Yamaha Tyros 3 Service Manual

							111 Tyros3
 INITIAL SETTING
  In case of NG
Supplement:
TG1 indicates Effect RAM of SWP51B Master (DM: IC505) 
and TG2 indicates Effect RAM of SWP51B Slave (DM: IC506).
Test 57 to 62
Factory Inspection only.
Test 63
Function: Factory Set
Description:
Restores the Tyros 3 to the factory initial setup. 
(Sets the initial data to the Flash ROM.)
Displayed Message:
 Selected screen
During execution
Supplement:
In this stage, the fl ag for initialization is raised only and 
initialization will be executed when the power is turned on 
next time.
 Caution
Dont turn off the power until the main screen is indicated 
after executing the Factory Set.
Test 64
Function: Exiting test mode
Description:
Quits the test mode and restarts. (Restarting should be 
conducted automatically. Check if the restarting is conducted.)
Displayed Message:
Selected screen
Supplement:
 Caution
Dont turn off the power until the main screen is indicated 
after executing the Exiting test mode.
5542Cyy742:
)
y#
)y#
Error IndicationsCircuit 
BoardLocationName in Circuit Diagram
TG1 NG DM IC508
WORK RAM 64 M SDRAMTG2 NG DM IC509WORK RAM 64 M SDRAM
02C>AHy(4C
02C>AHy(4C
$ 
)4BCyG8C
Setting at the time of factory shipping.
• MASTER VOLUME:  MIN
• INPUT VOLUME:  MIN
• MODURATION WHEEL:  MIN (toward you)
• LINE IN/MIC TRIM VOLUME:  MAX
• AUX IN/LOOP RETURN TRIM VOLUME:  MIN
• SLIDER VOLUME:  MAX (top side) 
						

							Tyros3
11 2
Tu r nSW Name / DisplayNote Number
1 TYPE SELECT        C2 
2 MIC SETTING        C#2
3 SONG I             D2 
4 SONG II            D#2
5 SP1                E2 
6 SP2                F2 
7 REC                F#2
8 STOP               G2 
9 PLAY/PAUSE         G#2
10 REW                A2 
11 FF                 A#2
12 DEMO               B2 
13 VOCAL HARMONY      C3 
14 EFFECT             C#3
15 TALK               D3 
16 SONG III           D#3
17 SONG IV            E3 
18 SP3                F3 
19 SP4                F#3 
20 LOOP               G3 
21 METRONOME          G#3
22 LYRICS/TEXT        A3 
23 SCORE              A#3
24 POP & ROCK         B3 
25 BALLAD             C4 
26 DANCE              C#4
27 SWING & JAZZ       D4 
28 R & B              D#4
29 COUNTRY            E4 
30 LATIN              F4 
31 BALLROOM           F#4
32 MOVIE & SHOW       G4 
33 ENTERTAINER        G#4
34 WORLD              A4 
35 FILE ACCESS        A#4
36 TRANSPOSE –        B4 
37 TRANSPOSE +        C5 
38 MIXING CONSOLE     C#5
39 FADE IN/OUT        D5 
40 ACMP               D#5
41 OTS LINK           E5 
42 AUTO FILL IN       F5 
43 TAP TEMPO          F#5
44 TEMPO –            G5 
45 TEMPO +            G#5
46 M.PAD SELECT       A5 
47 M.PAD 1            A#5
48 M.PAD 2            B5 
49 M.PAD 3            C6 
50 M.PAD 4            C2 
51 M.PAD STOP         C#2
52 CHANNEL ON/OFF     D2 
53 INTRO I            D#2
54 INTRO II           E2 
55 INTRO III          F2 
56 MAIN A             F#2

Tu r nSW Name / DisplayNote Number
57 MAIN B             G2 
58 MAIN C             G#2
59 MAIN D             A2 
60 BREAK              A#2
61 ENDING/rit. I      B2 
62 ENDING/rit. II     C3 
63 ENDING/rit. III    C#3
64 SYNC STOP          D3 
65 SYNC START         D#3
66 START/STOP         E3 
67 BALANCE            F3 
68 UPPER OCTAVE –     F#3 
69 UPPER OCTAVE +     G3 
70 SA1                G#3
71 SA2                A3 
72 A                  A#3
73 B                  B3 
74 C                  C4 
75 D                  C#4
76 E                  D4 
77 DIRECT ACCESS      D#4
78 TAB <              E4 
79 TAB >              F4 
80 F                  F#4
81 G                  G4 
82 H                  G#4
83 I                  A4 
84 J                  A#4
85 EXIT               B4 
86 1-U                C5 
87 2-U                C#5
88 3-U                D5 
89 4-U                D#5
90 5-U                E5 
91 6-U                F5 
92 7-U                F#5
93 8-U                G5 
94 1-L                G#5
95 2-L                A5 
96 3-L                A#5
97 4-L                B5 
98 5-L                C6 
99 6-L                C2 
100 7-L                C#2
101 8-L                D2 
102 ENTER              D#2
103 FUNCTION           E2 
104 VOICE CREATOR      F2 
105 DIGITAL RECORDING  F#2
106 REC                G2 
107 STOP               G#2
108 PLAY/PAUSE         A2 
109 PREV               A#2
110 NEXT               B2 
111 SELECT             C3 
112 SETTING            C#3
Tu r nSW Name / DisplayNote Number
113 HARMONY ECHO       D3 
114 INITIAL TOUCH      D#3
115 SUSTAIN            E3 
116 MONO               F3 
117 DSP                F#3 
118 DSP VARIATION      G3 
119 INTERNET           G#3
120 PIANO              A3 
121 E.PIANO            A#3
122 ORGAN              B3 
123 STRINGS            C4 
124 CHOIR              C#4
125 BRASS              D4 
126 TRUMPET            D#4
127 SAXOPHONE          E4 
128 FLUTE/CLARINET     F4 
129 MUSIC FINDER       F#4
130 GUITAR             G4 
131 BASS               G#4
132 PERC./DRUM KIT     A4 
133 ACCORDION          A#4
134 PAD                B4 
135 SYNTH              C5 
136 ORGAN FLUTES       C#5
137 EXPANSION          D5 
138 USER DRIVE         D#5
139 REGIST BANK –      E5 
140 REGIST BANK +      F5 
141 FREEZE             F#5
142 MEMORY             G5 
143 OTS 1              G#5
144 OTS 2              A5 
145 OTS 3              A#5
146 OTS 4              B5 
147 PART SELECT LEFT   C6 
148 PART SELECT RIGHT1 C2 
149 PART SELECT RIGHT2 C#2
150 PART SELECT RIGHT3 D2 
151 REGIST. MEMORY 1   D#2
152 REGIST. MEMORY 2   E2 
153 REGIST. MEMORY 3   F2 
154 REGIST. MEMORY 4   F#2
155 REGIST. MEMORY 5   G2 
156 REGIST. MEMORY 6   G#2
157 REGIST. MEMORY 7   A2 
158 REGIST. MEMORY 8   A#2
159 LEFT HOLD          B2 
160 PART ON/OFF LEFT   C3 
161 PART ON/OFF RIGHT1 C#3
162 PART ON/OFF RIGHT2 D3 
163 PART ON/OFF RIGHT3 D#3 
						

							11 3 Tyros3
 FORMATTING HDD
1. While holding down the [F] button and [J] button, turn on the 
power switch.
2. The device information indication mode will be started and 
the following screen will be shown.
3. Press the [C] button to go to the internal HDD information 
indication screen. If unformatted, “UNFORMAT DISK” will 
be shown. If the HDD is formatted, the screen in procedure 5 
will be shown.
4. Press the [DEMO] button to execute formatting. “Formatting
…” will be indicated during formatting procedure.
5. Information of the internal HDD will be shown when the 
formatting is completed. The formatting is executed normally 
if “TYROS3_HD” is shown in the “Volume Name” fi eld. (If 
an error occurrs, only error message will be indicated.
  Refer to the error message list at the end of this section.)
%FWJDF
*OGPSNBUJPO




64#
4UPSBHF




%*..




*OUFSOBM
)%%
1SFTT

UP
RVJU
*%&
)%%
*OGPSNBUJPO
6/03.5
%*4,
1SFTT

UP
GPSNBU
1SFTT

UP
RVJU
6. Press the [START/STOP] button to start Read/Write test. A 
countdown indication from 10 to 1 will appear in the R/W 
test fi eld as the checking is executed. Countdown indication 
from 10 to 1 will appear three times as three types of 
checking is executed.
7. When the Read/Write test is completed successfully, “OK” 
will be shown in the R/W test fi eld. “NG” will be shown if 
an error is detected.
8. When the “OK” is displayed in the Read/Write test, the 
checking is fi nished. Turn off the power switch.

  · Unformatted  “UNFORMAT DISK”
  · Device error  “DEVICE ERROR”
  · HDD unrecognized  “NO DISK”
*%&
)%%
*OGPSNBUJPO
7FOEFS
*%
 
 /PU
FYJTU
1SPEVDU
*%
 
 45
3FWJTJPO
 
 -
$BQBDJUZ
 
 
4FSJBM
*%
 
 &YJTU
7PMVNF
/BNF
 
 5:304@)%
38
UFTU
 
1SFTT

UP
UFTU
1SFTT

UP
GPSNBU
1SFTT

UP
RVJU
*%&
)%%
*OGPSNBUJPO
7FOEFS
*%
 
 /PU
FYJTU
1SPEVDU
*%
 
 45
3FWJTJPO
 
 -
$BQBDJUZ
 
 
4FSJBM
*%
 
 &YJTU
7PMVNF
/BNF
 
 5:304@)%
38
UFTU
 
 0,
1SFTT

UP
UFTU
1SFTT

UP
GPSNBU
1SFTT

UP
RVJU 
						

							Tyros3
11 4
 SYSTEM RESET
There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset.
Factory Reset–Restoring the Factory Programmed Settings
This function lets you restore the status of the Tyros3 to the original factory settings.
1  Select the desired item to be restored by using [1pq]–[3pq] buttons and add a checkmark to it by pressing 
the [4 p] (MARK ON) button.
To remove the checkmark, press the [4q] (MARK OFF) button.
2  Press the [D] (FACTORY RESET) button to execute the Factory Reset operation for all checkmarked items.
Factory Reset 
(see below)Custom Reset 
(see page 126)
SYSTEM SETUPRestores the System Setup parameters to the original factory settings. Refer to the Data List for details 
about which parameters belong to the System Setup.
MIDI SETUPRestores the MIDI settings including the MIDI templates on the USER tab display to the original 
factory status.
USER EFFECTRestores the User Effect settings including the user effect types, user master EQ types, user 
compressor types, and user vocal harmony types created via the Mixing Console display to the 
original factory settings.
MUSIC FINDERRestores the Music Finder data (all records) to the original factory settings.
FILES & FOLDERSDeletes all fi les and folders stored in the USER tab display.
REGISTTemporarily deletes the current Registration Memory settings of the selected Bank. The same can 
be done also by turning the [POWER] button ON while holding the B5 key (rightmost B key on the 
keyboard).
EXPANSION VOICEDeletes all Expansion Voices. 
						

							11 5 Tyros3
Custom Reset–Saving and Recalling Your Original Settings as a Single File
For the items below, you can save your Original Settings as a Single File for future recall.
1  Make all desired settings on the instrument.
2  Call up the operation display.
[FUNCTION] g [I] UTILITY g TAB [t][u] SYSTEM RESET
3  Press one of the [F]–[I] buttons to call up the relevant display for sav-ing your data
4  Use the TAB [t][u] buttons to select one of the tabs (other than the PRESET) to which your settings will be 
saved.
5  Press the [6q] (SAVE) button to save your  le.
6  To recall your  le, press the desired [F]–[I] buttons in the SYSTEM RESET display, then select the desired  le.
[F] SYSTEM SETUP FILESParameters set on the various displays such as the [FUNCTION] g [I] UTILITY and 
microphone setting display are handled as a single System Setup fi le. Refer to the Data List 
for details on which parameters belong to the System Setup.
[G] MIDI SETUP FILESThe MIDI settings including the MIDI templates on the USER tab display are handled as a 
single fi le.
[H] USER EFFECT FILESThe User Effect settings including the user effect types, user master EQ types, user 
compressor types, and user vocal harmony types created via the Mixing Console displays 
are managed as a single fi le.
[I] MUSIC FINDER FILESAll the preset and created records of the Music Finder are handled as a single fi le. 
						

							Tyros3
11 6
 OS UPDATE
CAUTIONS
  • While updating the program software, do not turn off 
the power or do not pull out the USB memory.
  • It takes about 5 minutes to update the program 
software.
1 Preparation
Download the Tyros3 updated program from the 
download page on the YSISS home page to the USB 
memory.
(YSISS URL>>http://plaza.yamaha.co.jp/ysiss/
exindex.nsf)
(Insert the USB memory containing only the update 
program into the USB terminal of the Tyros3.)
Tools required for update:
USB memory
(containing only the update program to be installed)
The program software in the USB memory
w
*OTUBMMFS
 TYROS3INST.PRG
w
5IF
NBJO
CPEZ
PG
UIF
QSPHSBN
EBUB
	#PPU
QBSU

 TYROS3MAINBOOT.PRG
w
5IF
NBJO
CPEZ
PG
UIF
QSPHSBN
EBUB
 TYROS3mainprg1.prg - TYROS3mainprg5.prg
2  Executing the software update
2-1  Connect the USB memory to the Tyros3.
  Connect the USB memory containing only the update 
program data to the [USB TO DEVICE] terminal on the 
front panel.
 CAUTIONS: Make sure of the direction of the USB 
memory before inserting it.
  (The reverse insertion may cause the damage on the [USB 
TO DEVICE] terminal.)
  Do not turn off the power during the program update.
  Do not remove the USB memory from the [USB TO 
DEVICE] terminal until the update has been completed.
 
2-2  Installing the update program
2-2-1  Turn the power on with the [START/STOP] button 
pressed and held.
 
2-2-2  Keep pressing the [START/STOP] button until the 
following screen is displayed on the LCD.
 
2-2-3  After a while, the following screen is displayed.
  (Occasionally, it might take more time.)
 
  
						

							11 7 Tyros3
2-2-4  Press the [START/STOP] button to start the installation.
 
2-2-5  When the installations are fi nished, the following screen 
is displayed on the LCD.
 
2-2-6  Turn the power off.
3  Verifying the program version
3-1  Turn the power on with the [C2#], [F2] and [G2#] keys 
(C2# major chord) pressed and held.
 
C2# G2#
F2
POWERON /    OFF
3-2 “TEST” display appears, and the test mode starts.
3-3  Press the [TEMPO+] button or turn the [DATA ENTRY] 
dial clockwise to display “001: Version”.
3-4  Press the [START/STOP] button to display the version of 
each data.
3-5 Confi rm that the version of the main program is the same 
as the version installed this time.
3-6  Press the [START/STOP] button again to return to the 
wait state for test number.
4  Executing the factory set
4-1  Press the [TEMPO–] button or turn the [DATA ENTRY] 
dial counterclockwise to display “094:Factory Set”.
4-2  Press the [START/STOP] button to execute the factory 
set.
4-3 “Factory Set OK” appears on the LCD.
4-4  Press the [START/STOP] button again to return to the 
wait state for test number.
4-5  Press the [TEMPO+] button or turn the [DATA ENTRY] 
dial clockwise to display “063:Test Exit”.
4-6  Press the [START/STOP] button to reboot the Tyros3.
4-7  When the main screen appears normally, the factory set 
is completed. (Occasionally, it might take a few minutes.)
 CAUTION: Do not turn the power off before the main 
screen shows up.
4-8  Turn the power off.
5  Ending the program installation
  The program installation is completed here.
 
TROUBLESHOOTING
Q1.  Power has been turned off or the USB memory 
has been removed during operation.
A1. It is neccesary to re-installation the program. Perform the 
installation procedure from initial step.
Q2.  An error message appears on the screen and 
installation can not be performed.
A2.  Check the following points.
  ·  Is the USB memory is inserted properly?

·  Is not there any dirt on the USB memory terminal?

·  Does the USB memory contain the whole renewal data 
(program) in the root directory?

·  Is not any damage of the data (program) in the USB 
memory or the USB memory itself?

·  Is the renewal data (program) mactched with the 
model?

·  Perform reinstallation using another USB memory. 
						

							Tyros3
11 8
 INITIALIZING INTERNET SETTINGS
The settings of the Internet function are not initialized when using the Initialize operation of the instrument; Internet settings must be 
initialized separately, as explained here. Initializing will reset to the default values not only the settings of the browser, but also all 
settings you have made in the Internet Settings displays (except for the cookies and bookmarks), including those related to Internet 
connection.
1  Press the INTERNET buttons to connect the Internet.
 To close the website display and return to the operation display of the instrument, press the [EXIT] button.
2  Press the [5 q] (SETTING) button to call up the Internet Settings display.
3 TAB [t] [u] button to select the OTHERS.
4  Press the [1 pq] (UP/DOWN) buttons to select Initialize setup.
5  Use the [2 pq]/ [3 pq] (ENTER) buttons to initialize the Internet settings.
NOTE
Cookies and bookmarks still remain after executing this initialize operation.
To delete the cookies or bookmarks, select “Delete cookies” or “Delete all bookmarks” in step 4.
45
3
2 
						

							11 9 Tyros3
 DATA BACKUP
For maximum data security Yamaha recommends that you copy or save your important data to a USB storage device.
This provides a convenient backup if the internal memory is damaged.
1  Insert/connect the backup USB storage device (destination).
NOTE
Completing the backup/restore operation may take a few minutes.
2  Call up the operation display.
[FUNCTION] g [I] UTILITY g TAB [t] [u] OWNER
CAUTION
Move the Protected Songs which are saved to the USER display before restoring. If the songs are not moved, the 
operation deletes the data.
NOTE
To save the Song, Style, Multi Pad, Registration Memory Bank and Voice independently, execute the Copy & Paste 
operation from the File Selection display.
3  Press the [D] (BACKUP) button to save the data to the USB storage device.
To restore the data, press the [E] (RESTORE) button in this display.
NOTE
To save the Music Finder Record, Effect, MIDI Template and System File, call up the operation display: [FUNCTION] g 
[I] UTILITY gTAB [t] [u] SYSTEM RESET. For more information, refer to the Reference Manual on the website.
2
3 
						

							Tyros3
120
 DISPLAY MESSAGES
[BOOTER]
Displayed message Meaning Progress/status How to service
Now loading. Please wait a while...Data is being loaded. Wait a 
while.The installer fi le is being loaded.
Media error! Media error!Installer fi le loading error (media error)
Failed in loading the installer fi le
Part of the media is damaged (I/O error)Replace the installation media and 
retry.
Installer program checksum error! Installer checksum error!Installer fi le loading error (checksum error)
Checksum in the installer fi le disagrees.
File damaged
Tampered
Store the installation fi le again or 
replace the installation media and 
perform reinstallation. Please eject the media. Remove the media. When an error occurs
Please insert the Installer media. Install the installation media.A media containing the installer is not connected 
when the booter is started.
Installer program not found! No installer found.When the installation fi le is undetected
The installer fi le corresponding to the 
instrument is not found
Installer program data error! Installation program error!The installer is defective
File damaged
Tampered
Version mismatch
Installer program data mismatch! Installation updater error!When the installer is mismatched
Loading of an installer for a different model has 
been attempted
Loading of an installer for a version which 
cannot be updated has been attempted
Program error! Program error!Starting is disabled because the main program 
has not been detected
The instrument program has not been installedPerform reinstallation.
Please install the program. Install the program. same as above
Error! Unformatted or incompatible data.Unformatted or unsupported 
error!The installer cannot be loaded from the installer
The media is not formatted in any one format of 
FAT12, FAT16 or FAT32
Unformatted
System area in the media is damagedFormat the media in FAT12, FAT16 
or FAT32 system.