Home > Yamaha > Projector > Yamaha Projector Dpx 830 User Manual

Yamaha Projector Dpx 830 User Manual

Here you can view all the pages of manual Yamaha Projector Dpx 830 User Manual. The Yamaha manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1

DPX-830
Digital Cinema Projector
Projecteur Cineme Numerique
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES BRUKSANVISNING
GEBRUIKSAANWIJZINGYAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADAYAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANYYAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70...

Page 2

i
IMPORTANT SAFETY INSTRUCTIONS
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to alert 
you to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an equilateral 
triangle is intended to alert you to the presence of 
important operating and maintenance (servicing) 
instructions in the...

Page 3

ii
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Yamaha Electronics Corporation
Address: 6660 Orangethorpe Avenue
Buena Park, CA90620
Telephone: 714-522-9105
Fax: 714-670-0108
Type of Equipment: Projector
Model Name: DPX-830
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that...

Page 4

iii
Caution: Read this before operating this unit.
Warning
• This unit must be grounded
 Do not use this projector in a computer room
This projector is not for use in a computer room as defined in 
the Standard for the Protection of Electronic Computer/Data 
Processing Equipment, ANIS/NFPA 75.
 Unplug immediately if there is something wrong with 
your projector
Do not operate if smoke, strange noise or odor comes out of 
the projector. It might cause fire or electric shock. If this 
happens, unplug...

Page 5

1
1 Getting started 2
Inappropriate places for installation .....................2
Accessory check ..................................................3
Inserting the batteries into the remote control......4
2 Controls and functions 5
Projector overview ...............................................5
Remote control overview .....................................6
Using the picture quality adjusting buttons .....6
3 Using the remote control 7
Operational range...

Page 6

2
◆Inappropriate places for installation
If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to 
install this unit by avoiding the places listed below.
1. Places where the temperature and humidity vary greatly
 Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely 
low.
 This unit must be used within a temperature range of 41°F...

Page 7

3
◆Accessory check
The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package.
Important
 The supplied power cables are to be used exclusively for this product. Never use them for other products.
 The power cables for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.
 The provided power cable for the U.S. is rated at 120 V. Never connect this cable to any outlet or power supply...

Page 8

4
◆Inserting the batteries into the remote control
1. Remove the rear lid of the remote control.
2. Check the polarity markings (+, –) of the batteries, and set 
them correctly, inserting their (–) side first.
 If the battery is inserted from the (+) side first, inserting the (–) 
side becomes difficult because the coil spring end hits on the 
battery side. If the battery is forced to insert in this way, the 
outer label of the battery may get ripped and cause a short-
circuit and heating.
3. Attach the...

Page 9

5
◆Projector overview
1. FOCUS ring
2. ZOOM ring
3. Control panel 
4. Air intake vent
5. Remote control sensor (Front)
6. Air intake vent
7. Air exhaust vent
8. Adjustment foot (Front)
9. Lamp cover (see page 33)
10. Adjustment feet (Rear)
11. Foot adjustment buttons (Left/Right)
12. Air intake vent
Control panel1. STANDBY/ON,  button
2. AUTO SYNC,   button
3. D-SUB/HDMI,  button
4. MENU button
5. STATUS indicator
6. POWER indicator
7. KEYSTONE, ENTER button
8. VIDEO/S/COMP.,  button
9.  button...

Page 10

6
◆Remote control overview
1. IR signal transmitter
2. ON ( I ) button
3. AUTO button
4. NORMAL button
5. HDMI button
6. D-SUB button
7. Cursor buttons ( / / / )
8. MENU button
9. MEMORY buttons
10. The picture quality adjusting buttons*
* See the below for the picture quality adjusting buttons.
11. STANDBY ( ) button
12. HIDE button 
13. ASPECT button
14. S. ZOOM  (Smart zoom) button
15. SQUEEZ (Squeeze) button
16. VIDEO button
17. COMP. (Component) button
18. S-VIDEO button
19. ENTER button
20. KEYSTN...
Start reading Yamaha Projector Dpx 830 User Manual

Related Manuals for Yamaha Projector Dpx 830 User Manual

All Yamaha manuals