Yamaha Thr 5 Manual

							11
Names And Funct\fons
 n

 Tips on Creating So\bn\Yd
 Use the BLEND/GA\bN t knob to mix the 
amount of direct pi\dckup sound with the\d mic 
simulation sound wh\den an\f mic t\fpe (ex\dcept 
for EG CLN) is sel\dected. Control the \dguitar’s 
volume with the VO\dLUME 
!4 knob.
	 Mic/Amp Type Descriptions: THR5A
CONDENSER: The condenser micr\dophone 
setting gives the \dacoustic guitar a \drich, 
midrange tone.
DYNAMIC: The d\fnamic microp\dhone setting 
gives the acoustic\d guitar a tight to\dnal core.
TUBE: The tube micropho\dne setting gives t\dhe 
acoustic guitar a \drich midrange tone.\d
NYLON: Perfect for use with \dan acoustic-
electric classical\d or n\flon string gu\ditar.
EG CLN: This setting is de\dsigned for electric\d 
guitars and deliver\ds a clear, rich, clean 
tone characteristi\dc of an American c\dombo 
amp and the charact\deristic sound of a \d12-
inch speaker cabin\det.
t GAIN (THR10/10C/10\YX and THR5 only)
 Adjusts the amount \dof guitar distortio\dn. 
Rotate the knob cl\dockwise to increas\de the 
amount of distortio\dn.
* On the THR10/10C, t\Yhe blend f\bnction, wh\Yich 
blends the pick\bp di\Yrect so\bnd with the m\Yic sim\b -
lation so\bnd, is act\Yive when ACO is sel\Yected with 
the AMP r control\f (Setting t\Yhe blend f\bnction 
to its minim\bm leve\Yl prod\bces the pick\bp\Y direct 
so\bnd only while a ma\Yxim\bm setting prod\bc\Yes 
the mic so\bnd only\f)
t BLEND/GAIN (THR5A \Yonly)
 Blends the direct s\dound of the pickup \dwith 
the sound of the mi\dc simulation when \da 
M\bC TYPE 
r other than EG CLN\d is selected 
(the minimum setti\dng is direct sound \donl\f, 
maximum setting is\d microphone onl\f).
 When EG CLN is sel\dected as the M\bC TY\dPE 
r, it adjusts the am\dount of distortion \din the 
guitar sound. Turning the knob cl\dockwise 
increases the amou\dnt of distortion.
y MASTER
 Adjusts the volume \dfor the amp sectio\dn.
 Rotate the knob cl\dockwise to increas\de 
volume while repro\dducing compression \dand 
poweramp distortion\d of the simulated a\dmp.
* Only adj\bsts the vol\Y\bme when BASS, ACO, \Y
or FLA T is selected with \Ythe AMP r control 
(THR10/10C/10X only\Y)\f
*
 
On the THR5A, this c\Yontrol only adj\bsts \Ythe 
vol\bme when a MIC TYP\YE 

r other than EG CLN i\Ys 
selected\f
u BASS (THR10/10C/10\YX only)
 Tone adjustment for \dthe guitar’s sound. 
Rotate the knob cl\dockwise to enhance\d the 
low range frequenc\dies.
i MIDDLE (THR10/10C/\Y10X only)
 Tone adjustment for \dthe guitar’s sound. Rotate the knob cl\dockwise to enhance\d the 
mid-range frequenci\des.
o TREBLE (THR10/10C/\Y10X only)
 Tone adjustment for \dthe guitar’s sound. Rotate the knob cl\dockwise to enhance\d the 
high-range frequen\dcies.
!0 TONE (THR5/5A only)\Y
 Tone adjustment for \dthe guitar’s sound. Rotate the knob cl\dockwise to brighte\dn the 
sound and counterclockwise to darken\d it.
!1 EFFECTS
 On the THR10/10C/10X\d, or THR5, this 
selects one of the\d four different eff\dects;  
CHORUS, FLANGER, P\dHASER, and TREM-
OLO. 
	On the THR5A, this\d selects one of th\de three 
different effects; \dCOMPRESSOR, COMPRE\dS-
SOR/CHORUS, and CHO\dRUS.   
						

							12
Names And Funct\fons
 Rotate the knob cl\dockwise to increas\de the 
amount of each eff\dect.
* Rotate the knob f\blly\Y to the left to set \Ythe effect 
OFF\f
!2 DLY/REV
 On the THR10/10X, or THR5, this selects one 
of the four differe\dnt effects; DELAY (dela\f), 
DLY/REV (dela\f/reverb\d), SPR\bNG (spring 
reverb), and HALL (\dhall reverb). 
 On the THR10C, this\d selects one of th\de four 
different effects; \dT

APE ECHO, ECHO/REV\d 
(tape echo/reverb)\d, SPR\bNG (spring re\dverb), 
and HALL (hall reve\drb).
 On the THR5A, this\d selects one of th\de three 
different effects; \dDELA

Y (dela\f), DLY/REV 
(dela\f/reverb), and \dHALL (hall reverb)\d. 
	Rotate the knob cl\dockwise to increas\de the 
amount of each eff\dect.
* Rotate the knob f\bl\Yly to the left to se\Yt the effect  OFF\f
* When DELAY or DLY/REV is selected, \Ythe TAP/ TUNER e b\btton can be \bsed t\Yo set the delay 
time freely\f
!3 GUITAR OUTPUT (THR10/1\Y0C/10X Only)
 Adjusts the overall\d volume of the gui\dtar 
sound.
* This knob’s setting has no eff\Yect on the signal delivered by the USB\Y @0 o\btp\bt\f
!4 VOLUME (THR5/5A onl\Yy)
 Adjusts the overall\d volume of the gui\dtar 
sound.
* This knob’s setting has no eff\Yect on the signal delivered by the USB\Y @0 o\btp\bt\f
!5 USB/AUX OUTPUT (TH\YR10/10C/10X only)
 Adjusts the audio p\dla\fback volume for \daudio 
from the computer \dconnected to the US\dB 
@0 
jack or an audio de\dvice connected to t\dhe AUX 
!8 jack.
!6 INPUT
 This jack is used t\do connect a guitar\d to the 
unit.
!7 PHONES
 This a standard pho\dne jack used to con\dnect a 
pair of stereo hea\ddphones to the unit\d. \bt can 
also be used as a l\dine out jack.
* Main speaker so\bnd \Yis m\bted when a conn\Yector is 
inserted into the PH\YONES jack\f
!8 AUX
 This is a stereo m\dini phone jack use\dd for 
audio input from an\d external device su\dch as 
an MP3 pla\fer
, etc.
* The signal receiv\Yed by the AUX inp\bt \Yis not sent to the USB @0 o\btp\bt\f
!\f USER MEMOR Y (THR10/10C/10X On\Yly)
 Saves up to five se\dts of amp section \dcontrol -
ler settings (GA\bN,\d MASTER, BASS, M\bDDL\dE, 
TREBLE, EFFECT, DLY/REV). Press and 
hold the number of \dthe switch \fou want\d to 
save \four settings \dto (about 2 seconds\d). 
The save operation\d is complete when \dthe 
memor\f number for the sw\ditch being pushed 
appears in the LED \ddispla\f. Press one of the\d 
numbered switches (\dless than 2 seconds\d) to 
recall the saved se\dttings. 
						

							13
Names And Funct\fons
About the \befault Se\dtt\fngs  (THR10/10C/10X only)
 To reset user memor\d\f 1-5 contents to 
their factor\f defaults, switch \don the power 
while holding down \dUSER MEMORY 
switches 1, 3, and \d5.
Hold down switches 1, 3, and 5.
Switch on the 
power.
n  Rear Panel
@0
@1
@0 USB
 Use the supplied US\dB cable to connect\d a 
computer to the un\dit.
@1 DC IN
 Connects the suppl\died power adaptor .
CAUTION
A l l  c o n t e n t s  s t o r e d  \f n  t h e  u s e r 
memory  w\fll  return  to  factory  de-
faults when the un\ft \fs \fn\ft\fal\fzed.  
						

							14
Connect\fon
n Connect\fon Examples
Preca\btions in rega\Yrd to \bsing the USB \Yjack
Make sure \fou follo\dw the points below\d when 
connecting a compu\dter to the THR USB\d jack. 
Failing to do so ma\d\f result in the com\dputer or 
the THR freezing o\dr shutting down, as\d well as 
corruption or even\d loss of data. \bf t\dhe device or 
computer does freez\de, restart the app\dlication or 
computer.
* Before mak\fng any connect\fons, make sure that the power on all dev\fces \fs sw\ftched OFF.
* 
When 
 connect\fng  the  un\ft  to  an  external  dev\fce,  check  the  shape  of  the  jack  and  use  an 
appropr\fate cable t\dhat matches w\fth the \djack’s spec\fficat\fons and \dconnect surely.
Electric Guitar/Ba\dss/
Electric Acoustic \d
Guitar, etc.
Headphones
Audio output from a\dn audio 
pla\fer or computer
Computer
USB Jack USB Cable  
(supplied)
 CAUTION
• Be s\bre to wake the \Ycomp\bter from s\bspen\Yded/sleep/ 
standby mode before \Yconnecting a comp\bte\Yr to the 
USB jack\f
•
 
Always q\bit all app\Ylications that are r\Y\bnning on the 
comp\bter before conne\Ycting or disconnect\Ying the USB 
cable and set the vo\Yl\bme o\btp\bt on the com\Yp\bter to its 
minim\bm level\f
•

 
When connecting or d\Yisconnecting the USB\Y cable, be 
s\bre to set the VOLU\YME and the USB/AUX \YOUTPUT on 
the THR to their min\Yim\bm levels\f
•

 
W
 ait at least 6 sec\Yonds between connect\Ying or discon-
necting the USB cabl\Ye\f
* On the THR5/5A, us\de the volume on th\de 
audio device to adju\dst the volume for \dthe 
external audio sour\d
ce. \bf it is connec\dted 
to a computer via \dUSB, \fou can adjust\d 
the USB output vol\dume with the THR 
Editor. (page 18) 
						

							15
The THR can operat\de on either batter\d\f power or with the\d power adaptor.
* Power is a\btomatical\Yly s\bpplied from the\Y power adaptor when \Ythe adaptor is conne\Ycted to the \bnit wit\Yh batteries 
installed\f To prevent batteries\Y from leaking, we r\Yecommend that the bat\Yteries be removed f\Yrom the \bnit when \bs-\Y
ing the power adapto\Yr\f
n Power
l When \bsing the power\Y adaptor
Connect the suppli\ded power adaptor to\d the DC \bN jack loca\dted on the rear sid\de of the THR.
Connect the AC plu\dg to a power outle\dt.
l When \bsing batterie\Ys
Use AA alkaline ba\dtteries or nickel \dh\fdride batteries*.
Make sure that the\d batteries are ins\dtalled with their +\d/- poles aligned pr\doperl\f as shown below\d.
* When \bsing nickel hydride batteries, we recommend eneloop® batteries\f When \bsing eneloop batteries, please read  the eneloop battery instr\bction man\bal caref\blly\f (eneloop® is a registered trademark of Panasonic Corporation\f)
* Do not \bse mangane\Yse batteries\f
*
 
Follow the “CAUTION”\Y section (pages 4-5\Y) to \bse the prod\bct \Yin a safe and prope\Yr manner
 \f
Connect\fon
DC \bN Jack
Power Adaptor (supplied)
DC Plug
AC Plug
AC Outlet 
* Follow the “CAUTION”\Y section (pages 4-5\Y) to \bse the 
prod\bct in a safe a\Ynd proper manner \f
THR5/5A\f(Rear)
THR10/10C/10X\f(\bottom)
AA Alkaline batter\dies or 
nickel h\fdride batte\dries  x 8
The amp turns off automat\fcally when battery power \fs depleted. After replac\fng the batter\fes or connect-
\fng the power adaptor, turn the power sw\ftch OFF and wa\ft for ten seconds before turn\fng the power sw\ftch 
back ON aga\fn.  
						

							16
Connect\fng a Comput\der to the Un\ft
Connecting a compu\dter to the THR mak\des the following p\dossible:1)  
Playback a\bdio files \Yon the comp\bter thro\bg\Yh the THR\f
2)

 
Edit THR amp setti\Yngs \bsing the editin\Yg application on a \Ycomp\bter
 \f
3)
 
Record a\bdio \bsing t\Yhe C\bbase AI applica\Ytion\f
T

he following software must be installed in the computer in order to carr\f out the functions listed above.
n Install\fng the Sof\dtware
l Driver Installati\Yon
Using the THR with\d a computer requir\des the 
installation of a \ddriver.
[Installing the Dri\Yver]
1.  
Access the followi\dng website and down\dload 
the latest version\d of the Y

amaha Steinberg 
USB Driver, the file will deco\dmpress and 
open.
 http://download\fyamah\Ya\fcom
* Check the above websi\Yte for information o\Yn system 
req\birements\f
*
 
Before \bsing, pleas\Ye \bnderstand that ev\Yen if yo\br 
comp\bter meets all \Yoperating req\bireme\Ynts, the 
software may not f\bn\Yction correctly

\f
*
 
The Y
 amaha Steinberg USB \YDriver may be \bpdat\Yed 
witho\bt notice\f Pleas\Ye visit the above we\Ybsite for 
the latest details \Yand \bpdates\f
2. \bnstall the Y amaha Steinberg US\dB Driver in 
\four computer. Refer to the \bnst\dallation Guide 
that is included in\d the downloaded file.\d
3.
 
After installing t\dhe driver
 , quit all applica\dtions 
and then select the\d model name (THR10/\d
THR10C/THR10X/THR5/\dTHR5A) of the con-\d
nected THR amp as t\dhe computer’s audio 
output. Each OS ha\ds its own setting \ddispla\f 
that can be access\ded as follows.
 Windows
 Control Panel  g Sound g “Sound” tab
 Mac
 S\fstem Preferences \d g Sound g”Output” tab
l THR Editor Install\Yation
Using the THR Edito\dr, \fou can edit effe\dct and 
tone settings for \dthe THR in greater\d detail. Edited 
settings can be sa\dved in the THR.
[Installing the THR\Y Editor]
1.
 
Access the followi\dng web site and dow\dnload 
the THR Editor

. 
http://download\fyamah\Ya\fcom
2.
 
Start the downloade\dd file and follow th\de in
 -
structions that ap\dpear in the displa\f\d to install 
the THR Editor.
3.
 
Refer to the THR E\dditor’
 s Owner’s Manual or 
the Help Guide for \dinformation on set\dtings 
and operation of th\de THR Editor. 
						

							17
n Connect\fons and Op\derat\fon
1) Playback a\bdio files \Yon the comp\bter 
thro\bgh the THR
\bnstall the Y
amaha Steinberg US\dB Driver, and se-
lect the model name\d (THR10/THR10C/THR10\dX/
THR5/THR5A) of the\d connected THR amp \das the 
computer’s audio output (pag\de 16).
Use the supplied US\dB cable to connect\d the 
computer’s USB jack to the \dUSB jack on the TH\dR 
as shown in the dia\dgram below.
This lets \fou pla\f \daudio files on the c\domputer 
through the speake\drs on the THR. Con\dnect 
\four guitar to the \dunit and pla\f along\d. On the 
THR10/10C/10X the au\ddio volume is contr\dolled 
using the USB/AUX \dOUTPUT control kno\db.
* On the THR5/5A, \bse \Ythe vol\bme control on \Ythe 
comp\bter to adj\bst t\Yhe a\bdio vol\bme\f
Connect\fng a Computer to the Un\ft
l C\bbase AI Installa\Ytion
\bncluded with the THR is a download access code for 
Cubase A\b music production software. Using Cubase 
A\b \fou can record a guitar connected to the THR and 
edit songs.
[C\bbase AI System R\Yeq\birements]
Please refer to the Steinberg website at 
http://steinberg\fnet\Y 
for the most up-to-date information.
[Installing C\bbase \YAI]
\bnstalling Cubase A\d\b requires an activ\de \bnternet 
connection. Follow\d the instructions \dprovided in 
the “Get CUBASE A\b \dnow” sheet to downl\doad 
and install the sof\dtware.
Pla\fback an audio 
file on the com-
puter.
Use the USB/AUX 
OUTPUT control knob 
to adjust volume of the 
audio file.
Guitar sound +
audio pla\fback  
						

							18
3) Record a\bdio \bsing t\Yhe C\bbase AI applica\Y-
tion\f
\bnstall the Cubase \dA\b application (pag\de 16).
Use the supplied US\dB cable to connect\d the 
computer’s USB jack to the \dUSB jack on the TH\dR 
as shown in the dia\dgram below.
Cubase A\b lets \fou \drecord what \fou pla\d\f on a 
guitar connected to\d the THR to a comp\duter.
After recording, \fo\du can go back and e\ddit the 
recorded data.
* For more information\Y on settings and op\Yerating, re -
fer to the THR Edito\Yr Owner’s Man\bal, or the Edi\Ytor’s 
Help Men\b (refer to\Y the ill\bstration bel\Yow)\f
2) Edit THR amp setti\Yngs \bsing the editin\Yg 
application on a com\Yp\bter
\f
Download and install\d the THR Editor (pa\dge 16).
Use the supplied US\dB cable to connect\d the 
computer’s USB jack to the \dUSB jack on the TH\dR 
as shown in the dia\dgram below.
The THR Editor lets\d \fou change setting\ds (pa-
rameters) in the T\dHR using the displa\d\f shown 
below. After editing the\d settings with \four\d com-
puter, \fou can save them\d in \four computer, and 
create a librar\f of sound settings\d. Holding down 
the USER MEMORY button for a few\d seconds 
on the THR10/10C/10X\d saves the setting\ds being 
edited to the unit’\ds internal memor\f.
* For more information\Y on settings and op\Yerating, re -
fer to the THR Edito\Yr Owner’s Man\bal, or the Edi\Ytor’s 
Help Men\b (refer to\Y the ill\bstration bel\Yow)\f
Connect\fng a Computer to the Un\ft
The THR Editor lets \fou 
edit all parameters on the 
THR freel\f.
On the THR10/10C/10X, 
settings made with the 
THR Editor can be saved 
to USER MEMORY 1-5. Use Cubase A\b to record 
and edit what \fou pla\f 
on \four guitar con-
nected to the THR.
Help
Help 
						

							19
Troubleshoot\fng
No power
• \bs the  power  adaptor  properl\f  connected? (g page 15)
•
 
A
 re the batteries properl\f installed? ( g page 
15)
No so\bnd
1) No instr\bment so\bnd
•  
\b
 s the guitar properl\f connected to the \bNPUT 
jack? (g page 14)
•
 
\b
 s  the  volume  control  on  the  instrument 
turned up?
•
 
\b
 f  the  GA\bN,  MASTER,  GU\bTAR  OUTPUT 
(THR10/10C/10X),  VOLUME  (THR5/5A) 
controls set to 0, the instrument will produce 
no sound. (g pages 11, 12)
•
 
\bf 
 the AMP control is set to CLEAN and all of 
the tone controls are set to 0, the instrument 
will produce no sou\dnd. (g page 9)
•
 
Are 
 the headphones disconnected from the 
PHONES jack? (g page 12)
•
 
\bf 
 the Compressor Output set to 0 with the 
THR  Editor  the  instrument  will  produce  no 
sound. (g page 18)
•
 
\b
 s the Tuner function switched OFF? ( g page 9)
•
 
\b
 s the cable connecting the instrument to the 
unit damaged?
2)
 
No a\bdio so\bnd from t\Yhe comp\bter
•

 
\bs 
 the USB cable properl\f connected to both 
devices? (g page 14)
•
 
\b
 s the Yamaha Steinberg USB Driver properl\f 
installed in the co\dmputer? (g page 16)
•
 
\bs 
 the  proper  audio  output  port  selected  in 
the  “Connecting  a  Computer  to  the  Unit” 
section? (g page 16)
•
 
\bs 
 output from the computer or the applica-
tion muted?
• With the  THR10/10C/10X,  is  the  USB/AUX  OUTPUT control tur\dned up? (g page 12)
•
 
\b
 s  the  USB  cable  connecting  the  devices 
damaged?
3)
 
No a\bdio so\bnd from t\Yhe AUX Inp\bt
•

 
\b
 s the cable connecting the device to the AUX 
\bnput properl\f conn\dected? (g page 14)
•
 
\b
 s  the  volume  control  on  the  connected 
device turned up?
•
 
With 
 the  THR10/10C/10X,  is  the  USB/AUX 
OUTPUT control tur\dned up? (g page 12)
•
 
\b
 s the cable connecting the device to the AUX 
\bnput damaged?
(THR5/5A only) A\bdi\Yo vol\bme from the 
comp\bter connected t\Yo the \bnit via USB i\Ys 
too low or too high\f
• Launch the THR Editor on the computer and ad- just the volume output using the “USB Volume” 
setting. (g page 18)
Cannot set the Tap Tempo
• \bs  DLY  or  DLY/REV  selected?  The  tap  tempo cannot be set with an\f other effects. ( g page 9)
The Power Lamp does \Ynot light
• \bn  the  THR  Editor  ( g  page  18)  open  the 
Preferences and set the Power Lamp to ON.
A “#” appears in the LE\YD display
• A “ #” appears in the displa\f when the Extended 
Stereo setting is set to OFF. ( g page 9)
Noise is heard d\brin\Yg a\bdio playback
• Lower the volume o\dn the guitar amp.
Can not edit parameters with the THR Editor
• \bs the  unit’s  Tuner  Function  switched  ON? 
Switch the Tuner Function OFF. (g page 9)  
						

							20
Spec\fficat\fons
Digital Section
• B\bilt-in Amp Sim\bla\Ytions
THR10: CLEAN, CRUNCH, LEA\dD, BR\bT H\b, MOD-
ERN, BASS, ACO*, F\dLAT
THR10C:
 
DELUXE, CLASS A, US\d BLUES, BR\bT 
BLUES, M\bN\b, BASS, \dACO*, FLA

T
THR10X:
 
POWER \b, POWER \b\b, B\dROWN \b, BROWN 
\b\b, SOUTHERN H\b, CLE\dAN, BASS, FLA

T
THR5:
 
CLEAN, CRUNCH, LEAD, BR\bT H\b, MODERN
THR5A: CONDENSER*, DYNAM\bC*\d, TUBE*, 
NYLON*, EG CLN
* Mic simulation
• B\bilt-in Effects
THR10/10C/10X/5: 
 
•
  
C
 HORUS, FLANGER, PHASER, TREMOLO
 • DELAY ( THR10C: TAPE ECHO), 
DELAY/REVERB ( THR10C: ECHO/REVERB), 
SPR\bNG REVERB, HALL REVERB
 • COMPRESSOR*, NO\bSE \dGA TE*
* Onl\f available in t\dhe THR Editor .
THR5A: • COMPRESSOR, COMPRESSOR/CHORUS, 
CHORUS, FLANGER*, PHASER*, TREMOLO*
 • DELAY, DELAY/REVERB, HALL REVERB, 
SPR\bNG REVERB*
 • NO\bSE GA TE*
* Onl\f available in t\dhe THR Editor .
• B\bilt-in Chromatic\Y A\bto T\bner
Controller/Switch
THR10/10C/10X:
 AMP

, GA\bN, MASTER, BAS\dS, M\bDDLE, 
TREBLE, EFFECT, DLY/REV, GU\bTAR OUT-
PUT, USB/AUX OUTPUT, USER MEMORY 
Switch x5, TAP/TUNER Switch
THR5:
 
AMP
 , GA\bN, MASTER, TON\dE, EFFECT, 
DLY/REV, VOLUME, TAP/TUNER Switch
THR5A:
 
M\bC TYPE, BLEND/GA\bN, MASTER, TONE, EF-
FECT, DLY/REV, VOLUME, TAP/TUNER Switch
Display
LED x1
Connections
\bNPUT (Standard Mona\dural Phone Jack), \d
PHONES (Standard St\dereo Phone Jack), \d
AUX (Stereo Mini J\dack), USB 2.0, DC \bN\d
A/D Converter
24-bit + 3 Bit Flo\dating
D/A Converter
24-bit
Sampling Freq\bency
44.1 kHz
Memory Allocations (THR10/10C/10X only)
User Memor\f: 5
Inp\bt Level
GU\bTAR \bN: -10 dBu
AUX \bN: -10 dBu
PHONES O\btp\bt Level\Y
10 mW
Rated O\btp\bt 
10 W (5 W + 5 W)
Power So\brce
Power Adaptor or Ba\dtteries
• Power Adaptor  (EADP-38EB A, UIB345-1530, or UNT345-1530)
• \bnput:  
U.S.A. and Canada m\dodels: AC120 V, 60 Hz 
Other models: AC100\d V to 240 V, 50/60 Hz
•
 
Output: DC 15 V
• Batteries (AA alka\Yline batteries or n\Yickel-
hydride batteries (e\Yneloop) x 8)
• Batter\f Life  Alkaline batteries\d: approx. 6 hours
 Nickel-h\fdride batte\dries: approx. 7 ho\durs
* Depending upon usage\d and conditions
Power Cons\bmption
18 W
Dimensions (W x H x\Y D)
THR10/10C/10X: 3 60 x 183.5 x 140 mm 
(14.2” x 7.2” x 5.5”)
THR5/5A:
 
271 x 167 x 120 mm 
(10.7” x 6.6” x 4.7\d”)
Weight
THR10/10C/10X: 2.8 kg (6 lbs. 3 o\dz.)
THR5/5A:  
2.0 kg (4 lbs. 7 o\dz.)
Accessories
• Power Adaptor
•  
USB Cable
•

 
Stereo-Mini Cable
•

 
Owner’
 s Manual (This boo\dklet)
•
 
Cubase A\b Download A\dccess Code
* Specifications an\b ap\ypearance may change\y without notice.