Yamaha Vs 10 Owners Manual

7
English
PREPARATION
INSTALLATION
Depending on room conditions, the control center can be installed vertically or horizontally.
Precautions before installation
•Do not touch the adhesive surface after peeling off the pad as this will weaken its adhesive strength.
•Thoroughly wipe clean the surface where the pad is to be applied. Note that adhesive strength is weakened if the surface is
dusty, oily or wet.
Installing the Control Center Horizontally
Apply the four supplied bottom pads to the bottom of the...

8
Note
•Using only the supporting stand makes the control center unstable and the front door cannot open. Be sure to use the side pads as well.
CAUTIONS
•Be sure to place the control center with the left side down.
•When installing the control center vertically on a high place such as on a shelf, do not place close to the edge.
Installing the Control Center Vertically
Apply the two supplied side pads to the side of the control center and attach to the supplied supporting stand.
1Peel off the seals of the...

9
English
PREPARATION
NATURAL SOUND HOME THEATER SYSTEM VS-10DIGITALDIGITALDOLBYSURROUND
CONNECTIONS
CAUTION
Always be sure to turn off the power of the control center and any component to be connected when making connections.
To ensure proper connections
•Connect the white plug of the connection cord to the left “L” (white) audio signal terminal and connect the red plug to the
right “R” (red) terminal.
•Insert the plug securely. If the plug is not inserted securely, noise may result or sound may not be...

10
DIGITAL 1
(V/PCM)VIDEO 1 TV
VIDEO SIGNAL
INPUT
MAIN SPEAKERS
SUBWOOFEROUT MONITOR
OUTSYSTEM
CONNECTORMARK
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M
+–+–
RL
OUTPUT INPUT
AUDIO/VIDEO 
IN AUDIO/VIDEO 
OUT
RL
AUDIO 
IN R
VIDEO IN VIDEO OUT
AUDIO 
IN LR
L
AUDIO 
OUT RAUDIO 
OUT L
Connect the audio output terminals on the TV (monitor) to the TV audio input terminals on the control center using the
supplied audio connection cord and the video input terminal on the TV (monitor) to the MONITOR...

11
English
PREPARATION
DIGITAL 1
(V/PCM)VIDEO 1 TV
VIDEO SIGNAL
INPUT
MAIN SPEAKERS
SUBWOOFEROUT MONITOR
OUT
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M
+– –
RLOUTPUTOPTICAL DIGITAL 
OUTPUT 
OUTPUT OUTPUT
RL
RL
VIDEO INVIDEO IN
VIDEO OUT
AUDIO 
OUT RAUDIO 
OUT LVIDEO 
OUT AUDIO IN L AUDIO IN R
Connect the optical digital output terminal on the DVD player, etc. to the DIGITAL 1 (optical) digital input terminal on the
control center using a commercially available optical fiber cable. This...

12
POWER
STANDBY
PHONESSILENT
DIGITAL2 VIDEO2
RL
OUTPUTOUTPUTOUTPUTOPTICAL DIGITAL
OUTPUT
AUDIO 
OUT R AUDIO 
OUT L RL
AUDIO 
IN L L
VIDEO OUT
VIDEO IN
VIDEO OUT
VIDEO INAUDIO 
IN R R
When connecting the video game player, DVD player, etc. with a optical digital output terminal, connect the optical digital
output terminal to the DIGITAL 2 (optical) digital input terminal on the control center using a commercially available optical
fiber cable. This allows you to enjoy a digital sound.
When connecting the...

13
English
PREPARATION
DIGITAL 1
(V/PCM)VIDEO 1 TV
VIDEO SIGNAL
INPUT
MAIN SPEAKERS
SUBWOOFEROUT MONITOR
OUTSYSTEM
CONNECTORMARK
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M+–+–
AC OUTLET0.8A MAX. 120V
60Hz 100W MAX.
UNSWITCED
+
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M
–+–12
3
MAIN SPEAKERS
CAUTIONS
•Do not let the bare speaker wire touch each other and do not let them touch any metal part of the speakers. This could
damage the speakers.
•Do not mistakenly connect positive (+)...

14
DIGITAL 1
(V/PCM)VIDEO 1 TV
VIDEO SIGNAL
INPUT
MAIN SPEAKERS
SUBWOOFEROUT MONITOR
OUTSYSTEM
CONNECTORMARK
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M
+–+–
0.8A MAX. 120V
60Hz 100W MAX.UNSWITCHED
AC OUTLET
Once all connections have been made, check them one more
time. Finally, insert the plug of the power supply cord for
the control center into an AC outlet. Disconnect the power
supply cord if you will not use the unit for an extended
period.

AC OUTLET (UNSWITCHED)
(Except for Australia...

15
English
PREPARATION
EFFECT
DSP
SETAV MUTE
TESTSUBWOOFER+SUBWOOFER–
NIGHT MODE
23 1
56 4
8
MENU
9 7
0
+ –ENTER
LAST
– VOL VOL +
VS10 TV VCR CBL
ON/OFF
CH
CH
MEMORY
1
2
RIGHT CENTER LEFT
RIGHT
SURROUND LEFT
SURROUND
RIGHT LEFT
RIGHT
SURROUND LEFT
SURROUND
Rear speakers Main
speaker
When the NX-SW10 is connected:
(Virtual) (Virtual)
2Press TEST.
A test tone (like pink noise) will be output in the
following order.
When only the VS-10 is connected or the
VIRTUAL SURROUND is selected:
1Press p to turn on...

16
3Adjust the level of the test tone using VOL +/–.
(Adjust to your listening level.)
Pressing VOL + increases the level, while pressing
VOL – decreases the level.
4Adjust the sound output level of each speaker
while listening to the test tone.
Pressing f increases the level, while pressing w
decreases the level.
y
•When only the VS-10 is connected:
Adjust the sound output levels of the rear virtual speakers and the
main speakers so that they become almost the same.
•When the NX-SW10 is connected:...