0861, 0971, 0981,
1091
SHANGHAI 1561, 1681
SHARP 0461, 0471, 0541,
0661, 0911, 0941,
1141
SHOGUN 1031
SIGNATURE 0991, 1771
SIMPSON 0581, 0961
SOLAVOX 1151
SONOKO 1001
SONTEC 1001
SONY 0371, 0451, 0661,
0841, 0951, 1281,
1441
SOUNDESIGN 0861, 0961, 1051,
1091
SOUNDWAVE 1001
SPECTRICON 1161
SQUAREVIEW 0481
SSS 1031, 1051
STAR-LITE 1051
SUPREX 0951
SUPRE-MACY 1131
SURPA 0351, 0971
SYLVANIA 0101, 0361, 0441,
0581, 0591, 0601,
0611, 0631, 0961,...