Yamaha Vs 10 Owners Manual

17
English
OPERATION
•When the STANDBY indicator lights or flashes, the
power can be turned on using p on the remote
control. The power also can be turned on by pressing
the INPUT selector button on the control center.
•The VS-10 memorizes the last state when the power
is turned off. If you turn off the power using
POWER on the control center in standby mode
(when the STANDBY indicator lights), the unit
enters standby mode when you press POWER on the
control center next time.
If you turn off the power...

18
CAUTION
The variable sound intensity range is large when playing
back a CD or MD. So, if the source that includes the
sudden change from a small sound level to large one is
played back at a maximum volume for a long time, the
speakers may be damaged.
Switching the input mode
This function allows you to switch the input mode of the
component connected to the DIGITAL 1 or DIGITAL 2
terminal to “Auto Mode” or “dts Fix”.
Auto Mode : This recognizes the PCM signal such as a CD,
Dolby digital signal or DTS...

19
English
OPERATION
ÅEnhancing the bass tones
Press t.
•The TRUBASS* indicator lights in the display.
•This function enhances the bass tones by increasing
the level of the low-range frequencies. When the
SW-VS10 is connected, the bass tones of the
subwoofer are also enhanced.
To cancel TRUBASS mode, press t again.
Notes
•The TRUBASS mode does not function when the headphones are
connected.
•If a thudding noise is heard from the subwoofer when this
function is turned on, lower the subwoofer level....

20
‰Calling Up Your Favorite Settings
Each MEMORY 1, 2 or 3 button can memorize the
current input and the settings of DSP mode,
SUBWOOFER level, TRUBASS and NIGHT MODE.
Once the settings are preset, you can call up each
MEMORY 1, 2 or 3 button anytime by simply pressing
one of the MEMORY buttons.
Memorizing the settings to each MEMORY 1, 2
or 3 button
Press and hold the MEMORY 1, 2 or 3 button to be
memorized for about 3 seconds.
The number of button you pressed is displayed after
“Memory” and the...

21
English
OPERATION
4 GAME
3 DIGITAL MOVIE THEATER
(input source: Dolby Digital)
70mm MOVIE THEATER
(input source: Dolby Surround)
DTS MOVIE THEATER
(input source: DTS)
2 DOLBY DIGITAL (input source: Dolby Digital)
DOLBY PRO LOGIC (input source: Dolby Surround)
DTS (input source: DTS)
1 VIRTUAL SURROUND
(input source: Dolby Digital, Dolby Surround or DTS)
1 VIRTUAL SURROUND
(input source: Dolby Digital, Dolby Surround or DTS)
This program reproduces the rich and full sound found in a
movie theater using...

22
7 MONO MOVIE
Each time this button is pressed, the DSP program is
selected in the following order and the currently
selected DSP program name is displayed.
When the VS-10 is connected without the
YAMAHA NX-SW10:When the VS-10 and the YAMAHA NX-SW10 are
connected:
* The “EFFECT OFF” appears only when using the DSP selector
button on the control center.
When the headphones are connected:
POWERSTANDBY
PHONESINPUT
SILENTDIGITAL2 VIDEO2DSPVOLUME
EFFECT
DSP
SETAV MUTE
23 1
– VOL VOL +
VS10 TV VCR CBL...

23
English
OPERATION
Notes
•Be sure to select the DSP program best suited for the atmosphere
of the source being listened to.
•The last selected DSP program for each input source (VIDEO 1,
TV, VIDEO 2, DIGITAL 1 and DIGITAL 2) is stored in memory.
So, when the input source is changed, the DSP program is
automatically changed to the last selected one correspondingly.

To cancel sound field effects
(using the remote control)
Press EFFECT ON/OFF.
The normal stereo playback is performed and
“EFFECT OFF” is...

24
Setting Auto Power On/Off
The Auto Power function works as described below.
No signal is input and no button is operated for about 30
minutes.
@
The unit enters the Auto Power Off mode.
(The STANDBY indicator flashes slowly.)
@
The unit enters the Auto Power On mode and the power
is turned on automatically when the signal is input*.
(or the power is turned on with p on the remote control
or INPUT selector button on the control center.)
* If the power is turned off and on using POWER on the control...

25
English
OPERATION
Naming the Input Terminals
It is possible to give names to the VIDEO 2, DIGITAL 1
and DIGITAL 2 input terminals. (It is not possible to change
the input names for the TV or VIDEO 1 input terminals.)
Once you select a name so that you can easily find out
which component is connected to the terminal, it is
convenient when you select an input source. For example, if
a video game player is connected to the VIDEO 2, you can
name that source “GAME”, or if a DVD player is connected
to the...

26
Adjusting the Delay Time
When the selected DSP program is VIRTUAL
SURROUND, DOLBY DIGITAL/DOLBY PRO LOGIC/
DTS or SILENT CINEMA, it is possible to adjust the delay
time. The delay time is that time difference between when
the sound from the main speakers can be heard and the
surround sound can be heard.
The larger the value, the later the sound field effect is
generated.
1Press MENU to display “Delay Time”.
2Press MENU + or – to adjust the delay time.
y
•Adjustable range
–For Dolby Digital (except for...